BENETECH GM505

Contents

BENETECH GM505 Digital Pressure Manometer User Manual

Model: GM505

1. Introduction

The BENETECH GM505 is a high-precision handheld digital pressure manometer designed for measuring differential pressure. It features multiple selectable units, data hold, record functions, and a backlight for easy reading in various conditions. This manual provides instructions for the safe and effective operation and maintenance of your GM505 manometer.

Front view of BENETECH GM505 Digital Pressure Manometer

Figure 1: Front view of the BENETECH GM505 Digital Pressure Manometer, showing the LCD display and control buttons.

2. Package Contents

Before first use, please check the package contents to ensure all items are present and undamaged:

  • BENETECH GM505 Digital Pressure Manometer
  • Soft tubes (2 pieces)
  • USB cable
  • Software CD
  • AAA batteries (4 pieces)
  • User Manual (this document)
Contents of the BENETECH GM505 package

Figure 2: Contents of the GM505 package, including the manometer, tubes, USB cable, software CD, batteries, and manual.

3. Setup

3.1 Battery Installation

  1. Locate the battery compartment on the back of the device.
  2. Slide the battery cover open.
  3. Insert four (4) AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.
Back view of BENETECH GM505 showing battery compartment

Figure 3: Rear view of the GM505, showing the battery compartment cover.

3.2 Connecting Pressure Tubes

  1. Identify the two pressure ports located at the top of the manometer. These are typically marked with '+' and '-' or similar indicators.
  2. Connect the provided soft tubes to the pressure ports. Ensure a snug fit to prevent leaks.
  3. Connect the other ends of the tubes to the pressure source you intend to measure. The '+' port is for positive pressure input, and the '-' port is for negative or reference pressure.
Top view of BENETECH GM505 showing pressure ports

Figure 4: Top view of the GM505, illustrating the two pressure input ports.

4. Operating Instructions

4.1 Power On/Off

  • Press the red power button (Ⓞ) to turn the device ON.
  • Press and hold the red power button (Ⓞ) for a few seconds to turn the device OFF.

4.2 Button Functions

The GM505 features several control buttons:

  • DIF: Activates differential pressure measurement mode.
  • UNITS: Cycles through the available measurement units (bar, mbar, Kpa, Kgf/cm², mmHg, cmH₂O, Oz/in², Psi, InHg, InH₂O, hPa, m/s, fpm).
  • HOLD: Freezes the current reading on the display. Press again to release.
  • REC: Enters data recording mode. Press once to start recording, press again to stop. The display will show MAX, MIN, AVG values.
  • Light Bulb Icon (💡): Toggles the backlight ON/OFF for improved visibility in low-light conditions.
  • Power Button (Ⓞ): Turns the device ON/OFF.

4.3 Data Recording and USB Connection

The device can record data and connect to a computer via USB for further analysis using the provided software.

  1. To record data, press the REC button. The device will start logging readings.
  2. To stop recording and view MAX, MIN, AVG values, press REC again.
  3. Connect the manometer to a computer using the supplied USB cable. The USB port is located on the side of the device.
  4. Install the software from the provided CD onto your computer.
  5. Follow the software instructions to download and analyze the recorded data.
Side view of BENETECH GM505 showing USB port

Figure 5: Side view of the GM505, highlighting the USB data port.

5. Maintenance

5.1 Cleaning

  • Wipe the device with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the casing or display.
  • Ensure no liquids enter the pressure ports or USB port.

5.2 Storage

  • When not in use for extended periods, remove the batteries to prevent leakage and damage to the device.
  • Store the manometer in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep the pressure ports free from dust and debris.

5.3 Battery Replacement

Replace batteries when the low battery indicator appears on the display. Refer to Section 3.1 for battery installation instructions.

6. Troubleshooting

ProblemPossible CauseSolution
Device does not power onDead or incorrectly installed batteriesCheck battery polarity, replace with fresh batteries.
Display shows "err1"Over positive pressure detectedReduce the input pressure to within the specified measurement range.
Display shows "err2"Over negative pressure detectedReduce the input pressure to within the specified measurement range.
Low battery indicator appearsBatteries are lowReplace all four AAA batteries.
Inaccurate readingsLoose tube connections, sensor contamination, or device malfunctionEnsure tubes are securely connected. Clean ports if necessary. If problem persists, contact support.

7. Specifications

ParameterValue (GM505)
Measurement Range±2490Pa
Accuracy±0.3%
Response Time0.5s
Repeatability±0.3%
Temperature CompensationYes
Soft Tube DimensionsOuter Ø2mm, Inner Ø1mm
Selectable Units11 types
Differential MeasurementYes
Max/Min Value DisplayYes
Over Positive Pressure Indication"err1"
Over Negative Pressure Indication"err2"
Low Battery IndicatorYes
High Definition BacklightYes
Data Lock (Hold)Yes
USB Software SupportYes
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-10°C to 60°C (14°F to 140°F)
Power Supply4 x AAA batteries
Product PackagingColor box
Comparison table of BENETECH manometers including GM505 specifications

Figure 6: Specification comparison table for BENETECH manometers, with GM505 details in the first column.

8. User Tips

  • For consistent readings, allow the device to stabilize at the ambient temperature before taking measurements.
  • Always ensure pressure tubes are free from kinks or blockages, which can affect accuracy.
  • When using the USB connection, ensure the software is correctly installed and the device drivers are recognized by your computer.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.