Puluma FM2.0

Contents

Puluma FM2.0 Adult Electric Bike User Manual

Model: FM2.0

Brand: Puluma

1. Introduction

Thank you for choosing the Puluma FM2.0 Adult Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new e-bike. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Puluma FM2.0 Electric Bike (White) - Side View
Figure 1: Puluma FM2.0 Electric Bike (White)

2. Important Safety Information

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

  • Always wear a helmet and appropriate safety gear when riding.
  • Familiarize yourself with local e-bike laws and regulations.
  • Perform a pre-ride safety check before each use.
  • Do not ride under the influence of alcohol or drugs.
  • Be aware of your surroundings and ride defensively.
  • Ensure all quick releases and fasteners are securely tightened before riding.
  • Do not modify the e-bike's electrical system or components.

3. Package Contents

Your Puluma FM2.0 Electric Bike package should include the following items:

  • Puluma FM2.0 Electric Bike (partially assembled)
  • 48V 15Ah Lithium Battery
  • Battery Charger
  • User Manual (this document)
  • Assembly Tools (basic wrenches, hex keys)
  • Pedals

Please inspect all components upon receipt. If any items are missing or damaged, contact customer support immediately.

4. Assembly and Initial Setup

4.1 Unfolding the Bike

The Puluma FM2.0 is a foldable electric bike. To unfold:

  1. Place the bike on a flat surface.
  2. Locate the main frame hinge latch (usually in the middle of the frame).
  3. Release the latch and carefully unfold the frame until it locks into place. Ensure the latch is fully secured.
  4. Unfold the handlebar stem and secure its latch.
  5. Adjust the handlebar height and angle to your preference, then tighten the quick release.
  6. Insert the seat post into the frame and adjust the seat height. Secure the quick release.
  7. Attach the pedals (note: left and right pedals are usually marked 'L' and 'R' and thread in opposite directions).
Puluma FM2.0 Electric Bike - Folded State
Figure 2: Puluma FM2.0 Electric Bike in folded configuration

4.2 Battery Installation and Charging

The bike comes with a removable 48V 15Ah Lithium battery.

  1. Installation: Slide the battery into its compartment on the frame until it clicks securely into place. Use the key to lock the battery if available.
  2. Charging: Connect the charger to a standard wall outlet and then to the battery's charging port. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).
  3. First Charge: For the first use, charge the battery fully (typically 6-8 hours) before riding.
  4. Removal: Unlock the battery with the key (if applicable) and slide it out for charging or storage.
Removable Lithium Battery and Charging Details
Figure 3: Removable Lithium Battery and Charging

5. Operating Instructions

5.1 Powering On/Off and Display

To power on the bike, press and hold the power button on the smart display. The display will illuminate, showing real-time speed, battery status, ODO & trip distance, and PAS level.

Shimano 7-Speed and Smart Display Controls
Figure 4: Smart Multi-Function Display and Shimano 7-Speed Shifter

5.2 Pedal Assist System (PAS)

The bike features a 5-level pedal assist system. Use the '+' and '-' buttons on the handlebar control to adjust the assist level. Higher levels provide more motor assistance, while lower levels require more pedaling effort.

  • Level 0: No assist (pure pedal power).
  • Level 1 (ECO): Minimal assist, maximum range.
  • Level 5 (POWERFUL): Maximum assist, for hills or quick acceleration.

5.3 Throttle Operation (if applicable)

Some models may include a thumb or twist throttle for pure electric mode. Engage the throttle to propel the bike without pedaling. Be mindful of local regulations regarding throttle use.

5.4 Shimano 7-Speed Gearing

The Shimano 7-speed shifting system allows you to adapt to various terrains and riding conditions. Use the shifter on the right handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.

5.5 Riding Modes

  • Pedal-Assist Mode: Engage the PAS system and pedal normally. The motor will provide assistance based on the selected level.
  • Pure Electric Mode: Use the throttle (if available) to ride without pedaling.
  • Manual Mode: Ride the bike like a traditional bicycle with no motor assistance (PAS level 0).

6. Maintenance

6.1 Battery Care

  • Charge the battery regularly, even if not in use, to maintain its health.
  • Avoid fully discharging the battery.
  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not expose the battery to water or moisture.
  • If storing for an extended period, charge the battery to 50-70% and check it every 2-3 months.

6.2 Tire Pressure

The 20*4.0 inch fat tires require specific pressure for optimal performance and comfort. Check tire pressure regularly using a pressure gauge. Recommended pressure is typically indicated on the tire sidewall (e.g., 5-30 PSI), but adjust based on terrain and rider weight.

20*4.0 Fat Tires and All-Terrain Capabilities
Figure 5: 20*4.0 Inch Fat Tires for All-Terrain Riding

6.3 Brakes

Regularly inspect the disc brakes for wear and tear. Ensure brake levers are firm and responsive. Adjust or replace brake pads as needed. If you are unsure, consult a professional bike mechanic.

6.4 Chain and Drivetrain

Keep the chain clean and lubricated to ensure smooth shifting and prevent premature wear. Regularly check the gears for proper alignment and function.

6.5 General Cleaning

Clean the bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components. Dry the bike thoroughly after cleaning.

7. Troubleshooting

ProblemPossible CauseSolution
Bike does not power onBattery not charged/installed correctly; loose connectionsEnsure battery is fully charged and properly seated. Check all electrical connections.
Motor not assistingPAS level 0; battery low; sensor issueIncrease PAS level. Charge battery. Check for any error codes on the display.
Gears not shifting smoothlyDirty/unlubricated chain; misaligned derailleurClean and lubricate the chain. Adjust derailleur (consult a mechanic if unsure).
Brakes feel spongyAir in hydraulic lines; worn brake padsBleed brakes or replace pads. Seek professional help for hydraulic brake issues.
Tires losing air quicklyPuncture; valve stem issueInspect tires for punctures and repair/replace tube. Check valve stem for leaks.

8. Specifications

FeatureSpecification
Model NumberFM2.0
CertificationCE
Rated Passenger CapacityTwo Seat
StyleLuxury Type
Max Speed<25km/h
Range per Power (Pedal Assist)60-80 km
Range per Power (Pure Electric)40-50 km
Power SupplyLithium battery
Voltage48V
Battery Capacity15Ah
Motor TypeBrushless
FoldedYes
Wheel Size20″
Tire Type20*4.0 Wide Fat Tires
Frame MaterialAluminum alloy
GearsShimano 7-Speed
OriginMainland China

9. User Tips

  • Pre-Ride Check: Always check tire pressure, brake function, and battery level before each ride.
  • Gear & Assist: Use a combination of gears and pedal assist levels to optimize your ride and battery life. Start in a lower gear and assist level, then increase as needed.
  • Folding: Practice folding and unfolding the bike a few times to become familiar with the mechanism. Ensure all latches are securely fastened before riding.
  • Battery Range: Factors like rider weight, terrain, wind, and assist level can affect battery range. Plan your rides accordingly.
  • Storage: When storing the bike, especially for long periods, keep it in a dry place and ensure the battery is partially charged (50-70%).

10. Warranty and Support

For any warranty claims, technical support, or questions regarding your Puluma FM2.0 Electric Bike, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For information regarding return and refund policies, please refer to the seller's specific terms and conditions at the time of purchase.

11. Disclaimer

The manufacturer and seller are not responsible for any damage, injury, or loss caused by improper use, maintenance, or modification of the product. Always adhere to the instructions provided in this manual and local traffic laws.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.