JOYING JY-UTD08N12

Contents

JOYING 10.1" Universal Android Car Stereo Instruction Manual

Model: JY-UTD08N12

This manual provides detailed instructions for the installation, operation, and maintenance of your JOYING 10.1" Universal Android Car Stereo. Please read thoroughly before use.

1. Introduction

Thank you for choosing the JOYING 10.1" Universal Android Car Stereo. This advanced head unit offers a comprehensive in-car entertainment and navigation experience, featuring a powerful processor, ample storage, and support for wireless CarPlay and Android Auto. This manual will guide you through setting up and utilizing all the features of your new car stereo.

Package Contents

The package includes the following items:

Diagram showing all components included in the JOYING car stereo package, such as the 10.1 inch head unit, double din cage, brackets, plastic trim, shims, installation manual, universal cable, BT antenna, WiFi antenna, 4G antenna, USB cables, user manual, GPS antenna, external mic, AR cable, and screen ribbon cable.

Image: Package Contents - Includes the 10.1" head unit, double din cage, left & right bracket, plastic trim out, reinforced shims, installation manual, universal cable, BT antenna (x1), WiFi antenna (x2), 4G antenna (x2), USB cable (x2), user manual, GPS antenna (x1), external mic (x1), AR cable (x1), and screen ribbon cable (x1).

  • 10.1" Head Unit
  • Double Din Cage
  • Left & Right Bracket
  • Plastic Trim Out
  • Reinforced Shims
  • Installation Manual
  • Universal Cable
  • BT Antenna (x1)
  • WiFi Antenna (x2)
  • 4G Antenna (x2)
  • USB Cable (x2)
  • User Manual
  • GPS Antenna (x1)
  • External Mic (x1)
  • AR Cable (x1)
  • Screen Ribbon Cable (x1)

2. Safety Precautions

To ensure safe operation and prevent damage, please adhere to the following guidelines:

General Safety

  • When driving, adjust the sound volume to an appropriate level to ensure awareness of the driving situation and safety.
  • Do not watch videos or operate the car radio while driving to avoid violating traffic laws and compromising driving safety.
  • Do not expose the unit to rain to prevent short circuits.
  • Avoid placing or leaving any metal objects (e.g., coins, metal tools) inside the car radio to prevent short circuits.
  • Operate the car radio according to this manual. Do not attempt to open the audio system for repair. If repair is needed, consult a professional repair station or the seller.
  • Do not operate the car stereo for extended periods when the engine is off, as this will drain the vehicle battery.
  • Do not insert objects into ventilation slots or other openings on the car radio.
  • Avoid touching, rubbing, or striking the screen with sharp objects.

Maintenance Precautions

  • The screen must not be exposed to moisture, dust, steam, or oily smoke.
  • Avoid prolonged exposure of the screen to direct sunlight.
  • Protect the stereo from heavy pressure and impact.
  • Do not connect other power sources to the car radio, as this may burn internal components.
  • If the screen is stained, clean it with a soft and clean cloth.

3. Specifications

FeatureSpecification
Brand NameJOYING
ModelJY-UTD08N12
Operating SystemAndroid 13
Processor TypeQCM6490 (8-Core Customized version 6nm process)
GPUQualcomm® AdrenoTM 643 @814 MHz
RAM12GB
ROM256GB
Display Size10.1 inch
Resolution1280*800 (IPS Full HD)
Touch ScreenYes
Din TypeDouble Din
Out Power50W*4
Voltage12 V
Item Weight4.5kg
Item Size10.1inch
InterfaceUSB+RCA
Max External Memory256G
TF/Micro SD Slot1
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageMulti-language support including English, Chinese, Arabic, German, Russian, French, Korean, Dutch, Portuguese, Spanish, Italian, etc.
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support steering wheel control, Support Can-Bus, MP3 players, DSP, CarPlay, Android Auto, Split Screen, Remote Controller Included
Audio OutputOptical + Coaxial + Subwoofer + Center Channel + 4RCA-Channel Output
HDMIHDMI Input/HDMI Output
CP/AASupport wired + wireless CarPlay / Android Auto
Power DSP AmplifierTDA7850
Radio TunerNXP TEF6686
Working Temperature-20℃ to 70℃

Motherboard Feature Overview

Diagram showing the motherboard components and their specifications, including ARM QCM6490 CPU, Adreno 643 GPU, TDA7850 Amplifier, Image Processor TP2815, LT 8711H Output, LT 6911C Input, Radio Tuner NXP TEF6686, Dual Bluetooth, AKM 7739 DSP, and AKM 4432 DAC.

