1. Introduction
Thank you for choosing the ULTIMEA Poseidon M70 Dolby Atmos Soundbar. This manual provides essential information for setting up, operating, and maintaining your new home theater speaker system. Please read it thoroughly before use and keep it for future reference.
1.1. What's in the Box

Figure 1.1: Package Contents
- Soundbar (1x)
- Wireless Subwoofer (1x)
- Power Adapter (1x)
- Power Cables (2x)
- HDMI Cable (1x)
- Remote Control (1x)
- Wall Mount Screws (4x)
- Wall Anchors (2x)
- Wall Mount Brackets (2x)
2. Important Safety Instructions
Please read and retain this manual. Follow all warnings and operate according to the instructions.
- Do not use the device near water sources, in damp environments, or in the rain. Avoid splashing liquids or placing objects containing liquids (such as vases) on the device.
- Clean only with a dry cloth. Do not use liquid cleaners.
- Do not block ventilation openings or install the device in an enclosed space. Ensure proper ventilation and install according to the manufacturer's instructions.
- Do not install the device near heat sources such as radiators, stoves, or amplifiers. Do not cover the ventilation openings with items such as newspapers or curtains.
- Use only attachments, stands, or accessories specified by the manufacturer. When using a device with wheels, move with care to avoid tipping.
- Protect the power cord from being pinched, stepped on, or bent, especially at plugs, outlets, and the point where it exits the device.
- Do not alter the polarized or grounding-type plug. If the plug does not fit into the outlet, consult an electrician to replace the outlet.
- Unplug the device during lightning storms or when unused for long periods. To fully disconnect power, unplug the device from the wall outlet and ensure the plug is accessible.
- Do not place any open flame sources (such as lit candles) on or near the device.
- Do not attempt to open the device. High voltage inside may be fatal. There are no user-serviceable parts inside. All servicing must be performed by qualified personnel.
- The installation height of the device must not exceed 2 meters.

Scan for safety information in other languages.
California Proposition 65 Warning:
This product can expose you to BPA, a carcinogen, and BPA, a reproductive toxicant. For more information, go to www.P65Warnings.ca.gov.
3. Setup
3.1. Soundbar Assembly
The Poseidon M70 soundbar features a dual-unit design. To assemble, align the seams of the two parts and rotate to connect them. Ensure the soundbar is NOT powered on during assembly.

Figure 3.1: Soundbar Dual-Unit Assembly
3.2. Placement
Place the soundbar below your TV, ensuring it has a clear path for the up-firing drivers. The wireless subwoofer can be placed anywhere in the room for optimal bass, as it does not require a direct cable connection to the soundbar.

Figure 3.2: Typical Soundbar and Subwoofer Placement
3.3. Wall Mounting
The soundbar can be wall-mounted. Use the provided screws and anchors. The mounting points on the soundbar are spaced 41mm (1.61 inches) apart, with a total width of 429.5mm (16.91 inches) between the outermost points. The bracket screws have a diameter of 8.8mm (0.3 inches).

Figure 3.3: Wall Mounting Diagram
3.4. Power Connection
Connect the power adapter to the soundbar's DC IN port and plug it into a power outlet. Connect the subwoofer's AC power cable to its AC IN port and then to a power outlet.

Figure 3.4: Power Connections
3.5. Audio Connections
The Poseidon M70 offers multiple connectivity options:

Figure 3.5: Rear Panel Connections
- HDMI eARC: For the best audio quality and one-remote convenience, connect an HDMI cable from the soundbar's "HDMI to TV (eARC)" port to your TV's HDMI eARC/ARC port.
- Optical: Connect an optical cable from the soundbar's "OPTICAL" port to your TV's Digital Audio Out (Optical) port.
- USB: Insert a USB drive into the USB port for media playback.
- Bluetooth: For wireless audio streaming from compatible devices.
3.6. Subwoofer Pairing
The soundbar and wireless subwoofer are typically pre-paired at the factory. If they become disconnected, follow these steps to re-pair them:
- Ensure both the soundbar and subwoofer are powered on.
- On the soundbar's remote control, press and hold the "SUB" button for 5 seconds. The subwoofer indicator light will begin to flash.
- On the wireless subwoofer, press and hold the "ON/OFF" button for 5 seconds.
- The subwoofer indicator light will turn solid when successfully paired.

