Espresso Machine AC-517E

Contents

AC-517E Semi-Automatic Espresso Coffee Machine

User Instruction Manual

Introduction

Thank you for purchasing the AC-517E Semi-Automatic Espresso Coffee Machine. This all-in-one machine is designed to provide a professional coffee experience, featuring an integrated grinder, 15-bar pump pressure, and a milk frother. Please read this manual thoroughly before initial use to ensure safe operation and optimal performance.

AC-517E Espresso Coffee Machine in white

Image: The AC-517E Espresso Coffee Machine, showcasing its sleek design.

Key Features

  • Integrated Grinder: All-in-one design for fresh coffee grounds.
  • 15 Bar Pump Pressure: Ensures optimal extraction for rich espresso.
  • 58mm Professional Extraction: Standard size for consistent coffee pucks.
  • PID Temperature Control: Maintains precise brewing temperature for consistent results.
  • Quantitative Extraction: Pre-set 30ml and 60ml options for single and double shots.
  • High-Pressure Milk Frother: For creamy lattes and cappuccinos.
  • Pre-Soaking System: Ensures even saturation of coffee grounds for enhanced flavor.
  • Removable Water Tank: 2.0L capacity for convenience.
Diagram highlighting key features: Grinder, 15 Bar pressure, 58mm extraction, Negative Ion Grinder Unit, PID, Flow Meter Quantification

Image: Diagram illustrating the main components and features of the espresso machine.

Icons representing features: Grinding all-in-one, 58mm extraction, quantitative extraction, 15 bar pressure, patent Italian water pump, 58mm professional coffee powder holder, PID temperature control, pre-soaking system

Image: Visual summary of the machine's advanced features.

Setup

1. Unpacking and Inspection

  • Carefully remove all packaging materials and place the machine on a stable, flat, heat-resistant surface.
  • Check for any damage during transit. Do not operate if damaged.
  • Ensure all accessories are present: Coffee Machine, 58mm Professional Coffee Powder Holder (Portafilter), Milk Cup, Powder Tamper.
Included accessories: Coffee Machine, 58mm Professional Coffee Powder Holder, Milk Cup, Powder Tamper

Image: Overview of the accessories included with the espresso machine.

2. Initial Cleaning

  • Wash the water tank, portafilter, filter basket, milk frother nozzle, and drip tray with warm soapy water. Rinse thoroughly and dry.
  • Wipe the exterior of the machine with a damp cloth.

3. Filling the Water Tank

  • Remove the water tank from the back of the machine.
  • Fill the tank with fresh, cold filtered water up to the MAX level indicator.
  • Place the water tank back securely into its position.
Close-up of the removable transparent water tank and easy clean drip tray

Image: Detail of the transparent, removable water tank and the easy-clean drip tray.

4. Priming the Machine

  • Ensure the machine is plugged into a 220V 50Hz power outlet.
  • Turn on the machine. The indicator lights will illuminate.
  • Place a cup under the coffee outlet. Press the 'Hot Water' button to dispense water until it flows smoothly. This primes the pump and heats the water.

Operating Instructions

1. Grinding Coffee Beans

  • Fill the bean hopper with fresh, roasted coffee beans.
  • Adjust the grind size using the 15-gear grind size adjustment dial. For espresso, a fine grind is typically required.
  • Place the portafilter under the grinder outlet. Press the 'Grind' button to automatically grind the desired amount of coffee into the portafilter.
Details of the grinder: Stainless Steel Conical Grinder, 15 Gear Grind Size Adjustment, Automatic Grinding Coffee Powder, Anion Electrostatic Removal Design

Image: Detailed view of the integrated conical grinder and its 15-gear adjustment.

2. Brewing Espresso

  • After grinding, tamp the coffee grounds firmly and evenly in the 58mm portafilter using the powder tamper.
  • Wipe any excess grounds from the rim of the portafilter.
  • Attach the portafilter to the group head, ensuring it is securely locked in place.
  • Place your espresso cup(s) on the drip tray beneath the portafilter.
  • Select your desired shot size: Press the '30ml' button for a single shot or '60ml' for a double shot. The machine features a built-in quantitative extraction flowmeter.
  • The machine will initiate a pre-soaking phase, followed by extraction at 15 bars of pressure.
  • Once extraction is complete, remove the cup(s).
User pressing the 60ml button for quantitative extraction, with espresso flowing into cups

Image: Demonstrating the quantitative extraction feature with 30ml and 60ml options.

