1. Product Overview
The URLIFE E20 PRO is a high-power electric bike designed for various terrains, including snow, beach, and urban commutes. It features a robust motor, long-range battery, and comfortable riding experience.
Key Components:
- Handlebar
- Saddle
- Rack
- Rearlight
- Motor
- Chain
- Pedal
- Battery
- Frame
- Front light
- Fork
- Disc brake
- Tire (tyre)
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | URLIFE |
| Model Number | E20 PRO |
| Certification | CE |
| E-bike Weight | 27 ± 0.3 KG (86 Lbs) |
| E-bike Size | 1750 × 720 × 1170 mm |
| Wheel Diameter | 20 inches |
| Max Speed | < 25 km/h |
| Range per Power | 90-110 KM (80-100 Miles) |
| Motor Power | 250 W Brushless Motor |
| Motor Torque | 80 N.M |
| Max Slope | 30° |
| Brake Type | Mechanical Disc Brake (Front & Rear) |
| Max Load Capacity | 120 KG (265 Lbs) |
| Battery Capacity | 48V 15.6AH Detachable Lithium Battery |
| Charger Input | AC 100-240V |
| Charger Output | DC54.6 |
| Charging Time | 5-6 Hours |
| Operating Temperature | -10 ~ 45°C |
| Rated Passenger Capacity | One Seat |
| Style | Multi-use Design |
| Power Supply / Source | Lithium battery |
| Folded | No |
| Frame Material | Carbon Steel |
| Tires | 20x4.0 inch All-terrain Fat Tires |
| Transmission | Shimano 7-Speed |
3. Setup
3.1 Unpacking and Initial Assembly
Your URLIFE E20 PRO electric bike comes partially assembled. Follow these steps for final assembly:
- Carefully remove the bike and all components from the packaging.
- Attach the handlebars, ensuring they are securely fastened.
- Install the front fender and front wheel.
- Attach the seat and adjust to a comfortable height.
- Install the pedals, ensuring they are tightened correctly (left and right pedals are usually marked).
- Attach any reflectors and ensure they are undamaged and clean.
- Perform an initial check of all bolts and quick releases to ensure they are tight.
3.2 Battery Installation and Initial Charge
The 48V 15.6AH lithium battery is detachable. For initial use, ensure the battery is fully charged.
- Insert the battery into its compartment on the bike frame. Ensure it clicks securely into place.
- Connect the charger to the battery first, then plug the charger into a power source (AC 100-240V).
- Charge the battery for 5-6 hours until the charger's indicator light turns green.
- After charging, disconnect the power source first, then remove the charger from the battery.
Important: Do not leave the charger connected to the power source when not charging. Do not charge for more than 12 hours.
3.3 Pre-Ride Checks
- Tire Pressure: Check tire pressure before riding; the recommended pressure is 35-45 PSI.
- Brakes: Ensure the front and rear disc brakes are working properly.
- Handlebars & Wheels: Verify that the handlebars and wheels are securely fastened.
- Lights & Reflectors: Check the front and rear lights and ensure all reflectors are undamaged and clean.
- Battery: Confirm the battery is securely installed and sufficiently charged.
4. Operating Instructions
4.1 General Safety Measures
- Always wear a helmet and appropriate protective equipment.
- Obey all local traffic laws and regulations.
- Yield to pedestrians.
- Do not ride on motor vehicle lanes or crowded sidewalks.
- Do not carry passengers or items beyond legal limits (Max Load Capacity: 120 KG).
- Do not lend the bicycle to anyone unable to operate it safely.
4.2 Riding Modes and Speed
The E20 PRO offers pedal-assist and throttle modes. The maximum speed is limited to 25 km/h.
- Pedal-Assist: The motor provides assistance as you pedal. Adjust the assist level via the LCD display.
- Throttle: Use the throttle for power without pedaling.
- Speed Limit: Ride at a speed not exceeding 15 km/h on non-motorized lanes, downhill, or uneven roads. If no non-motorized lane is available, ride on the right side of the road.
