IScooter K4

Contents

IScooter K4 Kids Electric Scooter User Manual

Model: K4 | Brand: IScooter

1. Safety Instructions

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

This manual contains essential safety information. For your child's safety, it is important that you review this manual with your children and ensure they understand all warnings, cautions, and instructions. Children should always ride under adult supervision. We recommend regularly reviewing this manual and performing inspections and maintenance on the electric scooter to ensure safe riding.

General Safety Warnings

  • This product is only suitable for children above 6 years old, not for adults.
  • No passengers are allowed.
  • A helmet and other protective equipment are required during riding.
  • Do not ride it in unsafe or illegal places.
  • Practice in an open area first and ride only after the rider has mastered the skills.
  • Do not make dangerous movements or ride with one hand while riding.
  • Avoid riding on steps, as this may cause the product to tip over, resulting in potential injury or damage.
  • The maximum speed of this product is 10 mph (16 km/h).
  • Avoid using this product in extreme temperatures.
  • If uneven or poor road conditions are encountered, please ride slowly or get off.
  • Do not ride this product on oily or icy surfaces.
  • Do not immerse the product in water or spray water on the scooter body directly.
  • The maximum load is 154 lbs (70 kg). Do not exceed this limit.

Always Inspect Before Riding

  • Always inspect before riding and perform regular maintenance.
  • Check and secure all fasteners before each ride.
  • Replace worn or damaged parts immediately.
  • Use caution when riding, as skill is required to avoid falls or collisions, which could result in injury to the rider or others.

2. Package Contents

Ensure all items are present and in good condition upon unboxing.

Diagram showing the K4 Electric Scooter and its included accessories: Handlebar and mounting kit, Charger, User manual, and Allen wrench.
Figure 2.1: K4 Electric Scooter Package Contents
  • Scooter Body
  • Handlebar & Mounting Kit
  • Charger
  • Hex Wrench
  • User Manual (this document)

3. Product Overview

Familiarize yourself with the components of your K4 Electric Scooter.

Image of K4 Kids Electric Scooter in blue, black, and pink, highlighting 2.6Ah Battery Capacity, 150W Max Motor Power, 9km Max Range, and 6 inch Tire Size.
Figure 3.1: K4 Kids Electric Scooter Overview
Diagram showing the dimensions of the K4 Electric Scooter: 80 cm length, 12 cm deck width, 36 cm handlebar width, and 82-96 cm adjustable height.
Figure 3.2: K4 Electric Scooter Dimensions

Parts List

  1. Handlebar
  2. Height Adjustment Clamp
  3. Stem
  4. Stem Light
  5. Locking Pin Hole
  6. Stem Clamp
  7. Front Tire
  8. Charging Port
  9. Deck
  10. Rear Fender (Brake)
  11. Motor
  12. Kickstand
  13. Ambient Light

4. Setup

4.1 Unfolding the Scooter

Diagram illustrating the steps to unfold the K4 Electric Scooter. Step 1 shows pressing the folding latch, Step 2 shows lifting the stem, and Step 3 shows the scooter fully unfolded.
Figure 4.1: Unfolding the Scooter
  1. Press down the folding latch while lifting the stem upward.
  2. When the front tire touches the ground, place one foot on the deck, and roll the scooter forward until the folding latch locks in place.
  3. Then, engage the kickstand.

Note: If the folding latch feels stiff, gently push the handlebar forward while pressing the latch down to relieve tension.

4.2 Installing the Handlebar

Diagram showing the installation of the handlebar onto the scooter stem using a hex wrench and screws.
Figure 4.2: Handlebar Installation
  1. Place the handlebar on top of the inner telescopic tube, aligning the mounting holes.
  2. Attach the faceplate, making sure the holes are aligned.
  3. Secure them with the screw using the supplied hex wrench.

4.3 Connecting the Cables

Diagram showing two cables with colored connectors (1 and 2) that need to be matched and connected.
Figure 4.3: Cable Connection
  • Match and connect the cables according to their colors.
  • The scooter will not power on if the connections are incorrect.