Figure 3.6: Subwoofer Pairing Process
4. Operation
4.1. Remote Control
The soundbar is controlled using the included remote. It requires 2 x AAA batteries (not included).

Figure 4.1: Remote Control Layout
- Power Button: Turns the soundbar on or off.
- Mute Button: Mutes or unmutes the sound.
- Volume +/-: Adjusts the main volume level.
- Source Button: Cycles through input sources (HDMI, Optical, Bluetooth, USB).
- EQ Mode: Selects between various sound modes (Movie, Music, Voice, Sport, Game, Night).
- BASS +/-: Adjusts the subwoofer bass level.
- Up-Firing Level +/-: Adjusts the volume of the up-firing speakers.
- Dimmer: Adjusts the brightness of the soundbar's LED display.
4.2. Bluetooth Connection
To connect a Bluetooth device:
- Press the Source button on the remote or soundbar until "BT" is displayed.
- On your mobile device, search for "Poseidon M70" in the Bluetooth settings and connect.
- To disconnect, short press the Bluetooth channel button on the remote, then hold for 5 seconds.

Figure 4.2: Bluetooth 6.0 Connectivity
4.3. Smart App Control
Download the ULTIMEA App on your Android™ or iOS device for advanced control and customization.

Figure 4.3: ULTIMEA App Interface
The app allows you to:
- Fine-tune your audio using a professional 10-band equalizer.
- Explore 121 expertly tuned EQ presets.
- Optimize sound for various content like movies, music, and gaming.
- Receive OTA firmware updates to continuously improve performance and unlock new features.
4.4. Resetting the Soundbar
To reset the soundbar to its factory settings, press and hold the MUTE button on the remote control for 5 seconds.
5. Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Poseidon M70 soundbar system, follow these simple maintenance guidelines:
- Cleaning: Always unplug the soundbar and subwoofer from the power outlet before cleaning. Use a soft, dry cloth to wipe down the surfaces. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish.
- Ventilation: Ensure that the ventilation openings on both the soundbar and subwoofer are not blocked by dust or debris. Regularly check and gently clean any accumulated dust.
- Storage: If storing the unit for an extended period, unplug it from power, clean it, and store it in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your Poseidon M70 soundbar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable not connected; Power outlet not active | Ensure power cables are securely connected to both the soundbar and subwoofer, and to a working power outlet. |
| No Sound | Incorrect input source; Volume too low; Cables not connected properly | Select the correct input source (HDMI, Optical, BT, USB). Increase the volume on both the soundbar and your TV. Check all audio cables for secure connections. |
| Subwoofer Not Pairing | Subwoofer disconnected from soundbar | Follow the subwoofer pairing steps in Section 3.6. |
| Poor Sound Quality | Incorrect EQ mode; Room acoustics; Source audio quality | Try different EQ modes (Movie, Music, etc.). Adjust Bass and Up-Firing levels. Ensure the source audio quality is good. |
| Remote Control Not Working | Dead batteries; Obstruction; Out of range | Replace batteries (2 x AAA). Ensure there is no obstruction between the remote and the soundbar. Point the remote directly at the soundbar. |
| Bluetooth Connection Issues | Device too far; Interference; Not in pairing mode | Ensure your device is within 10m/33ft of the soundbar. Disconnect and re-pair the Bluetooth device. Avoid other wireless devices that may cause interference. |
| Dialogue Unclear | VoiceMX™ not optimized | Ensure VoiceMX™ is enabled (if applicable via app) or try the 'Voice' EQ mode. Adjust EQ settings via the app for vocal clarity. |
7. Specifications
| Feature | Specification |
|---|---|
| Model | U392D |
| Sound System | 3.1.2 channel |
| Soundbar Power Supply | 18V 3A DC |
| Subwoofer Power Supply | 100-240V~50/60Hz AC |
| Soundbar Drivers | 3 x 2.25" + 2 x 2" |
| Subwoofer Driver | 1 x 5.25" |
| Standby Power | <0.5W |
| USB Output | 5V 500mA DC |
| Operating Temperature | -10°C to 40°C (14°F to 103°F) |
| Operating Altitude | 2000 meters above sea level |
| Remote Control Battery Type | 2 x AAA (NOT INCLUDED) |
| Wall Mount Screw | 4 x 35 mm / 0.2" x 1.4" |
| Bracket Screws Diameter | 8.8 mm / 0.3" |
| Frequency Response | 50Hz - 18kHz (-6dB) |
| Audio Inputs | HDMI, Optical, Bluetooth, USB |
| Soundbar Dimensions (W x H x D) | 600 x 70 x 90 mm (23.6" x 2.8" x 3.5") |
| Subwoofer Dimensions (W x H x D) | 300 x 200 x 150 mm (11.8" x 7.9" x 5.9") |
| Packaging Dimensions (W x H x D) | 335 x 437 x 197 mm (13.2" x 17.2" x 7.8") |
| Packaging Weight | 6.2 kg (13.7 lbs) |
| Wireless Frequency Range | 2.402GHz - 2.48GHz |
| Max. Transmit Power (EU) | 10 dBm |
7.1. Power Consumption and Wireless Connection Setup Guide
- Off: N/A
- Standby (when all wireless connections are deactivated): < 0.5 W
- Networked standby for Soundbar: < 2.0 W
The duration for the device to enter standby mode can be set in the app. Changing this setting may lead to a significant increase in energy consumption, negatively impacting the environment.
The period of time after which the power management function switches the equipment automatically into:
- Standby: Switched to standby mode after 15 minutes when the soundbar is idle (with no playback or operation) and neither Bluetooth nor the app is connected.
- Networked standby: Switched to networked standby mode after 15 minutes of inactivity in operational mode when Bluetooth or the app is connected.
How to activate wireless network connections:
- Set up the equipment properly.
- Switch into wireless mode (Bluetooth).
- Connect with energy using products (e.g., players/game consoles/STB (Set-Top Boxes)/phones/tablets/PCs).
How to deactivate wireless network connections:
- Switch to another channel besides Bluetooth.
- Then long press on the remote control for more than 3 seconds.
8. User Tips
- Explore Sound Modes: Experiment with the different EQ modes (Movie, Music, Voice, Sport, Game, Night) to find the best audio experience for your content. Some users find 'Night mode' particularly useful for specific listening preferences.
- Power Cycling and Settings: If you frequently power off the soundbar system completely (e.g., via a power strip), and find that settings are not retained, ensure you are using the app to save custom EQ settings. Also, check the power management settings within the app to ensure it's configured to your preference.
- App Customization: Utilize the ULTIMEA app's 10-band equalizer and 121 presets to fine-tune your sound. This allows for a personalized audio experience beyond the standard remote control options.
9. Warranty & Support
For technical support, warranty information, or to extend your warranty, please contact ULTIMEA using the information below:
- US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
- Email Support: support@ultimea.com
- Website Support: support.ultimea.com