4.3 LCD Color Display
The IP54 waterproof LCD display provides essential riding information:
- Real-time Speed (mph/km/h)
- Battery Level
- PAS (Pedal Assist System) Level
- Trip Distance
- ODO (Odometer)
- Wattage
- Headlight Indicator
- Brake Indicator
Use the controls on the handlebar to navigate through display options and adjust settings like PAS level or turn on/off headlights.
4.4 Gear Shifting and Braking
- 7-Speed Shimano Transmission: Shift gears freely to adapt to different terrains (flat roads, slopes, rough roads). Use lower gears for climbing and higher gears for speed on flat surfaces.
- Disc Brakes: The front and rear mechanical disc brakes provide powerful and sensitive stopping power. Apply both brakes smoothly for controlled deceleration.
4.5 Lights
The bike is equipped with high-brightness front and rear safety lights for improved visibility, especially at night. Operate them via the controls on the handlebar.
5. Maintenance
5.1 Battery Care and Storage
- Charging Temperature: Charge within 0°C to 45°C.
- Discharge Temperature: Discharge within -20°C to 60°C.
- Dry Storage: Keep the battery dry.
- Avoid Liquids: Do not expose the battery to acidic or alkaline liquids, rain, or high-temperature environments.
- Original Charger: Use only the original charger. Do not charge for more than 12 hours, and ensure the charging current does not exceed 2 amps.
- Long-Term Storage: If not used for an extended period, store in a cool, dry place and recharge twice a month.
- Disposal: Do not disassemble used batteries. Recycle them through professional departments.
5.2 Charging Guide
- Compatibility: Ensure the charger is compatible with the battery type and voltage.
- Ventilation: Charge in a well-ventilated area, avoiding enclosed spaces or direct sunlight.
- Connection Order: Connect the battery first, then plug into the power source. Disconnect power source first, then remove battery.
- Indicator Light: Stop charging when the green light turns on.
- Abnormalities: If the indicator light shows abnormalities, strange odor, or overheating, stop charging immediately and inspect or replace the charger.
- Protection: Avoid foreign objects, especially water or other liquids, from entering the charger.
- Transport: Never carry the charger with the bicycle unless it is properly cushioned and placed in a tool case.
5.3 General Maintenance Checks
- Regularly check tire pressure (35-45 PSI).
- Inspect front and rear brakes for proper function.
- Ensure handlebars and wheels are securely fastened.
- Verify that all reflectors are undamaged and clean.
- Check the circuit, lighting, and other systems before each ride.
6. Troubleshooting
6.1 Common Issues and Solutions
- Battery Not Charging:
- Ensure charger is properly connected to both battery and power outlet.
- Check if the power outlet is functional.
- Verify the charger's indicator light. If abnormal (no light, strange color), replace the charger.
- Ensure charging temperature is within 0°C to 45°C.
- Motor Not Engaging:
- Check battery level on the LCD display.
- Ensure the battery is securely seated in its compartment.
- Verify all electrical connections are secure.
- Loose Components / Rattling Noise:
- Inspect all visible bolts and fasteners, especially around the controller housing, and tighten as necessary.
- Check for any loose cables or accessories that might be causing noise.
- Brakes Not Responsive:
- Check brake levers for proper tension and engagement.
- Inspect brake pads for wear and replace if necessary.
- Ensure brake cables are not frayed or stretched.
For issues not listed or if problems persist, please contact customer support.
7. Warranty and Support
7.1 Warranty Information
The URLIFE E20 PRO electric bike comes with a 1-year full warranty covering the frame, battery, and motor against quality defects. This warranty does not cover damage resulting from improper use, unauthorized modifications (refit), or collisions.
7.2 Customer Support
For any concerns, technical assistance, or warranty claims, please contact our professional after-sales team. Refer to your purchase documentation for specific contact details.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)
8. User Tips
- Secure Loose Parts: If you notice any rattling or loose components, such as the controller housing, secure them with a cable tie or appropriate fastener to prevent noise and potential damage.
- Check Local Laws: Always verify and comply with local regulations regarding electric bike usage, especially concerning riding on sidewalks or specific lanes.
- Regular Checks: Perform quick checks of brakes, tire pressure, and battery charge before each ride for optimal performance and safety.
9. Compliance Statement
Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.