Pecron E2400 LFP

Contents

Pecron E2400 LFP Portable Power Station

User Manual

Model: E2400 LFP | Brand: Pecron

1. Introduction

Thank you for choosing the Pecron E2400 LFP Portable Power Station. This device is a high-capacity, versatile power solution designed for home backup, outdoor camping, RV power, and emergency situations. Featuring a robust LiFePO4 battery, multiple output options, fast charging, and smart control, the E2400 LFP provides reliable power wherever you need it.

This manual provides essential information on how to safely and effectively use your power station. Please read it thoroughly before operation and keep it for future reference.

2. Important Safety Instructions

Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not place the device near heat sources (fire, heating furnace).
  • Do not immerse in any liquid or expose to rain/wet conditions.
  • Do not use in strong static electricity or electromagnetic environments.
  • Do not disassemble or puncture the product with sharp objects.
  • Avoid short circuits caused by wires or other fluids contacting electrical wiring.
  • Use only Pecron-provided accessories and parts.
  • Operate within the specified ambient temperature range (-20°C to 45°C). Extreme temperatures can degrade battery performance or cause hazards.
  • Do not stack heavy objects on the unit.
  • Ensure air vents are not blocked during use; do not operate in non-ventilated or dusty spaces.
  • Avoid impacts, falls, and violent vibrations. If severe impact occurs, turn off the device immediately.
  • If the device accidentally falls into water, place it in a safe, open area until completely dry. Do not reuse a dried unit; dispose of it properly.
  • If the device catches fire, use appropriate extinguishing equipment (water mist, sand, fire blanket, dry chemical, CO2 extinguisher).
  • Clean the surface with a dry cloth.
  • Store out of reach of children and pets.
Built-in BMS for safety
Figure 2.1: Stable & Reliable Power with Built-in BMS (Battery Management System) for safety.

3. Package Contents

Please check the package contents upon unboxing:

  • Pecron E2400 LFP Portable Power Station x 1
  • AC Charging Cable x 1
  • MC4 Solar Charging Cable (LSMC4-5GX16) x 1
  • Car Charging Cable x 1
  • 12V Alligator Clips x 1
  • Accessory Pouch x 1
  • User Manual x 1
Accessories case open
Figure 3.1: Included accessories in the pouch.
Accessories case closed
Figure 3.2: Accessory pouch.

4. Product Overview

Familiarize yourself with the ports and features of your Pecron E2400 LFP.

Pecron E2400 LFP front panel diagram
Figure 4.1: Pecron E2400 LFP Front Panel Layout.
  1. LCD Display
  2. DC 32V~95V Charging Port
  3. DC 12V~18V Charging Port
  4. AC 220V~240V Input
  5. AC 220V~240V Output
  6. DC 12V/USB Switch
  7. AC 220V~240V Switch
  8. DC 12V XT60 Output
  9. DC 12V Auxiliary Output (Cigar Port)
  10. DC 12V (5525) Output
  11. USB-A/USB-C Ports
  12. Battery Expansion Port
12 Output Options diagram
Figure 4.2: The E2400 LFP offers 12 diverse output options for various devices.

5. Setup and Initial Charging

5.1 Initial Charging

Before first use, it is recommended to fully charge your Pecron E2400 LFP. The unit can be charged via wall outlet, solar panels, or car charger.

Recharge Anywhere options
Figure 5.1: Multiple charging options: Wall, Solar, and Car.
  • Wall Charging (AC Input): Connect the AC charging cable to the unit's AC input port and then to a wall outlet. The E2400 LFP supports 1800W ultra-fast AC charging, achieving a full charge in approximately 1.5 hours.
  • Solar Panel Charging (DC Input): Connect compatible solar panels to the DC 32V~95V or DC 12V~18V charging ports. The unit supports up to 800W solar input (GX16MF + DC5521). Charging time varies based on solar intensity and panel wattage (approx. 3-3.5 hours with optimal 800W input).
  • Car Charging (DC Input): Use the car charging cable to connect the unit to your vehicle's 12V/24V cigarette lighter port. This method typically takes longer (approx. 4.5 hours for 500W car charging).
Fast Charging in 1.5 hours
Figure 5.2: The E2400 LFP can be fully charged in just 1.5 hours via AC input.

6. Operating Instructions

6.1 Powering On/Off

  • To turn on/off DC/USB output: Press and hold the DC/USB switch.
  • To turn on/off AC output: Press and hold the AC switch. (Turn off AC function if no AC load is connected for extended periods).

6.2 LCD Smart Display

The LCD display provides real-time information about the power station's status.

LCD Smart Display diagram
Figure 6.1: LCD Smart Display with indicators and values.
  • Charge Indicator: Shows when the unit is charging.
  • Discharge Indicator: Shows when the unit is discharging.
  • Net Input/Output Wattage: Current power input or output.
  • DC Out: DC output status.
  • AC Output Wattage(W)/Voltage(V): AC output power and voltage.
  • AC Out: AC output status.
  • PF Value/Remaining Charging/Discharging Time(Hrs): Power factor and estimated time.
  • Time Indicator: Current time.
  • UPS Icon: Indicates UPS function is active.
  • Temperature Alarm: Flashes if inverter overheats (AC output will turn off).
  • Battery SoC(%): State of Charge (battery percentage).
  • Voltage(V): Battery voltage.
  • AC Overload Alarm: Flashes if AC output exceeds 2400W (unit will stop supplying power).
  • Wireless Connection Icon: Indicates Wi-Fi connection status.