Image: Motherboard Feature Overview - Details the CPU (ARM QCM6490, 8-core, 2.7 GHz), GPU (Adreno 643 @814 MHz), Audio Output (4-channel, 5532 Op-Amp), TDA7850 Amplifier, Image Processor TP2815, LT 8711H Output (Type-C with DP 1.2, HDMI 2.0s & 1.4, Max 4K@30Hz & 1080p@60Hz), LT 6911C Input, Radio Tuner NXP TEF6686, Dual Bluetooth, Audio DSP AKM 7739, and Audio DAC AKM 4432.

4. Setup and Installation

Screen Position Adjustment Instructions

The screen position can be adjusted vertically and in depth to fit various car center consoles.

Vertical Adjustment

The screen can be moved up or down with a maximum movement distance of about 24mm and a minimum movement distance of about 8mm.

Diagram showing the car stereo screen in a car dashboard, with measurements indicating a 24mm maximum upward movement and 8mm minimum downward movement.

Image: Screen Position Adjustment - Illustrates the vertical movement range of the screen (24mm up, 8mm down).

When the screen is moved up, remove the 4 clips behind the screen and adjust the distance to avoid covering the air conditioning buttons or vents. Move the clips to the right position.

Diagram showing the rear of the car stereo screen with clips for adjustment, and how to position them for 'screen up', 'in the center', and 'screen down' positions.

Image: Screen Position Adjustment Clips - Shows how to adjust clips for screen up, center, and down positions.

Screen Depth Adjustment Instructions

The screen depth can be adjusted by modifying the screw holes of the components. The minimum adjustment range is 0mm (flush with panel) and the maximum adjustment range is 10mm.

Three diagrams illustrating screen depth adjustment: 0mm (screen fits tightly to panel), 5mm (screen distance to panel 5mm), and 10mm (screen distance to panel 10mm).

Image: Screen Depth Adjustment - Demonstrates 0mm, 5mm, and 10mm depth settings.

5. Operating Instructions

Basic Operation - Gesture Recognition

The car radio recognizes various gestures:

  • Click: Single tap.
  • Drag: Press and slide.
  • Press: Long press.
  • Refers to more lines: Swipe up/down to scroll.
  • Swiping up and down: Scroll vertically.
  • Swipe left: Swipe horizontally.

The notification bar can be accessed by swiping your finger down from the status bar.

Main Interface

The home page is displayed by pressing the home button on the status bar. Key functions include:

  • Home Button: Enter the home page.
  • Back Button: Return to the previous layer.
  • Volume Display: Adjust volume.
  • Close Application: Close the current application.
  • All Applications: View all installed applications.
  • Settings: Enter system settings.
  • Small Window Application: Set a small window application.

To change a small window application, click the small window settings button and select the desired application.

To customize desktop widgets, click the edit button in the upper right corner of the desktop widget and select the widget you want to replace.

To set a shortcut, long press an APP icon at the bottom of the home page and choose a commonly used APP from the pop-up.

Bluetooth

The unit supports dual Bluetooth for simultaneous connections to two smartphones or a combined link between a phone and an OBD diagnostic dongle.

Video: Demonstrates dual Bluetooth connectivity, allowing two phones to be paired simultaneously for calls and music.

Bluetooth Dial

Functions include Dial pad, Call history, Phone book, Answer/dial, Hang up, Backspace, Refresh phonebook, and Microphone mute. Radio and phone calls are interchangeable.

Bluetooth Settings

  1. Click the Bluetooth APP to enter the Bluetooth setting interface.
  2. Click [Bluetooth switch] to turn on or off Bluetooth.
  3. Click [Device name] to change the Bluetooth name.
  4. Click [Pin] to change the pairing password.
  5. Click [Auto pick set] to turn on or off auto answer.
  6. Click [WeChat voice switch] to turn on or off the message prompt tone.
  7. Click [Search Devices] to find the Bluetooth device to be connected.

Bluetooth Music Playback

After the mobile phone is connected to the car radio via Bluetooth, click the Bluetooth music APP to enter the player page. Functions include:

  • Enter the mixer page
  • Last song
  • Pause/play
  • Next track

Music Player

Click the [Music] APP to enter the player page. Functions include:

  • Player page
  • Display the music list
  • Enter the mixer page
  • Last song
  • Pause/play
  • Next song
  • Loop playback / single loop / random playback
  • Click to favorite songs

Video Player

Functions include:

  • Picture-in-picture function
  • Loop playback / single loop / random playback
  • Last video
  • Pause / play
  • Next video
  • Favorite shows
  • File List

Radio

The unit features an NXP TEF6686 radio tuner for FM/AM/RDS support.

