1. Introduction
This manual provides detailed instructions and specifications for the Estardyn 2.1-inch TFT LCD Display Module, model 2.10 TFT with GC9B72 driver IC. This round screen module features a 360x360 resolution and uses a 4-wire SPI interface, making it suitable for various embedded display applications such as smart wearables, industrial control panels, and custom projects.
Please read this manual thoroughly before operating the module to ensure proper usage and to prevent damage.

Figure 1: Estardyn 2.1-inch TFT LCD Display Module (Front and Back)
2. Specifications
The following table details the technical specifications of the Estardyn 2.1-inch TFT LCD Display Module:
| Feature | Specification |
|---|---|
| Brand Name | Estardyn |
| Model Number | 2.10 TFT |
| Type | TFT LCD |
| Size | 2.10 inch |
| Resolution | 360x360 pixels |
| Display Mode | 360*360 |
| Driver IC | GC9B72 |
| Color | Full Color |
| Interface | 4-wire SPI |
| Supply Voltage | 2.8-3.3V |
| Brightness | 350 cd/m² |
| Operating Temperature (Min) | -20°C |
| Operating Temperature (Max) | +70°C |
| Power Consumption | 300mW |
| Module Dimensions | 55.92 x 57.58 x 2.01 mm |
| Active Area (AA) | 52.92 x 52.92 mm |
| ESD Protection | ±4KV (GB/T17626.2-2018) |
| Certifications | ISO9001/ROHS/CE |
| High-concerned chemical | None |
| Customization | Yes |
| Origin | Mainland China |

Figure 2: Module Dimensions (in mm)
3. Setup and Connection
This section outlines the physical connection and basic setup for the display module.
3.1 Pin Definition
The module uses a 12-pin interface. Refer to the table below for pin functions:
| PIN | SYMBOL | FUNCTION |
|---|---|---|
| 1 | GND | Power Ground |
| 2 | VCC | Power Supply |
| 3 | SCL | Clock Signal |
| 4 | SDA | Data Signal |
| 5 | RST | Display Reset Pin |
| 6 | CS | Chip Select Signal |
| 7 | DC | Data/Command Selection Pin |
| 8 | TE | Frame Sync |
| 9 | SDO | Data Output Pin |
| 10 | VDD | Digital Power Positive |
| 11 | LED-A | Backlight Anode |
| 12 | LED-K | Backlight Cathode |
3.2 Reference Circuit Diagram
The following diagram illustrates a typical connection between the TFT display module and a Microcontroller Unit (MCU) using the 4-wire SPI interface. Ensure all connections are secure and correctly aligned before applying power.

Figure 3: Reference Circuit Diagram (part of the image also contains product parameters and pin definitions)
Note: The image above also contains the product parameters and pin definitions tables. Focus on the bottom section for the circuit diagram.
- Power Supply: Connect VCC and VDD to a 2.8-3.3V power source. Connect GND to ground.
- SPI Interface: Connect SCL (Clock), SDA (Data), CS (Chip Select), and DC (Data/Command) to the corresponding SPI pins on your MCU.
- Reset: Connect RST to a GPIO pin on your MCU for software reset control.
- Backlight: LED-A (Anode) and LED-K (Cathode) control the backlight. Typically, LED-A connects to VCC (or a controlled power source) and LED-K to GND (or a PWM-controlled pin for brightness adjustment).
- Frame Sync (TE): This pin provides a synchronization signal, useful for smooth animations and preventing screen tearing. Connect to an interrupt-capable GPIO on your MCU if needed.
- Data Output (SDO): This pin is for data output from the display, often used for reading display status or data.
4. Operating Instructions
Operating the Estardyn TFT LCD module involves initializing the display and sending commands/data via the SPI interface. This typically requires custom firmware on your MCU.
4.1 Initialization Sequence
The GC9B72 driver IC requires a specific initialization sequence after power-up or reset. This sequence involves sending a series of commands and data bytes to configure the display's internal registers, such as display mode, color format, gamma correction, and power settings. Refer to the GC9B72 datasheet for the exact initialization sequence.
4.2 Displaying Graphics
To display images or text:
- Set Address Window: Define the rectangular area on the display where pixels will be written using commands like
CASET(Column Address Set) andRASET(Row Address Set). - Send Pixel Data: After setting the address window, send pixel data (e.g., 16-bit RGB565 format) via the SPI interface. The driver IC will automatically fill the defined area.
- Refresh Rate: The display operates at a certain refresh rate. Using the TE (Frame Sync) pin can help synchronize your MCU's drawing operations with the display's refresh cycle for optimal performance.

Figure 4: Example Display - Weather Interface

Figure 5: Example Display - Smart Factory Monitoring
5. Maintenance
To ensure the longevity and optimal performance of your Estardyn TFT LCD module, follow these maintenance guidelines:
- Handling: Always handle the module by its edges. Avoid touching the display surface or the flexible flat cable (FPC) directly.
- Cleaning: Use a soft, lint-free cloth, slightly dampened with distilled water or an LCD-safe cleaning solution, to gently wipe the display surface. Do not use abrasive cleaners, alcohol, or solvents.
- Storage: Store the module in an anti-static bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- ESD Protection: The module has ±4KV ESD protection. However, always use proper electrostatic discharge (ESD) precautions (e.g., anti-static wrist strap, grounded workstation) when handling the module to prevent damage.
- Environmental Conditions: Operate the module within the specified temperature range of -20°C to +70°C. Avoid exposing it to high humidity or corrosive environments.
6. Troubleshooting
If you encounter issues with your display module, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Blank screen |
|
|
| Garbled or distorted display |
|
|
| Display flickers |
|
|
If the problem persists after trying these steps, consult the GC9B72 datasheet or contact the manufacturer/seller for further assistance.
7. User Tips
Based on common practices for similar display modules, here are some tips for optimal use:
- Software Libraries: Look for existing open-source libraries (e.g., Adafruit GFX, LVGL) that support the GC9B72 driver IC or similar SPI TFT displays. These can significantly speed up development.
- Power Sequencing: Pay attention to the power-up and power-down sequence if specified in the driver IC datasheet. Incorrect sequencing can sometimes lead to display issues or damage.
- SPI Speed: While SPI can be fast, ensure your MCU's SPI clock speed does not exceed the maximum supported by the GC9B72 driver. Start with a lower speed and increase if stable.
- Backlight Control: Use PWM (Pulse Width Modulation) on the LED-K pin to control backlight brightness, which can save power and extend LED life.
- Testing: Before integrating into a final product, thoroughly test the display with various graphics and scenarios to ensure stability and performance.
8. Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. Estardyn aims to provide high-quality products, and support is typically available through the point of purchase.
If you require technical assistance or have questions not covered in this manual, please reach out to the Estardyn customer support or your distributor.