4.4 Adjusting Handlebar Height

Diagram showing the steps to adjust the handlebar height: 1. Open the clamp, 2. Press the locking pin, 3. Adjust height, 4. Close the clamp.
Figure 4.4: Handlebar Height Adjustment
  1. Once the scooter is fully assembled, adjust the handlebar height as needed.
  2. Open the height adjustment clamp.
  3. Press the locking pin, and raise or lower the handlebar to your desired height.
  4. Release the pin to lock it, then tighten the knob on the clamp and close the clamp.
Image showing two children with scooters, illustrating the 3 adjustable height levels for different ages and cyclist heights.
Figure 4.5: Adjustable Handlebar Heights for Different Ages

5. Operating Instructions

5.1 Controls & Display

Close-up of the scooter's handlebar with an LED display screen, showing icons for cruise control, 3 speed modes, and Bluetooth music playback.
Figure 5.1: LED Display Screen and Controls
LED Display showing 3 Safety Speeds: Economy (E) 5 km/h, Standard (M) 10 km/h, Sports (S) 16 km/h.
Figure 5.2: Speed Level Display

Power Button

  • Turn ON/OFF: Press and hold the Power button to turn the scooter on/off.
  • Note: The scooter will automatically shut down if there is no operation within 5 minutes.
  • Switch Speed Level: With the scooter powered on, double-press the Power button to switch between speed levels (Economy, Standard, Sports).
  • Switch Speed Unit: With the scooter powered on, press the Power button three times to toggle between mph and km/h.

Light Button

  • With the scooter powered on, press the Light button to turn the stem light and ambient light on/off.
  • Once the lights are on, double-press the Light button to cycle through the three available lighting modes (Breathing light, Chasing light, Multicolor light).
  • Image of a pink scooter at dusk, showcasing its bright light system with a standpipe lamp and pedal lights, and mentioning three lighting effects: Breathing light, Chasing light, Multicolor light.
    Figure 5.3: Bright Light System with Multiple Effects

Thumb Throttle

  • While the scooter is moving, press the thumb throttle to accelerate.

Thumb Brake

  • While the scooter is moving, press the thumb brake to slow down.

5.2 Pairing with Your Phone (Bluetooth)

Image of a girl sitting on a bench, controlling her scooter via Bluetooth on her smartphone, with musical notes indicating music playback.
Figure 5.4: Smart Control via Bluetooth for Music Playback
  • The scooter can be paired with a phone after it is turned on.
  • The effective range of Bluetooth is limited. Please make sure to pair the devices within this range.
  • Look for "K4" in your phone's Bluetooth settings to connect.

5.3 Starting to Ride

Image of two children riding K4 Electric Scooters, emphasizing developing balance and enjoyment from a young age.
Figure 5.5: Kids Riding Scooters
  1. Disengage the kickstand.
  2. Turn on the scooter and select your desired speed level.
  3. Hold the handlebar, place one foot on the deck, and push off with the other to start moving.
  4. As the scooter moves, place your other foot on the deck.
  5. Once balanced, press the thumb throttle to accelerate.

5.4 Turning

  • While turning, lean slightly into the direction of the turn and gently turn the handlebar.

5.5 Stopping

Image showing a child riding a pink scooter, with insets illustrating the electronic brake (finger-operated lever) and the physical foot brake (rear wheel mudguard).
Figure 5.6: Dual Braking System (Electronic and Foot Brake)
  • Press the thumb brake or step on the rear fender brake to slow down.
  • Release the thumb throttle to come to a complete stop.

6. Charging

Diagram showing the internal battery pack of the K4 Electric Scooter, labeled as 21.6V 2.6Ah Intelligent BMS System, with a range of 7-9 km and CE Certified.
Figure 6.1: Upgraded Battery System
  • Fully charge the battery before first use.
  • When the battery is low, charge immediately.
  • Only use the original charger to charge the battery.
  • The electric scooter is fully charged when the charger indicator changes from red to green.
  • Keep the charging port cover closed when not charging.
  • The scooter cannot be operated while it is charging.

7. Storage

Folding the Scooter for Storage

Diagram illustrating the steps to fold the K4 Electric Scooter for storage. Step 1 shows pressing the folding latch with a foot, Step 2 shows lowering the stem, and Step 3 shows the scooter fully folded.
Figure 7.1: Folding the Scooter
  1. After riding, the scooter can be folded for easy storage.
  2. Stand on the left side of the scooter and hold the handlebar with both hands.
  3. Press down the folding latch with one foot and lower the stem completely until you hear a click, indicating that the scooter is securely folded.

Note: If the folding latch feels stiff, gently push the handlebar forward while pressing the latch down to relieve tension.

8. Maintenance

Regular maintenance ensures the longevity and safe operation of your K4 Electric Scooter.

