MCHOSE K7 V2 Ultra+

Contents

MCHOSE K7 V2 Ultra+ Wireless Gaming Mouse

Professional-Grade Flagship Full-Competition Mouse

1. Introduction

The MCHOSE K7 V2 Ultra+ is a professional-grade wireless gaming mouse designed for competitive esports. It features a high-performance PAW3955 TI flagship sensor, an impressive 8K polling rate, and up to 50000 DPI for unparalleled precision and responsiveness. With its lightweight design, advanced Pterosaur architecture, and convenient magnetic wireless charging dock, the K7 V2 Ultra+ delivers a superior gaming experience.

MCHOSE K7 V2 Ultra+ Wireless Gaming Mouse in white and black with its RGB magnetic wireless charging dock.

MCHOSE K7 V2 Ultra+ Wireless Gaming Mouse and Charging Dock

2. Product Features

  • PAW3955 TI Flagship Sensor: High-speed flickering and sharp turns have a higher upper limit, ensuring no frame loss during high-speed gaming operations.
  • 50000 Overclocking DPI: Extreme precision for competitive play.
  • 8K Polling Rate: Wired 8K and Wireless 8K polling rate for ultra-low latency.
  • Nordic 54L Main Control Chip: Dual-chip specially tuned main controller for stable, fast, and responsive performance.
  • Brand-new Pterosaur Architecture: Optimized for consistency between left and right buttons, reinforced support structure for smooth combos, and better rebound response.
  • Super Glide Glass Coating 2.0: Enhanced skin-friendly texture, more resistant to sweat and oil.
  • RGB Magnetic Wireless Charging Dock: Convenient and stylish charging solution.
  • Global Anti-interference Algorithm: Unafraid of interference from complex environments.
  • Next-generation Wireless Transmission Technology: MCHOSE® TOPSPEED WIRELESS Wireless Technology 2.0.
  • Lightweight Design: Approximately 59g gross weight.
  • Electroplated Side Keys: Exuding a premium texture.
Infographic highlighting key features: MCHOSE 'Shadow Hunter' solution, next-generation wireless transmission, PAW3955 TI flagship sensor, Pterosaur architecture, global anti-interference algorithm, 50000 overclocking DPI, RGB Magnetic Wireless Charger, Super Glide glass coating 2.0, Gold-plated PCB, Electroplated widening and side key design.

Key Features of the MCHOSE K7 V2 Ultra+ Mouse

MCHOSE K7 V2 Wireless Gaming Mouse product video showcasing its features and use.

3. Package Contents

The package for the MCHOSE K7 V2 Ultra+ includes:

  • Magnetic Wireless Charging Dock x 1
  • Receiver x 1 (8K NANO Receiver)
  • Parachute Rope Data Cable x 1
  • Anti-slip Sticker x 1
  • Function Card x 1
  • Warranty Card x 1

4. Specifications

Attribute K7 V2 Ultra+
Model K7 V2 Ultra+
Color Options Black Gold / White Gold / Blue Gold / Pink Gold
Recommended Grip Medium to Large Hands
Dimensions Approx. 127.1mm * 63.8mm * 39.8mm
Solution MCHOSE Full-Stack Self-Developed "Shadow" Solution
Sensor PAW3955 TI Custom Flagship Sensor
Super Wide Mode Full Range ≥ 20000fps
Main Controller Nordic 54L Main Controller Chip
Transmission Technology MCHOSE® TOPSPEED WIRELESS Wireless Technology 2.0
Craftsmanship Immersion Gold PCB + Electroplated Side Buttons + Aluminum Alloy High-Gloss Scroll Wheel
Coating Imported Super Glide Glass Coating 2.0
Weight Approx. 59g
Micro-switches 100 Million Times Omron Mechanical Micro-switches
Driver Fully Self-Developed M HUB (Client / Web Version)
Polling Rate Wired 8K + Wireless 8K
Scroll Wheel TTC Golden Wheel
Max DPI 50000 (Overclocked)
Battery Capacity 500mAh
Receiver Standard 8K NANO Receiver
Connection Type Wired / 2.4G / Bluetooth
Detailed specifications table for MCHOSE K7 V2 Pro+ and K7 V2 Ultra+ mice.

Detailed Product Specifications

5. Setup

5.1 Wired Connection

  1. Plug the standard USB cable into your computer's USB port.
  2. Connect the Type-C end of the cable into the mouse's corresponding port.
  3. The mouse will automatically switch to wired mode and begin charging.

5.2 2.4G Wireless Connection

  1. Switch the power button on the mouse to the [2.4G] position.
  2. Plug the standard USB cable into your computer's USB port and the Type-C end into the magnetic wireless charging dock.
  3. Manual Pairing (if not pre-paired):
    • Press and hold the mouse's Left, Middle, and Right buttons simultaneously for about 5 seconds until the green indicator flashes rapidly to enter pairing mode.
    • Insert the standard USB cable's Type-C end into the magnetic wireless charging dock connected to the computer.
    • Bring the mouse within 20cm of the dock. The indicator light will turn off once pairing is successful.
  4. When both the 2.4G and 8K receivers are connected to the computer, the mouse will pair with the one that was plugged in first.

