SMAEL 8138

Contents

SMAEL 8138 Dual Display Military Watch

User Instruction Manual

Introduction

Thank you for choosing the SMAEL 8138 Dual Display Military Watch. This robust timepiece is designed for durability and functionality, featuring a dual analog-digital display, 50-meter water resistance, LED backlight, alarm, chronograph, and shock resistance. This manual provides detailed instructions to help you set up and operate your watch effectively.

Front view of the SMAEL 8138 watch with a colorful bezel, displaying time, date, and day.
The SMAEL 8138 Dual Display Military Watch.

Watch Overview and Button Functions

The SMAEL 8138 watch features four primary buttons and a crown for various functions:

Diagram showing the functions of the SMAEL 8138 watch buttons: LIGHT (A), START/STOP (D), MODE (B), RESET (C).
Button layout and functions.
  • Button A (LIGHT): Activates the EL backlight.
  • Button B (MODE): Cycles through different modes (Time, Chronograph, Alarm, Time Setting).
  • Button C (RESET): Used for resetting values or confirming selections in setting modes.
  • Button D (START/STOP): Used for starting/stopping functions or adjusting values in setting modes.
  • Crown: Used for setting the analog time.

Initial Setup

Setting Analog Time

  1. Pull out the crown located on the right side of the watch.
  2. Rotate the crown to move the hour and minute hands to the desired time.
  3. Push the crown back in to secure the analog time setting.

Setting Digital Time and Date

  1. From the normal time display mode, press Button B (MODE) three times to enter the time and date setting mode. The seconds will start flashing.
  2. Press Button D (START/STOP) to zero the seconds.
  3. Press Button C (RESET) to move to the hour setting. The hours will flash.
  4. Press Button D (START/STOP) to adjust the hour. You can also toggle between 12-hour and 24-hour format here.
  5. Press Button C (RESET) to move to the minute setting. The minutes will flash.
  6. Press Button D (START/STOP) to adjust the minutes.
  7. Press Button C (RESET) to move to the month setting. The month will flash.
  8. Press Button D (START/STOP) to adjust the month.
  9. Press Button C (RESET) to move to the date setting. The date will flash.
  10. Press Button D (START/STOP) to adjust the date.
  11. Press Button C (RESET) to move to the day of the week setting. The day will flash.
  12. Press Button D (START/STOP) to adjust the day of the week.
  13. Press Button B (MODE) to exit the setting mode and return to the normal display.

Setting the Alarm

  1. From the normal time display mode, press Button B (MODE) twice to enter the Alarm Mode.
  2. Press Button C (RESET) to select the hour setting. The hour will flash.
  3. Press Button D (START/STOP) to adjust the alarm hour. Pay attention to AM/PM if in 12-hour format.
  4. Press Button C (RESET) to select the minute setting. The minutes will flash.
  5. Press Button D (START/STOP) to adjust the alarm minutes.
  6. Press Button B (MODE) to exit the alarm setting mode.

Operating Functions

Mode Switching

Press Button B (MODE) to cycle through the different operational modes: Normal Time Display → Chronograph Mode → Alarm Mode → Time Setting Mode.

EL Backlight

At any mode, press Button A (LIGHT) to activate the EL backlight. The backlight will illuminate for approximately 3 seconds, allowing you to read the display in low-light conditions.

SMAEL 8138 watch on a wrist in low light, demonstrating the LED night light display.
The LED Night Light Display provides clear visibility in the dark.

Using the Chronograph (Stopwatch)

  1. From the normal time display mode, press Button B (MODE) once to enter Chronograph Mode.
  2. Press Button D (START/STOP) to start the stopwatch.
  3. Press Button D (START/STOP) again to stop the stopwatch.
  4. To continue timing, press Button D (START/STOP).
  5. To reset the stopwatch to zero, press Button C (RESET) while the stopwatch is stopped.

Alarm and Hourly Chime ON/OFF

  1. From the normal time display mode, press Button B (MODE) twice to enter Alarm Mode.
  2. Press Button D (START/STOP) to toggle the alarm (ALM) and hourly chime (SIG) functions ON or OFF.
  3. When the ALM/SIG symbol appears on the display, the respective function is ON. If no symbol is shown, it is OFF.

Maintenance

Water Resistance (50M)

Your SMAEL 8138 watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for daily use, hand washing, showering, and swimming in shallow water. However, it is crucial to NEVER press any buttons while the watch is submerged in water, as this can compromise the water seal and lead to internal damage.

SMAEL 8138 watch partially submerged in water, demonstrating its 50-meter waterproof capability.
The watch is designed for 50-meter water resistance.

Video demonstrating the watch's water resistance and wearability.

General Care

  • Clean the watch regularly with a soft, damp cloth to remove dirt and sweat.
  • Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
  • The watch features a durable mineral glass dial window and a stainless steel back for enhanced protection.
Images highlighting the Mineral Glass and Stainless Steel Back of the SMAEL 8138 watch.
Details on Mineral Glass and Stainless Steel Back for durability.

Troubleshooting

  • Digital display blank or dim: The battery may be low. Replace the battery.
  • Analog hands not moving: Check if the crown is pushed in completely. If it is, the battery for the analog movement might be depleted.
  • Incorrect time/date: Follow the setting instructions carefully. Ensure you are in the correct setting mode.
  • Water inside the watch: If water appears inside the watch, stop using it immediately and seek professional service. This indicates a compromised seal.

Specifications

Feature Specification
Brand NameSMAEL
Model Number8138
Display TypeAnalog-Digital
MovementQuartz, Dual Display
Case MaterialRubber
Band Material TypePlastic (TPU)
Clasp TypeBuckle
Dial Window Material TypeAcrylic (Plexiglass)
Water Resistance Depth5Bar (50 meters)
Case Thickness18mm
Dial Diameter53mm
Band Width22mm
Band Length27cm (approx. 130mm/80mm sections)
Net Weight79g
Battery IncludedYes
FeaturesStop Watch, Back Light, Shock Resistant, LED Display, Repeater, Luminous, Auto Date, Chronograph, Complete Calendar, Multiple Time Zone, Water-Resistance, Alarm, Swim, Week Display, Luminous Hands
Diagram illustrating the dimensions of the SMAEL 8138 watch: case diameter, case thickness, and band width.
Product dimensions.
Table of product specifications for SMAEL 8138 watch, including materials, waterproof level, and movement type.
Detailed product specifications.

User Tips

  • Water Resistance Caution: While the watch is 50M waterproof, always remember to avoid pressing any buttons when the watch is wet or submerged to prevent water ingress.
  • Battery Life: If the digital display becomes faint or unresponsive, it's likely time to replace the battery. Consult a professional for battery replacement to maintain water resistance.
  • Strap Comfort: The TPU strap is designed for comfort and durability. Ensure it's adjusted snugly but not too tightly for optimal wear.

Warranty & Support

For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF manual here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.