FM Function

Drag left and right in the frequency area to quickly find desired frequencies.

  • FM radio
  • Stereo/mono switch
  • Station name info can be easily edited.
  • Adjust station forward slightly (long press to halve frequency for auto-search).
  • Last station
  • Play and pause
  • LOC: Remote reception of broadcasts with long transmission distances, while short-range listening to local strong channels.

AM Function

  • AM radio
  • Auto-search for radio channels
  • Adjust station backwards slightly (long press to add frequency for semi-automatic search).
  • Open the favorite station list
  • Next station
  • Select Favorite as your favorite radio station.

Radio Settings

  1. Radio zone setting: Set according to your country/region for proper reception.
  2. Radio antenna switch: When turned on, supplies +12V voltage to antenna outputs.
  3. Radio RDS: When turned on, can receive information from local radio stations.
  4. Radio auto turns on power: Voltage supplied to antenna after entering radio function, turned off after exiting.
  5. Radio antenna socket power: For cars that supply power to the antenna through the antenna socket, turn on this switch.

Sound Effects

The unit features a 4-channel, 5532 Op-Amp & TDA7850 Amplifier for DTS Sound Enjoyment, along with AKM 7739 DSP and AKM 4432 DAC for high-fidelity audio.

Image showing a car interior with blue glowing circles indicating sound emanating from four speakers, illustrating DTS Sound Enjoyment.

Image: DTS Sound Enjoyment - Visual representation of 4-channel audio output.

Diagram detailing Velvet Sound AKM 7739 DSP and High-Fidelity Sound AKM 4432 DAC, showing 24-bit ADC & 32-bit DAC, 192kHz PCM Input, 32-bit Processing & Low-Distortion, 4* Audio Outputs, Fiber Optical Output, SPDIF Coaxial Output, and High-resolution audio.

Image: Audio Processing Details - Highlights AKM 7739 DSP and AKM 4432 DAC capabilities.

HiFi Settings

  1. Click the [Sound effects] APP to enter the sound effect setting interface.
  2. Click the speaker icon to select speaker channel (2ch, 2.1ch, 4ch, 4.1ch, 5.1ch).
  3. Click [DTS] to enable or disable the DTS sound effect.

EQ Selection

  1. Click the EQ icon to enter the EQ setting.
  2. Click "System Sound" to enter the system sound effects. There are 20 preset sound effects.
  3. Tap "Simple Mode" or "Complex Mode" to enter the equalizer settings.

EQ Setting

  • The 48-band equalizer can be adjusted.
  • Q value gain can be adjusted (High/Medium/Low).
  • Equipped with 3 groups of user memory equalizer adjustments.
  • "Simple mode" can set the sound effects of the front and rear speakers separately.
  • "Complex Mode" can set the sound effect of each speaker independently.
  • Click the reset icon to restore the default value.

Sound Field Settings

  1. Click the sound field icon to enter the sound field settings.
  2. In this interface, you can choose the standard, main driving mode, co-driver mode, and full car mode.
  3. Users can also adjust the desired sound field themselves.
  4. Click the reset icon to restore the default value.

DTS Scenes

  1. Click to enter the DTS scene mode interface.
  2. Enter "Scene Mode", preset 5 DTS scenes for users to choose.
  3. Enter "Virtual Center" to set the center audio output on or off (DTS must be off when the center is on).
  4. Enter "Surround Mode", the 5.1 speakers installed in the car can adjust the surround effect.
  5. Enter "Bass Boost", you can adjust the output of different low frequencies of the front and rear speakers. The output of different low frequencies of the subwoofer can be adjusted.
  6. Enter "Sound Field Focus", you can adjust the sound pitch of the front, middle and rear speakers to enhance the sound field focus.
  7. Enter "Subwoofer" to adjust the output of the subwoofer. When the "Phase" switch is turned on, the output audio is inverted.

Professional Settings

  1. Click to enter the DSP professional mode interface.
  2. Enter "Delay Function", you can set the delay effect for speakers in different positions.
  3. Enter "Gain Adjustment" to increase the volume of the speakers in different positions.
  4. Enter "X-over", the frequency division function can be achieved for the front, middle and rear speakers.

CarPlay & Android Auto

The unit supports both wireless and wired CarPlay and Android Auto.

Image showing the car stereo screen displaying both Wireless CarPlay and Wireless Android Auto interfaces side-by-side, with a smartphone connected via Bluetooth.