5.3 Bluetooth Wireless Connection

  1. Switch the power button on the mouse to the [B] position.
  2. On your computer or device, search for Bluetooth devices and select the pairing name "MCHOSE K7 Ultra".
  3. Click to connect.
  4. If connection fails: Press and hold the Left + Middle + Right buttons for about 3 seconds until the indicator flashes rapidly to enter pairing mode again.
  5. When the connection is successful, the indicator light will turn off.

5.4 Magnetic Wireless Charging Dock Charging

  1. Plug the standard USB cable into your computer's USB port, and the Type-C end into the magnetic wireless charging dock.
  2. Place the mouse properly on the magnetic wireless charging dock. The indicator light will stay solid red to indicate charging.
  3. Once fully charged, the indicator light will stay solid green.
  4. When both wired and wireless charging are connected, wired charging takes priority.

6. Operation

6.1 DPI Adjustment

The mouse features multiple DPI levels indicated by different LED colors:

  • Level 1: Red Light - 400DPI
  • Level 2: Blue Light - 800DPI
  • Level 3: Green Light - 1600DPI
  • Level 4: Yellow Light - 3200DPI
  • Level 5: Cyan Light - 6400DPI
  • Level 6: Purple Light - 42000DPI

6.2 Battery Status Indicator

  • Indicator flashing red: Please charge in time.
  • Indicator solid red: Charging.
  • Indicator solid green: Fully charged.
Close-up of the mouse showing electroplated side keys and a side battery indicator.

Side Battery Indicator and Electroplated Keys

6.3 Driver Installation

To customize your mouse settings and unlock its full potential, install the M HUB driver:

Web Driver:

  • Visit: https://www.mchose.store/pages/firmware-2
  • Open the URL in a browser.
  • Click on [Open M HUB WEB] > [Initialize Device].
  • Allow Browser Access, and then select the corresponding product model to connect.

Desktop App Driver:

  • Visit: https://www.mchose.store/pages/firmware-2
  • Open the URL in a browser.
  • Click on "Download M HUB Driver" and then download and install it.
  • Note: The MHUB desktop app driver currently supports only Windows 10 and above; Windows 7 and macOS are not supported at this time.
Screenshot of the M HUB software interface on a monitor, showing connected MCHOSE peripherals including the K7 V2 Ultra+ mouse.

M HUB Software Interface

6.4 Super Competitive Mode

The Super Competitive Mode features an engine speed of 20000fps, enhancing performance during intense gaming sessions.

7. Maintenance

7.1 Charging Instructions

  1. It is recommended to charge the mouse only via the computer's USB port.
  2. Do not use low-quality, non-standard power adapters to charge the mouse.
  3. Do not use over-voltage or over-current power adapters to charge the mouse.
  4. Keep the mouse away from high-temperature devices during charging.
  5. Turn off the power switch when the mouse is not in use for an extended period.

Note: The above charging instructions also apply to other rechargeable devices (keyboard, mouse, headset, speakers, etc.).

7.2 General Care

  • Clean the mouse regularly with a soft, dry cloth.
  • Avoid exposing the mouse to extreme temperatures, humidity, or direct sunlight.
  • Do not disassemble the mouse, as this may void the warranty.

8. Troubleshooting

8.1 Mouse Not Responding / Connection Issues

  • Ensure the mouse is sufficiently charged. Check the battery status indicator.
  • Verify the connection mode switch (Wired, 2.4G, Bluetooth) is set correctly.
  • For 2.4G wireless, ensure the receiver is properly plugged into a USB port and try manual pairing if necessary (refer to Section 5.2).
  • For Bluetooth, ensure Bluetooth is enabled on your device and try re-pairing (refer to Section 5.3).
  • If using wired mode, ensure the USB cable is securely connected to both the mouse and the computer.
  • Try connecting the mouse to a different USB port on your computer.
  • Restart your computer.

8.2 DPI Not Changing

  • Ensure the mouse is powered on and connected.
  • Press the DPI adjustment button (if available) to cycle through DPI levels. Observe the indicator light color.
  • Install or update the M HUB driver software to customize DPI settings (refer to Section 6.3).

8.3 FCC Notice

This device has been tested and complies with the limits for Class B digital devices under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This device generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device does cause harmful interference to radio or television reception (which can be determined by turning the device on and off), we encourage the user to try one or more of the following measures to correct the interference:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the device and receiver.
  • Connect the device to a different circuit from the one to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

9. User Tips

  • The included magnetic wireless charging base is highly convenient for keeping the mouse charged and ready for use.
  • Experiment with different DPI settings and the M HUB software to find the optimal configuration for your gaming style.
  • Regularly clean the mouse's sensor and glide feet for consistent tracking performance.

10. Warranty and Support

For warranty information, technical support, and further assistance, please refer to the warranty card included in your package or visit the official MCHOSE website. Keep your proof of purchase for any warranty claims.

Official MCHOSE Website: https://www.mchose.store

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.