Diagram comparing low pressure pre-soaking with no pre-soaking, showing better saturation

Image: Illustration of the pre-soaking system for optimal coffee saturation.

3. Frothing Milk

  • Fill the milk cup (included) with cold milk, typically up to one-third full.
  • Position the steam wand over the drip tray and open the steam valve briefly to purge any condensed water. Close the valve.
  • Immerse the steam wand tip just below the surface of the milk.
  • Open the steam valve fully. As the milk heats and expands, lower the pitcher slightly to keep the tip just below the surface, creating a whirlpool effect.
  • Once the desired temperature and texture are achieved, close the steam valve and remove the milk cup.
  • Immediately wipe the steam wand with a damp cloth to prevent milk residue from drying.
Person frothing milk using the high-pressure steam wand

Image: High-pressure milk frothing in action.

Maintenance and Cleaning

1. Daily Cleaning

  • Portafilter and Filter Basket: After each use, remove the portafilter, discard the coffee puck (referencing image 9), and rinse the portafilter and filter basket under hot water.
  • Steam Wand: Immediately after frothing milk, wipe the steam wand with a damp cloth. Purge steam briefly to clear any internal milk residue.
  • Drip Tray: Empty and clean the drip tray daily. It is designed for easy removal and cleaning.
  • Group Head: Use a damp cloth to wipe the group head screen and gasket.
Hand holding a clean, ejected coffee puck, indicating easy cleaning

Image: Easy cleaning of the coffee puck after extraction.

2. Water Tank Cleaning

  • The transparent water tank should be cleaned weekly with mild detergent and rinsed thoroughly.

3. Descaling

  • Depending on water hardness and usage, descaling should be performed every 2-3 months.
  • Use a commercial descaling solution specifically designed for coffee machines. Follow the descaler manufacturer's instructions carefully.
  • Run the descaling solution through the machine's water and steam circuits, then rinse thoroughly with several tanks of fresh water.

Troubleshooting

Problem Possible Cause Solution
No coffee dispenses Water tank empty; pump not primed; coffee too finely ground/over-tamped; clogged filter. Fill water tank and prime pump; adjust grind size/tamping pressure; clean filter basket.
Weak or watery coffee Coffee too coarsely ground; insufficient coffee quantity; under-tamped. Adjust grind size finer; use more coffee; tamp more firmly.
No steam from wand Steam function not activated; steam wand clogged. Ensure 'Steam' button is pressed and machine is heated; clean steam wand hole with a pin.
Machine leaking water Water tank not seated correctly; drip tray full; portafilter not sealed. Reseat water tank; empty drip tray; ensure portafilter is locked tightly.

Specifications

Attribute Detail
Product Model AC-517E
Net Product Weight 6.1 kg
Rated Voltage 220V 50Hz
Rated Power (Coffee) 1310W
Rated Power (Grinder) 110W
Pump Pressure 15 Bar
Water Tank Capacity 2.0 L
Product Dimensions (L x W x H) 295 x 280 x 410 mm
Housing Material Stainless Steel
Control Mode Semi-automatic control
Certification CE
Operating Language English
Application Hotel, Commercial, Household
App-Controlled No

Warranty and Support

This product comes with a 1-Year Warranty from the date of purchase. The warranty covers manufacturing defects and includes free spare parts for covered issues. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the manufacturer's customer service.

User Tips

  • Fresh Beans: Always use fresh, high-quality coffee beans for the best flavor.
  • Grind Adjustment: Experiment with different grind settings to find the perfect extraction for your beans. A finer grind generally produces a stronger espresso.
  • Tamping Consistency: Ensure consistent and even tamping pressure for optimal water flow through the coffee puck.
  • Milk Temperature: For best frothing results, use cold milk. Stop frothing when the milk pitcher becomes too hot to touch.
  • Regular Cleaning: Adhere to the cleaning schedule to prevent buildup and maintain machine performance and hygiene.

Frequently Asked Questions (FAQ)

Q: Why is my espresso flowing too fast?
A: The coffee grounds might be too coarse or not tamped firmly enough. Try a finer grind setting or apply more pressure when tamping.
Q: Why is my espresso flowing too slowly or not at all?
A: The coffee grounds might be too fine or over-tamped, causing excessive resistance. Adjust to a coarser grind or tamp with less force. Also, check if the filter basket is clogged.
Q: How often should I descale the machine?
A: Descaling frequency depends on your water hardness and usage. Generally, every 2-3 months is recommended to prevent mineral buildup and maintain performance.

© 2023 All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.