1. Product Warnings / Safety Information
Electrical Safety Warning
WARNING: Risk of electric shock.
Do not touch exposed circuits, pins or solder joints during operation. Ensure the power supply matches the rated voltage (DC 3.3V-5V, refer to the nameplate for details). Disconnect power before wiring or maintenance.
Electrostatic Discharge (ESD) Warning
CAUTION: This product is electrostatically sensitive.
Handle with an anti-static wristband or on an anti-static mat. Avoid contact with static sources (such as plastic, woolen fabrics) to prevent component damage.
Environmental Safety Warning
WARNING: Keep away from flammable, explosive, corrosive substances and water.
Do not use in high temperature (exceeding 40°C), high humidity (exceeding 80%) or dusty environments.
Operational Safety Warning
DANGER: Incorrect wiring or overloading may cause fire, permanent damage to the product or personal injury.
Do not modify the circuit layout, replace chips or alter firmware without authorization.
Usage Restrictions
- For R&D, prototyping, and educational purposes only. Not designed or certified for critical applications including but not limited to medical devices, life-support systems, industrial control core equipment, automotive safety components, aerospace devices, or power grid infrastructure.
- Prohibited for use by minors under 16 years of age without direct supervision of personnel with professional electronic circuit knowledge and experience.
- Do not operate at full load continuously for more than 8 hours. Allow intermittent cooling periods (at least 30 minutes after 8 hours of continuous use) to prevent component overheating and aging.
- Unauthorized modification, disassembly, repair, or reassembly of the product will void EU compliance certifications (CE, RoHS) and product warranty. Any damage caused by non-compliant operations shall be the sole responsibility of the user.
- Not suitable for outdoor use or harsh environments such as strong electromagnetic interference (EMI), extreme temperature fluctuations (-10°C below zero or 60°C above), or high-altitude low-pressure conditions.
- Do not use the product in conjunction with non-compliant power supplies or accessories that fail to meet EU LVD (Low Voltage Directive) requirements.
WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAY PENS. THIS BAG IS NOT A TOY.
For a complete list of warnings and safety information, please refer to the full user manual PDF: View User Manual (PDF)
2. Product Overview
The LILYGO T-A7670G/E/SA ESP32-S3 Module is a versatile development board designed for wireless communication applications, integrating an ESP32-S3 microcontroller with various SIM communication modules (LTE, GSM, Cat-M, Cat-NB) and optional GPS/GNSS functionality. It features a 18650 battery holder for portable projects and a camera slot for imaging applications.
Product Dimensions

3. Setup Guide
3.1 Package Contents
The package contents may vary slightly depending on the specific model purchased. Below are examples of typical kit components:


3.2 Pinout Diagrams
Refer to the specific pinout diagram for your module version for correct wiring and connections. These diagrams illustrate the GPIO assignments, power pins, communication interfaces (UART, I2C), and module-specific connections like SIM card, TF card, camera, and antennas.