Download the ULTIMEA App
You can also search for "ULTIMEA" on social media platforms for updates and community support.
A PDF version of this user manual is available for download at https://manuals.plus/m/33216ef88aefe44c3b169cd6bfbb4d4b854463f268a873cb2645f17c2aec8d5f.
10. Proper Disposal Instructions
This mark on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
10.1. Waste Electrical & Electronic Equipment (WEEE)
Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
11. Regulatory Compliance
11.1. Wireless Frequency Range and Wireless Output Power
- Frequency: 2.402GHz-2.48GHz
- Max. transmit power (Applies only to the EU): 10 dBm
11.2. FCC Regulatory Compliance
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
11.3. ISED Warnings
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in issue6 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
11.4. CE Warnings
- Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- WARNING: The adapter plug is used as disconnect device, the disconnect device shall remain readily operable.
- Frequency: 2.402GHz-2.48GHz
- The Max. transmit power: 10 dBm
11.5. EU Declaration of Conformity
Ultimea Technology (Shenzhen) Limited declares under its sole responsibility that the product ULTIMEA Poseidon M70 (Model No.: U392D) is in conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU), the Restriction of Hazardous Substances Directive (2011/65/EU), the Electromagnetic Compatibility Directive (2014/30/EU), and the Low Voltage Directive (2014/35/EU). The product is responsible for affixing the CE marking.
11.6. Trademarks
- Dolby Atmos: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2024 Dolby Laboratories. All rights reserved.
- Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ultimea Technology (Shenzhen) Limited. is under license. Other trademarks and trade names are those of their respective owners.
- HDMI™: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.