Image: Dual-mode Bluetooth, Wireless CarPlay/Android Auto - Shows simultaneous operation of CarPlay and Android Auto.

Wireless Connection (iPhone & Android)

  1. Connect your mobile phone to the car radio via Bluetooth successfully.
  2. Open the "Z Link" app. Click the appropriate icon for iPhones (CARPLAY) or Android phones (ANDROID AUTO).
  3. For iPhone: Click "Use CarPlay" in the prompt on your phone or open "Use CarPlay" in Bluetooth settings.
  4. For Android phones: Click confirm in the prompt on your phone.

Wired Connection (iPhone & Android)

  1. Connect your phone to the USB OTG port of the car radio via the original data cable.
  2. Open the "Z Link" app. Click the connection method icon and choose CarPlay/Android Auto/HUAWEI HiCar/MIRROR.
  3. For iPhone: Allow CarPlay Link_*** to use CarPlay when the phone is locked.
  4. For Android phones: Click confirm in the prompt on your phone.

MIRROR Wireless Screen Connection

  1. Connect your phone and machine to the same WiFi network, or connect the machine to the mobile hotspot.
  2. Click the interface icon, select "MIRROR" to enter the wireless screen projection interface.
  3. Open the mobile phone control center, select Screen Mirroring and then select the car device name to start screen mirroring.

CarPlay Play Video (iOS 18+)

  1. Use an iPhone with iOS 18 or above to connect to wireless CarPlay.
  2. Click Kolos to enter the video playback interface.
  3. Download the Kolos app on your mobile phone.
  4. Turn on phone mirroring and connect to a device starting with "zLink-***".
  5. Open the app and click [video stream].
  6. Screen projection is successful.
  7. Select the video to play on your mobile phone.

Cooling System

The unit features advanced engineering with high-efficiency cooling to maintain optimal performance.

Image showing the internal components of the car stereo with a cooling fan and heat sinks, highlighting advanced engineering for high-efficiency cooling.

Image: Advanced Engineering High-Efficiency Cooling - Internal view of the cooling system.

The cooling system can be controlled via the 'Chassis Fan Control' settings, allowing for manual or automatic temperature management.

6. Customization

Wallpaper Setting

  1. System wallpapers are divided into "light color" (day mode) and "dark color" (night mode).
  2. Select a wallpaper to change the screen background image.
  3. If "light color" or "dark" is chosen in "Theme set", only the corresponding wallpaper type can be selected.
  4. Set the picture resolution on your computer to match the car radio's screen resolution. Save day mode pictures (light color tone) and night mode pictures (dark color tone). For rotatable car radios, save two additional pictures with vertical screen resolution. Use JPEG or PNG format.

Importing Custom Wallpapers

  1. Create a folder named "wallpapers" in the root directory of a USB disk.
  2. Inside "wallpapers", create "day" and "night" folders.
  3. Depending on your car radio's resolution, create subfolders (e.g., "1920x1080") within "day" and "night" for horizontal wallpapers. For rotatable radios, also create "1080x1920" folders for vertical wallpapers.
  4. Copy day mode pictures to the appropriate "day" folder and night mode pictures to the appropriate "night" folder.
  5. Insert the USB flash drive into the machine's USB port. Open the "Wallpaper" APP, click "import", then the search button behind "Start position", and finally "Start copying" to complete the import.

Colorful Lights Setting

  1. Button light control can be set to "normally off", "always on", or "auto".
  2. Supports colorful lights after being turned on.
  3. In "Manual" mode, choose one of seven colors or adjust RGB values.
  4. In "Auto" mode, the button light will change color automatically.
  5. Adjust "Magic Mode Speed" to change the timing of colorful light changes.

System Settings

  1. Screen brightness: Adjust day and night mode brightness separately.
  2. Theme set: Choose "Light", "Dark", "Time Control", or "small light control".
  3. Theme: Select UI1 or UI2.
  4. Language and input method: Change system language.
  5. Date and time: Auto sync with network/GPS or manual setting.
  6. Time format: Set to 12 or 24 hours.
  7. System recovery: Restore to factory settings.

Car Logo Setting

To set a custom boot-up logo:

  1. Prepare a logo picture (e.g., 1280*800, 1920*1080) named "Logo.BMP".
  2. Create a folder named "Medialogos" on an empty USB disk and place "logo.bmp" inside.
  3. Insert the USB disk into the car radio. Go to Settings > System > Factory (password: 8888) > Set boot logo to view the logo picture.
  4. Alternatively, install the "LogoSet.apk" from the file manager and set the preset logo from the LogoSet app.

