1. Introduction
Thank you for choosing the Kewig K11 Motorcycle Auxiliary LED Fog Light. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new LED fog lights. Please read it carefully before use to ensure optimal performance and longevity of the product.
2. Safety Warnings and Precautions
- Professional Installation Recommended: The installation of K11 motorcycle auxiliary lights involves relevant professional knowledge and needs to be installed by a professional technician. Improper installation may void the free warranty service.
- Chemical Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Avoid Direct Eye Exposure: When the auxiliary light is on, do not look directly at the eyes, as this may cause damage to the eyes.
- Proper Mounting Location: Install the auxiliary light on the body or the protective bar. It is strictly forbidden to install it on the lower part of the shock absorber or on wheel accessories (parts that are not damped by the shock absorber).
- High Temperature Warning: The lamp body will generate high temperature during operation. Do not touch it to prevent burns.
- Controller Placement: Do not wrap the controller or place it near high-temperature sources such as engines or cooling water tanks. Place it in a ventilated area to prevent heat dissipation issues.
- Voltage Compatibility: The auxiliary light is designed for motorcycles with 12-15V DC voltage. Do not use it beyond this range.
- Civilized Use: For safety, please use lights in a civilized manner.
3. Package Contents
Please check the package for the following items:
- Kewig K11 Auxiliary LED Fog Lights (2 units)
- 6th Gen Smart Wiring Harness
- 2nd Gen Backlit Switch
- Metal Quick Disconnect Interface
- Universal Adjustable Brackets
- Mounting Hardware (screws, nuts, washers)
- Anti-slip Rubber Rings (22mm, 25.4mm, 28.6mm)
4. Specifications
| Feature | Specification |
|---|---|
| Model Name | K11 |
| Brand Name | Kewig |
| Product Name | Motorcycle Auxiliary LED Fog Lights |
| Input Voltage | 12-15V DC |
| Single Power | 60W |
| Total Brightness | 6000LM |
| Color Temperature | 6000K (White light), 3000K (Amber light) |
| Material | 6061 Aerospace aluminum alloy |
| Shell Material | CNC Aluminum Alloy |
| Lens | High Borosilicate Glass |
| Waterproof Grade | IP68 |
| Protection System | Intelligent Chip Control Protection |
| Adjustable Range | 360° All-round Adjustment |
| Core Structure | Professional Heat Dissipation Fin |
| Accessory | Exclusive Advanced Strobe Wiring Harness |
| Applicable Vehicles | Motorcycle / ATV / JEEP / SUV / Off-road Vehicle |
| Dimensions (approx.) | 60mm (length) x 41mm (width) x 41mm (height) |
5. Installation
A comprehensive installation video is available to guide you through the process:
5.1 Mounting the Lights
The main body of the lamp has multiple mounting holes (up, down, left, and right) allowing for selection based on different installation angles. The universal bracket offers 360° vertical and horizontal adjustment, and 180° vertical adjustment for precise light positioning.
Installation Tip: Apply screw glue on screw threads before installation. Do not tighten the screws completely until the installation position is adjusted, then tighten securely.
5.2 Handlebar Diameter and Adapters
The mount base is designed for pipe diameters between 18mm and 32mm. Three sizes of anti-slip rubber rings (22mm, 25.4mm, 28.6mm TPU sleeves) are included to ensure a secure fit on various handlebar sizes.
5.3 Wiring Instructions
The lights come with a quick-disconnect wiring harness for convenient installation. Follow the diagram below for proper connection:
- Red cable: Connect to the positive pole of the battery.
- Black cable: Connect to the negative pole of the battery.
- Yellow cable: Connect to ACC (Accessory) power. ACC refers to the 12V-15V wire on the motorcycle that turns on when the key is opened and turns off when the key is closed.
Important: If the original cable is not long enough, please purchase an extension cable. Do not damage the original cable. Ensure all connections are secure.
For additional details and diagrams, a comprehensive user manual in PDF format is available. Please refer to the seller's website for download.
6. Operating Instructions
The Kewig K11 LED Fog Light features a backlit control switch for easy operation. The blue indicator light provides clear status feedback.