  • Regular Inspection: Always inspect the scooter before each ride. Check for any loose parts, damage, or wear.
  • Fasteners: Ensure all screws and fasteners are tight and secure.
  • Tires: The scooter uses 6-inch solid tires, which are explosion-proof and airless, requiring less maintenance than pneumatic tires. However, regularly check for any cuts or damage.
  • Cleaning: Do not immerse the product in water or spray water directly on the scooter body. Use a damp cloth to wipe down the scooter.
  • Battery Care: Follow charging instructions carefully. Avoid fully discharging the battery frequently.
  • Part Replacement: Replace worn or damaged parts immediately. Contact customer support for genuine replacement parts.

9. Troubleshooting

This section addresses common issues you might encounter with your K4 Electric Scooter.

Problem Possible Cause Solution
Scooter does not power on Cables not connected correctly; Low battery; Power button not held long enough. Ensure cables are matched by color and securely connected. Charge the battery. Press and hold the power button for a few seconds.
Scooter not accelerating Thumb throttle not pressed; Scooter not moving initially. Ensure the scooter is moving (pushed off) before pressing the throttle. Press the thumb throttle firmly.
Handlebar feels loose after adjustment Height adjustment clamp not tightened sufficiently. Ensure the knob on the height adjustment clamp is tightened securely after releasing the locking pin.
Folding latch is stiff Tension on the folding mechanism. Gently push the handlebar forward while pressing the latch down to relieve tension.
Bluetooth connection issues Out of range; Scooter not on; Phone Bluetooth off. Ensure scooter is on and within Bluetooth range. Check phone's Bluetooth settings.

10. Specifications

Detailed technical specifications for the K4 Electric Scooter.

Table of K4 Electric Scooter specifications including Max. Motor Power, Range, Max. Speed, Battery Capacity, Bluetooth, Protection Rating, Charging Time, Tires, Recommended Age, Weight, Max. Load, Operating Temperature, Dimensions (unfolded), Dimensions (folded), and Braking.
Figure 10.1: K4 Electric Scooter Specifications Table
Feature Specification
Model Number K4
Category Two-wheel Scooter
Applicable People Children (Recommended Age 6-12 years)
Max Motor Power 150 W
Battery 21.6 V 2.6 Ah
Max Speed 10 mph (16 km/h)
Range 7-9 km
Charging Duration 5-6 hours
Tires 6 Inches, Solid Tire
Brake System Electronic brake with finger-operated lever + rear wheel mudguard with physical foot brake
Erecting Poles Can be extended but not folded
Lighting Lighted pole + lighted footplate on both sides (Breathing lights, flowing lights, scrolling lights)
Max Load 70 Kg (154 lbs)
Net Weight 6.5 kg
Bluetooth Yes
Protection Rating IPX4
Certification RoHs, CE
Operating Temperature -2 to 35 °C
Dimensions (unfolded) 81 x 36 x 95 cm (31.9 x 14.2 x 37.4 in)
Dimensions (folded) 75.5 x 12 x 29 cm

Note: All data is for reference only. Actual values may vary depending on factors such as load, temperature, wind speed, road conditions, and user habits.

Official testing and certification documents for the IScooter K4, showing RoHS and CE compliance.
Figure 10.2: Certifications (RoHS, CE)

11. User Tips

Practical advice from other users and common inquiries to enhance your experience.

  • Check Warranty: For any questions regarding product guarantee or warranty period, please refer to the official warranty information provided by the seller or contact customer support.
  • Pre-Ride Check: Always perform a quick check of all fasteners and brakes before each ride to ensure safety.
  • Practice Makes Perfect: If your child is new to scooters, encourage them to practice in a safe, open area until they are comfortable with the controls and balance.

12. Warranty & Support

Disclaimer

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

FCC SDOC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CE Warning

This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure they do not play with the appliance.

Declaration of Conformity

For the full text of the EU Declaration of Conformity, please contact our support team at support@e-scootworld.com.

Manufacturer Information

Manufacturer: Dongguan Yicheng Shengda Information Technology Co., Ltd.

Address: Room 301, No. 28, Houshan Road, Nanchongkou, Humen Town, Dongguan City, Guangdong Province, China

E-mail: support@e-scootworld.com

For further support or inquiries, please contact the manufacturer directly.

A PDF version of this user manual is available for download: User manual (PDF)

© 2024 IScooter. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.