7. Troubleshooting (FAQ)

Common Problems

  • Head Unit doesn't turn on/Black Screen:
    • After installation, if the display is black on first boot, press the reset button.
    • If black screen occurs after some time, check for sound (touch screen prompt, music playback) and check for a red flashing light on the core board.
  • Poor FM Radio Reception:
    • Check if the OEM Car radio antenna needs power and connect the ANT-CONT Cable.
    • In Factory Settings, switch on "Antenna Always on".
  • No Sound or Some Speakers without Sound:
    • For cars with OEM Amplifier: Connect the AMP-CONT Cable and turn on "AMP ON/OFF" in Sound Setting.
    • For cars without OEM Amplifier: Check speaker cable connections.
  • Reversing Camera does not work:
    • If head unit switches to reverse mode but no signal: Check trigger wire and power supply cable. Test camera by connecting to "Video In" port and opening AUX APP.
    • If head unit cannot switch to reverse mode: Check Back Cable connection. For Canbus cars, if removing Back Cable and connecting to Red ACC Cable allows reverse mode, the Canbus adapter is defective.
  • GPS Not working/without signal:
    • Check if the GPS antenna is connected correctly and placed in a correct position (receiver side facing sky, no metal shielding).
  • Bluetooth connection not working:
    • Radio supports Bluetooth with Phone and OBD2 only.
    • Switch off/on Bluetooth on both phone and head unit, then search again.
    • Pay attention to pairing request pop-ups on your phone and click "Yes".
  • During Bluetooth phone call, others cannot hear clearly:
    • If using external microphone, check connection. Record voice to test microphone functionality.
  • During Bluetooth phone call, users hear others' lower voice or others hear user's lower voice:
    • Adjust head unit's main volume.
    • Adjust Microphone volume in sound settings.
  • Bluetooth Music playing without sound:
    • Check phone's volume and Bluetooth audio permissions.
  • Cannot display contacts or only display part of contacts:
    • Check "Sync contacts" option in phone's Bluetooth settings.
    • Contacts info must be saved in phone, not SIM Card, to sync.
  • Bluetooth name change failed: Turn off/on Bluetooth, then search device again.
  • Music files not updated in Music player app after inserting SD Card/USB:
    • Go to music app to detect and scan. For large data, it may take time.
    • Ensure SD Card/USB is inserted correctly and files are visible in Filemanager app.
  • No sound or sound is lower: Adjust volume in Volume Balance settings to middle level.
  • USB not recognized or USB reading abnormal: Try different brands/storage USB disks. Format USB disk after backing up if reading is abnormal.
  • Unable to connect to CarPlay:
    • Wired CarPlay: Use OEM USB Cable to connect phone to radio OTG USB port. For third-party cables, click "Trust" on phone.
    • Wireless CarPlay: Restart phone and try again.
  • Unable to connect to Android Auto:
    • Wired Android Auto: Use OEM USB Cable to connect phone to radio OTG USB port. For Samsung phones, use OEB USB Cable.
    • Wireless Android Auto: Restart phone and try again.
  • WiFi cannot connect automatically to phone's hotspot after Head Unit boots up: If using iPhone, enter "Personal hotspot" page on your phone.
  • Touch Screen cannot work (screen freezes and no reaction): Reset head unit first. Try connecting a USB Mouse; if it works, touch screen is broken; if not, core board is defective.
  • SIM cards cannot be recognized:
    • Insert micro SIM Card correctly.
    • After inserting SIM Card, click reset button to reset radio.

8. User Tips

  • Vehicle Compatibility: Always verify the physical dimensions and wiring harness compatibility with your specific vehicle model (e.g., XP90 Yaris 2008) before installation.
  • HDMI Connectivity: The unit supports HDMI input and output. For connecting external devices like an Xbox or PlayStation, ensure you have the correct HDMI cables.
  • PDF Manual: A detailed user manual in PDF format is available for download at this link.

9. Warranty and Support

Warranty

This product comes with a 2-year warranty. Please retain your proof of purchase for warranty claims.

Support

For any technical issues or support inquiries, please contact the seller directly. The factory settings should only be adjusted with the support of after-sales personnel, using password "8888". Unauthorized modifications may void the warranty.

Note on 360 Panoramic Camera: The unit supports a 360-degree panoramic camera via a dedicated interface, but the camera itself is not included and must be purchased separately. Activation of the 360-degree view function may require an additional fee for the activation service.

© 2024 JOYING. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.