1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your EXFO MAX-710B-M1-E1 MAXTESTER Fiber Optical Time Domain Reflectometer (OTDR). The MAXTESTER is a robust and portable device designed for comprehensive testing and characterization of fiber optic networks, offering precise measurements at 1310nm and 1550nm wavelengths.
2. Product Overview
The EXFO MAX-710B-M1-E1 is a compact, tablet-inspired OTDR optimized for singlemode fiber testing. It features a large touchscreen display and intuitive interface for ease of use in the field. Its primary function is to detect, locate, and characterize events along a fiber optic link, such as splices, connectors, and breaks.
2.1 Device Components
- Touchscreen Display: For viewing test results and navigating the user interface.
- Control Buttons: Minimal physical buttons for essential functions.
- Optical Port: For connecting to the fiber under test.
- USB Ports: For data transfer and connecting peripherals.
- Power Input: For charging and external power supply.
- Battery Compartment: Houses the rechargeable battery.
2.2 Visual Reference
Figure 1: Front view of the EXFO MAXTESTER OTDR, showing the main display and navigation buttons.
Figure 2: Back view of the EXFO MAXTESTER OTDR, displaying the product label with model and serial numbers.
Figure 3: Side view of the EXFO MAXTESTER OTDR, illustrating the various connectivity ports including USB and power input.
3. Setup
3.1 Initial Power-Up and Charging
- Before first use, ensure the device is fully charged. Connect the provided power adapter to the power input port on the device and plug it into a suitable power outlet.
- The charging indicator (if present) will illuminate. Allow several hours for a full charge.
- Press and hold the power button to turn on the device.
3.2 Connecting to Fiber
- Ensure the fiber optic connector on the device is clean. Use appropriate fiber cleaning tools.
- Carefully connect the fiber optic cable to be tested to the optical port on the MAXTESTER. Ensure a secure connection.
- If using a launch cable, connect it between the MAXTESTER and the fiber under test.
4. Operating Instructions
The EXFO MAXTESTER OTDR is designed for intuitive operation. Specific menu navigation may vary slightly based on firmware version, but the general workflow remains consistent.
4.1 Basic OTDR Measurement
- Select Test Mode: From the main menu, select the OTDR application.
- Configure Test Parameters:
- Wavelength: Select 1310nm or 1550nm, matching the fiber type and application.
- Pulse Width: Adjust for desired dynamic range (longer pulse) or resolution (shorter pulse).
- Range: Set the measurement range to cover the entire length of the fiber under test.
- Acquisition Mode: Choose between real-time, average, or auto mode.
- Start Measurement: Press the 'Start' or 'Measure' button on the screen. The OTDR will begin acquiring data and display the trace.
- Analyze Trace: Review the displayed trace for events (connectors, splices, breaks). The device typically provides an event table summarizing detected events, their locations, and losses.
- Save Results: Save the measurement data to the device's internal memory or an external USB drive.
4.2 Data Transfer
To transfer saved test results:
- Connect the MAXTESTER to a computer using a USB cable, or insert a USB flash drive into the device.
- Navigate to the 'File Management' or 'Data Transfer' section in the device's menu.
- Select the desired files and initiate the transfer process.
5. Maintenance
5.1 Cleaning
- Optical Connectors: Always clean optical connectors before each use to prevent contamination and ensure accurate measurements. Use lint-free wipes and appropriate fiber optic cleaning solutions or tools.
- Device Exterior: Wipe the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Touchscreen: Use a soft, clean, lint-free cloth to clean the touchscreen. Avoid excessive pressure.
5.2 Storage
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- Keep all port covers closed to prevent dust and debris from entering.
5.3 Calibration
Regular calibration by authorized service centers is recommended to ensure the continued accuracy and performance of your OTDR.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low or depleted battery; power button not pressed correctly. | Charge the battery; ensure power button is held for sufficient duration. |
| No OTDR trace or poor signal. | Dirty optical connector; incorrect test parameters; damaged fiber. | Clean optical connectors; verify wavelength, pulse width, and range settings; inspect fiber for damage. |
| Inaccurate measurement results. | Dirty connectors; improper launch conditions; device out of calibration. | Clean connectors; use a proper launch cable; consider professional calibration. |
| Cannot transfer data. | Incorrect USB connection; software issue; full storage. | Check USB cable and port; restart device; ensure sufficient storage space. |
7. Specifications
The EXFO MAX-710B-M1-E1 is designed for electrical DIY supplies and originates from Mainland China.
- Model Number: MAX-710B-M1-E1
- Brand: EXFO
- DIY Supplies: Electrical
- Origin: Mainland China
- Wavelengths: 1310nm, 1550nm (as indicated by model name)
7.1 Physical Characteristics
- Package Length: 30 cm
- Package Width: 40 cm
- Package Height: 50 cm
- Package Weight: 3.0 kg
7.2 Additional Specifications
Figure 4: Detailed specifications table for the EXFO MAXTESTER.
Note: For detailed performance specifications (e.g., dynamic range, event dead zone, attenuation dead zone), please refer to the official EXFO product datasheet or the embedded image above.
8. User Tips
- Cleanliness is Key: Always ensure all fiber connectors are meticulously clean before connecting to the OTDR. Contaminated connectors are the leading cause of inaccurate readings and potential damage to the device's optical port.
- Use Launch Cables: For accurate measurements of the first connector and to protect the OTDR's port, always use a launch fiber (also known as a pulse suppressor or dead zone box) of appropriate length.
- Proper Settings: Adjust pulse width and range according to the length and characteristics of the fiber being tested. A shorter pulse width provides better resolution for closely spaced events, while a longer pulse width offers a greater dynamic range for longer fibers.
- Save and Document: Regularly save your test results and document them thoroughly, including fiber identification, test parameters, and any observed anomalies.
9. Warranty and Support
All instruments are fully tested and calibrated before shipment, guaranteed 100% working condition and covered by DOA (Dead On Arrival) warranty. Any defective goods must be reported and returned to us within the valid warranty period, and please keep the original packaging intact as much as possible.
Damage caused by improper installation, unauthorized modification, or man-made misuse is not covered by warranty. Any artificial physical damage will automatically void the warranty qualification.
All products will be inspected on appearance, function, and indicators before shipment, with professional warranty label attached. Return is not acceptable if the warranty label is torn or damaged.
For support inquiries, please contact HKWL Instruments Store. We are committed to providing sincere and professional after-sales support.
Contact Information:
- E-mail: HKWL2026@yeah.net
- WhatsApp: +86 17372037609
- WeChat: ljjyy0923