1. Safety Information & Warnings
Please read all safety information and warnings carefully before using this charger. Failure to follow these instructions may result in electric shock, fire, personal injury, or property damage.
- This charger is ONLY used for Lithium-ion Batteries.
- NEVER charge a non-rechargeable battery or lead-acid battery. Other types of batteries might burst, causing personal injury or other damage.
- NEVER store the charger outdoors; it is for indoor use only.
- NEVER use the charger in inflammable and explosive areas.
- NEVER set the output cable, power cord, and the charger on a wet surface.
- NEVER use the charger as a DC power source for any electrical equipment.
- NEVER attempt to plug in the charger using wet hands or in an extremely humid environment.
- NEVER place the charger directly under the sun, expose to rain, snow, or excessive moisture.
- NEVER operate a charger with a damaged cord or plug. Inspect both input and output cords for any damage before using the charger.
- NEVER disassemble, repair, or modify the charger. Incorrect assembly can result in risk of electric shock or fire.
2. What's in the Box
Carefully unpack the box and ensure all items are present:
- Charger Mainframe
- AC Power Cord (US Plug / EU Plug, depending on selection)
- User Manual (this document)
- Multiple DC Adapter Wires (e.g., 18mm 3PIN XLR, 8mm 3P GX16, RCA, DC 5.5x2.5mm, DC 5.5x2.1mm)
3. Setup & Operation
Follow these steps to safely charge your device:
- Prepare Device: Turn off your electric device (e.g., e-bike, scooter) before connecting the charger.
- Connect AC Power: Plug the AC power cable (female end) into the AC input port of the charger mainframe. Then, plug the charger's AC power plug into a suitable wall power outlet.
- Select DC Connector: Choose the appropriate DC adapter wire that fits your device's charging port. Ensure the connector size and polarity (positive/negative) are correct. Polarity is usually indicated on the back of the charger or your device. If unsure, consult your device's manual or the seller.
- Connect to Device: Plug the selected DC adapter wire into the charging port of your device.
- Monitor Charging: The LED indicator on the charger will show its status:
- Red Light: Indicates the battery is currently charging.
- Green Light: Indicates the battery is fully charged or the charger is disconnected from the battery.
- Disconnect After Charging: Once the device is 100% charged (green light), first unplug the DC charging head from your device, then unplug the charger from the wall power outlet.
4. Maintenance
- Inspection: Regularly inspect the AC power cord, DC output cables, and the charger casing for any signs of damage, fraying, or wear. Do not use if damaged.
- Cleaning: Keep the charger clean and free from dust and debris. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry, indoor environment when not in use. Avoid extreme temperatures and direct sunlight.
- Ventilation: Ensure the charger has adequate ventilation during operation. Do not cover it or place it in an enclosed space.
5. Troubleshooting
If you encounter issues with your charger, try the following steps:
- Charger Not Powering On:
- Ensure the AC power cord is securely plugged into both the charger and the wall outlet.
- Check if the wall outlet is functional by plugging in another device.
- Not Charging (Red LED Not On):
- Verify that the DC connector is correctly and securely plugged into your device's charging port.
- Confirm that the DC connector type and polarity match your device's requirements.
- Ensure your device's battery is not completely depleted to a point where it cannot initiate charging.
- Charger Overheating:
- Ensure the charger is in a well-ventilated area and not covered.
- If overheating persists, discontinue use and contact support.
- Green LED but Not Fully Charged:
- This might indicate a poor connection or an issue with the battery itself. Re-seat the DC connector.
- If the issue persists, consult your battery manufacturer or contact support.
If troubleshooting steps do not resolve the issue, please refer to the Warranty/Support section.
6. Specifications
| Feature | Description |
|---|---|
| Model No. | C120-V546A20 |
| Input Voltage | AC 100V-240V, 50/60Hz, 2.0A |
| Output Voltage | DC 54.6V |
| Output Current Options | 2A / 3A / 4A (Fixed per SKU) |
| Output Power | 109.2W (for 2A) / 163.8W (for 3A) / 218.4W (for 4A) |
| Efficiency | >92% at 230V AC, full load |
| Operating Temperature | -20°C to 40°C (-4°F to 104°F) |
| Cooling Method | Fanless Natural Cooling |
| Charger Dimensions | 17.3 x 8.1 x 3.5 cm (6.82 x 3.19 x 1.38 inches) |
| Weight | 0.6 kg / 1.32 lbs |
| DC Plug Diameter | 5.5mm x 2.1mm (and other included connectors) |
| LED Indicator | Red: Charging; Green: Fully Charged / Disconnect |
| Protection Features | Short Circuit, Overvoltage, Overpower, Reverse Polarity, DC Anti-Spark |
| Certifications | RoHs, CE, FCC, UL, KC, PSE, WEEE |
7. User Tips
- Battery Compatibility is Key: Always confirm your battery requires 54.6V charging. This charger is specifically designed for 48V 13S Li-ion batteries. A '48V' label alone on your battery does not guarantee compatibility; check the exact charging voltage required.
- Choose the Right Amperage: Select the 2A, 3A, or 4A version based on your battery manufacturer’s charging current recommendations. While higher amperage can reduce charging time, your battery and its Battery Management System (BMS) must support it.
- Fixed Output: The charger's voltage (54.6V) and selected current (2A/3A/4A) are fixed and cannot be adjusted. Ensure you order the correct specification.
- Plug Types: The 'US Plug' or 'EU Plug' option refers to the AC mains input plug. This does not specify the battery-side DC connector. Double-check both the AC input and DC output connector types before purchasing.
- Unsure About Compatibility? If you are uncertain which version to buy, take clear photos of your battery label, your original charger's label, and your device's charging connector. Include any available dimensions or polarity information and contact the seller for assistance.
8. Warranty & Support
Limited Warranty
This product comes with a 12-month warranty from the original purchase date. This warranty applies exclusively to the charger. The seller guarantees that this battery charger will be replaced if it fails due to defects in material or workmanship during the warranty period.
A dated purchase receipt or invoice is required for all warranty claims. The replacement or repair of other products (e.g., your battery or device) will be at the owner's expense.
The Warranty is Void If:
- The warranty period has passed.
- No valid purchase receipt or invoice is provided.
- The damage is caused by improper operation or misuse.
- The owner does not follow the instructions provided in this manual.
- The damages are caused by force majeure (e.g., natural disasters, accidents).
Technical Support
If you have questions about installation, operation, or encounter any technical issues, please contact our technical support team:
Email: tech@bmsbattery.com
Please provide your order number and a detailed description of the issue for faster assistance.