3.3 Initial Connection
- Insert SIM Card: Carefully insert your 1.8V or 3.0V SIM card into the designated SIM card slot. Ensure correct orientation.
- Insert TF Card (Optional): If using, insert a TF card into the TF card slot.
- Connect Antennas: Attach the LTE antenna and, if applicable, the GPS antenna to their respective U.FL connectors on the board.
- Power Supply: Connect a DC 3.3V-5V power supply via the USB-C port or the battery holder. If using the 18650 battery holder, ensure the battery is inserted with correct polarity.
- Connect to PC: Use a USB-C cable to connect the module to your computer for programming and serial communication.
4. Operating Instructions
4.1 Development Environment
The LILYGO T-A7670G/E/SA modules are based on the ESP32-S3 microcontroller. You can develop firmware using the ESP-IDF framework or Arduino IDE with ESP32 board support. Refer to the official Espressif documentation for setting up your development environment.
4.2 Communication Modules
Each variant of the LILYGO T-A7670G/E/SA series integrates a specific SIM communication module (e.g., SIM7080G, A7670E, A7670G, SIM7600G-H) providing different cellular capabilities (LTE Cat-M1, Cat-NB, LTE FDD/TDD, GSM 2G). These modules are controlled via AT commands sent over a UART interface from the ESP32-S3.
4.3 GNSS Functionality
Models with GPS/GNSS support (e.g., T-SIM7080G, T-A7670G, T-A7670SA with GPS) can acquire location data. Ensure the GPS antenna is connected and has a clear view of the sky for optimal performance.
4.4 Camera Interface
The module includes an optional camera slot. A compatible camera module (sold separately) can be connected to enable imaging capabilities, controlled by the ESP32-S3.
4.5 Battery Operation
The integrated 18650 battery holder allows for standalone, portable operation. The board includes charging circuitry for the 18650 battery when powered via USB-C.
5. Maintenance
- Cleaning: Keep the board clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
- Storage: Store the module in a dry, anti-static environment, away from extreme temperatures and humidity.
- Handling: Always handle the board by its edges to minimize the risk of electrostatic discharge.
- No Modifications: Do not attempt unauthorized modifications, repairs, or disassembly, as this will void the product warranty and may cause damage.
6. Troubleshooting
- No Power: Ensure the power supply is within the rated DC 3.3V-5V range and correctly connected. Check battery polarity if using an 18650 battery.
- Module Not Responding: Verify USB-C connection to your PC. Check serial port settings (baud rate, etc.). Ensure the correct firmware is loaded.
- Cellular Network Issues: Confirm SIM card is correctly inserted and activated. Check antenna connection. Verify frequency band compatibility for your region (refer to specifications).
- GPS Not Acquiring Fix: Ensure GPS antenna is connected and has an unobstructed view of the sky. Allow sufficient time for initial satellite acquisition.
- Overheating: If the module becomes excessively hot, ensure it is not operating at full load continuously for more than 8 hours. Allow cooling periods.
- Firmware Upload Failure: Check USB drivers, cable, and development environment settings. Ensure the board is in bootloader mode if required by your programming method.
7. Specifications
7.1 General ESP32-S3 Specifications
| Feature | Specification |
|---|---|
| MCU | ESP32-S3 |
| Clock Speed | 240MHz |
| Flash | 16MB (Quad-SPI) |
| PSRAM | 2MB (Quad-SPI) or 8MB (depending on module) |
| Wireless Connectivity | 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE), Bluetooth Mesh |
| Peripheral Interfaces | I2C, SPI, UART, SDIO, I2S, CAN |
7.2 Communication Module Specifications
The LILYGO T-A7670G/E/SA series supports various communication modules. Below are detailed specifications for common variants:







8. User Tips
- Start Simple: Begin with basic examples provided in the official documentation or GitHub repository to familiarize yourself with the module's functionalities before attempting complex projects.
- Power Management: When running on battery, monitor power consumption, especially with cellular and GPS active, to optimize battery life.
- Antenna Placement: For optimal cellular and GPS performance, ensure antennas are placed in an open area, away from obstructions and other electronic components that might cause interference.
- Firmware Updates: Regularly check the official GitHub repository for firmware updates and new examples to leverage the latest features and bug fixes.
9. Frequently Asked Questions (FAQ)
- Q: What is the recommended power supply voltage?
- A: The module operates on a DC 3.3V-5V power supply. Ensure your power source provides stable voltage within this range.
- Q: Does the module support GPS?
- A: GPS/GNSS support depends on the specific variant. Models like T-SIM7080G, T-A7670G, and T-A7670SA (with GPS) include GNSS functionality. Refer to the specifications table for your model.
- Q: Where can I find programming examples and documentation?
- A: Official documentation, examples, and libraries are typically available on the LILYGO GitHub repository. A good starting point is: https://github.com/Xinyuan-LilyGO/LilyGo-Modem-Series/
- Q: Can I use any SIM card with this module?
- A: The module supports 1.8V/3.0V SIM cards. Ensure your SIM card is compatible with the cellular bands supported by your specific module variant and your local network provider.
10. Warranty and Support
Unauthorized modification, disassembly, repair, or reassembly of the product will void any applicable EU compliance certifications (CE, RoHS) and product warranty. Any damage caused by non-compliant operations shall be the sole responsibility of the user.
For technical support, documentation, and community resources, please visit the official LILYGO GitHub repository:
https://github.com/Xinyuan-LilyGO/LilyGo-Modem-Series/
For further assistance, please contact your seller or the manufacturer directly.