6.3 Using AC/DC Outputs

Once the unit is powered on and the respective output (AC or DC) is activated, you can connect your devices. Ensure the total power consumption of connected devices does not exceed the rated output (2400W for AC, 360W for DC).

Power Up Multiple Devices
Figure 6.2: The E2400 LFP can power various devices for extended periods.

6.4 UPS Function

The E2400 LFP supports Uninterruptible Power Supply (UPS) functionality. It provides near-instantaneous (within 8-20ms) protection against unexpected power interruptions from the main power supply. This function is suitable for loads under 2400W.

Note:

  • Not applicable for applications requiring transfer time under 8ms (e.g., servers, workstations).
  • Connect only one device at a time to avoid overload.
  • Pecron is not responsible for damage or data loss due to failure to follow instructions.
UPS Function diagram
Figure 6.3: UPS Function provides seamless power during outages.

6.5 App Smart Control

You can connect to your E2400 LFP via the Pecron APP for remote control, monitoring, and personalized settings.

  • Pairing Mode: Long press and hold the DC+AC buttons simultaneously to enter pairing mode.
  • Download App: Search for 'PECRON' on Apple App Store (iOS) or Google Play Store (Android).
  • Features: Check machine status, view power level, customize charging power, remote switch.
App Smart Control interface
Figure 6.4: Monitor and control your E2400 LFP with the Pecron App.

6.6 Adjusting AC Output Settings

You can adjust AC output frequency, voltage, and auto-shutdown time.

  1. Enter Setting Mode: After powering on, long press AC and DC switches simultaneously until the battery symbol flashes. Then long press DC to enter settings.
  2. AC Output Frequency (Item 001): Short press DC to toggle between 50Hz or 60Hz. Short press AC to move to the next item.
  3. AC Output Voltage (Item 002): Short press DC to adjust voltage. Short press AC to move to the next item.
  4. Auto Shutdown Time (Item 003): Default is OFF. Short press DC to set desired time. Short press AC to move to the next item.
  5. Wi-Fi Reset (Item 004): Short press DC to activate 'RST' (reset command).
  6. Exit Settings: Short press AC to finish. The display will show 'EEP' upon successful setting.

6.7 Expandable Battery Solutions

The E2400 LFP's capacity can be expanded by connecting up to two EP3000-48V power packs via the MJ32 socket, reaching a maximum of 8192Wh.

Warning: Do not use non-Pecron power packs, as this may damage the power supply.

Scalable Power Solutions
Figure 6.5: Expand your power capacity up to 8192Wh.
Flexible Energy Expansion
Figure 6.6: Expansion configurations: E2400LFP + EP3000-48V = 5120Wh; E2400LFP + EP3000-48Vx2 = 8192Wh.

6.8 Solar Panel Charging Configurations

The E2400 LFP supports various solar panel configurations. Always ensure the voltage specifications are met to avoid damaging the unit.

  • DC5521 Charging Port: PV/DC 12V~18V, 100W max. VOC (open circuit voltage) of solar panel must be less than 25V.
  • GX16MF-5 Charging Port: PV (operating voltage) range 32V~95V, 700W max. VOC of solar panel/array must be less than 95V.

Important: Do not wire more than two 36V solar panels in series, or more than four 18V solar panels in series.

6.8.1 Charging with One Solar Panel

Connect a single solar panel to either the DC5521 or GX16MF-5 port, ensuring voltage compatibility.

6.8.2 Charging with Two Solar Panels in Series

Connect two solar panels in series to the GX16MF-5 port. Recommended VOC of a single panel less than 48V, VMP greater than 16V.

6.8.3 Charging with Three Solar Panels in Parallel

Connect three solar panels in parallel using Y-branch MC4 charging cables (sold separately) to the GX16MF-5 port. Recommended VOC of a single panel less than 95V, VMP greater than 32V.

Warning: Do NOT wire three solar panels in series to the GX16MF-5 port. Exceeding 95V open circuit voltage will damage the MPPT controller.

7. Maintenance and Storage

7.1 General Maintenance

  • Keep the unit clean and free from dust.
  • Ensure proper ventilation during use to prevent overheating.
  • Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.

7.2 Long-Term Storage

If storing the E2400 LFP for an extended period:

  • Turn off the unit.
  • Store in a dry, well-ventilated place at normal room temperature.
  • Avoid placing near water sources or in moist environments.
  • For optimal battery life, discharge the battery to 30% and recharge to 60% every three months.

8. Troubleshooting (FAQs)

Here are some frequently asked questions and their solutions:

Q1: What type of battery is used in E2400 LFP? How long can it last?
A1: E2400 LFP utilizes high-quality UL certified automotive LiFePO4 battery. It can retain 80% of its original capacity at 3500 complete charge cycles.
Q2: What devices can E2400 LFP power?
A2: AC output port powers devices less than 2400W. DC output port powers devices less than 12V-30A.
Q3: Can the E2400 LFP be used as UPS?
A3: Yes, it supports UPS function with an automatic switchover time of 8~20ms.
Q4: How to calculate the E2400 LFP running time?
A4: Running Time = Total Capacity (2048Wh) * 0.85 (Depth of Discharge) / Loading Power (Watts).
Q5: Does E2400 LFP have built-in MPPT charge controller?
A5: Yes, it has two independent built-in MPPT charge controllers:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.