6.1 Basic Operation
- Power On/Standby: When the key (ACC) is powered on, the system is in standby mode. The blue indicator light on the switch flashes slowly.
- Low Beam Mode: Click the main switch button once to enter low beam mode. The blue indicator light will be continuously on.
- High Beam Mode: Click the main switch button again to switch to high beam lighting.
- Cycle Modes: Repeated single clicks on the main switch button will cycle continuously between low beam and high beam.
- Standby/Power Off: Long press the main switch button to enter the standby state. Close the key (ACC power off) to shut down the lights, and the switch indicator light will turn off.
6.2 Warning Light Mode
While in the ACC power-on state (including standby), double-click the main switch button to enter the warning light mode. The blue indicator light will flash quickly.
- Switching Warning Modes: In warning light mode, click the main switch button to cycle through three different warning modes: Flashing left and right, Simultaneously flash left and right, Left and right wheel flashing.
- Exit Warning Mode: Double-click the main switch button again to exit beacon mode and return to the previously memorized mode.
6.3 Passing Light Function
When the ACC is powered on (including the standby state), click the dedicated passing light switch to activate the passing light function.
6.4 Light Effects
The Kewig K11 offers dual yellow and white light, allowing you to switch between far and near illumination as needed.
7. Maintenance
- Cleaning the Lens: If there is dirt on the surface of the light lens, clean it promptly. Dirt can affect brightness and heat dissipation, potentially causing irreversible damage to the lens. When cleaning, turn off the auxiliary lamp and wait for the lamp body to return to normal temperature before cleaning with water and scrubbing with a soft cloth. Do not use a high-pressure gun. If necessary, use a neutral detergent. It is strictly forbidden to use acidic or alkaline liquids on any part of the auxiliary lamp.
- Modular Design: The lights feature a modular design for easy disassembly, simplifying after-sales maintenance. You can unplug connectors without cutting wires for inspection or replacement.
8. Troubleshooting
- Lights not turning on:
- Check all wiring connections (Positive, Negative, ACC) for proper contact.
- Ensure the ACC power is active when the motorcycle key is on.
- Verify the fuse in the wiring harness is intact.
- Dim or inconsistent light output:
- Clean the lens surface if dirty, as this can affect brightness and heat dissipation.
- Ensure the lights are receiving the correct 12-15V DC input voltage.
- Overheating:
- Ensure the controller and lamp bodies are placed in a well-ventilated area, away from high-temperature sources.
- Verify there is no obstruction to the heat dissipation fins.
- Switch not responding:
- Check the connection of the switch to the wiring harness.
- Ensure the ACC power is on.
9. User Tips
- Users have reported that the lights fit nicely and provide sufficient light, enhancing visibility.
- Ensure proper installation and adjustment of the brackets to achieve the desired light beam direction for optimal road illumination.
10. Frequently Asked Questions (FAQ)
- Q: Are these lights homologated for European Union (EU) or Spain?
- A: The product description states: "This is the export version and is warranted by an authorized distributor in that country. Versions from other market are not cover by the warranty." Please check local regulations and consult with the seller or an authorized distributor in your region regarding specific homologation requirements.
11. Warranty and Support
11.1 After-sales Service Terms
- One-Year Free Warranty: Within one year from the date of sale, Kewig motorcycle auxiliary lights can enjoy free warranty service if there are quality problems under normal installation and use.
- Warranty Exclusions: The terms of service do not apply to situations involving man-made damage, improper installation and use, self-disassembly, self-modification, damage to the cables provided by the factory, etc.
- Commercial Products Disclaimer: Users need to be aware that commercial products are modified products; their quality and service life will be affected by different installation and use environments. Unless otherwise specified by law, direct, indirect, special, accidental, inevitable loss or damage, as well as disassembly risks and expenses, etc., shall not be held responsible, but shall not be limited by other legal provisions.
- Export Version: This is the export version and is warranted by an authorized distributor in that country. Versions from other markets are not covered by this warranty.
11.2 Contact Support
If you have any questions about the item you received, please feel free to contact us. Our after-sales team will give you the fastest reply within 24 hours.