1. Introduction
Thank you for choosing the HITBOX HB-001 Auto Darkening Welding Helmet. This helmet is designed to provide superior eye and face protection during various welding and cutting operations. Featuring advanced True Color Technology, fast darkening, and robust construction, it ensures both safety and comfort. Please read this manual carefully before installation and operation to ensure proper use and maintenance.
2. Safety Information
WARNING: Welding and cutting processes can be hazardous and may cause serious injury or death. Always follow safety precautions and wear appropriate personal protective equipment.
- Always wear the welding helmet during welding, grinding, and cutting operations to protect your eyes and face from harmful UV/IR radiation, sparks, and spatter.
- Ensure the helmet is properly adjusted to fit your head securely before use.
- Do not use the helmet if the auto-darkening filter is damaged or not functioning correctly.
- Replace the front cover lens regularly if it becomes scratched or damaged.
- Keep the helmet clean and free from dirt, dust, and moisture.
- This helmet provides continuous passive UV/IR protection up to DIN 16, even in the light state.
3. Product Overview
The HITBOX HB-001 welding helmet is constructed from durable PP material, offering lightweight, shock-resistant, corrosion-resistant, and flame-resistant properties. It features a high-definition LCD dimming screen with True Color Technology for enhanced visibility.
Key Features:
- True Color Technology: DIN4/9-13 HD LCD Dimming Screen for clear vision.
- Fast Darkening: Switches from light to dark in 1/30000s.
- Anti-strong Arc Light: Protects eyes from intense arc light.
- Optical Class: 1/1/1/1 for superior optical clarity.
- Durable Material: PP construction for enhanced protection.
- Dual Power Supply: Solar power and replaceable CR2450 lithium battery.
- Adjustable Design: Multi-point headgear adjustments for a comfortable and secure fit.
Components:
- Auto-Darkening Filter (ADF): Model LY500A (or LY500B/LY500BS/LY500H/LY500F variants).
- Sensitivity Control: Stepless adjustment for arc detection.
- Delay Control: Stepless adjustment for dark-to-light state transition (0.1-1.0s).
- Shade Control: Adjustable from DIN 9-13 for welding, DIN 4 for grinding, and DIN 5-9 for cutting.
- UV/IR Filter: Provides continuous protection.
- Arc Sensors: Two independent arc sensors for reliable darkening.
- Solar Panel: Charges the internal battery and powers the ADF.
- Headgear: Features a comfort cushion, adjustable top strap, angel knob, and width knob for a customized fit.

Figure 1: Helmet Durability Features

Figure 2: True Color Technology and Optical Features

Figure 3: Auto-Darkening Filter Controls and Dimensions

Figure 4: Adjustable Headgear Design

Figure 5: Headgear Adjustment Points
Video 1: HITBOX HB-001 Welding Helmet Unboxing and Overview
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | HB-001 |
| Brand Name | HITBOX |
| Helmet Material | PP |
| Power Supply | Li-battery & Solar |
| Power Source | CR2450 (replaceable) |
| Auto-Darkening | Yes |
| Solar Powered | Yes |
| View Area | 3.64" x 1.77" (9.25cm x 4.5cm) |
| Switching Time | 1/30000s |
| Light Shade | DIN 4 |
| Dark Shade | DIN 9-13 (Stepless Shift) |
| Sensitivity Adjustment | Stepless Control |
| Delay Time | 0.1-1.0s |
| UV/IR Protection | DIN 16 (passive, continuous) |
| Rated Capacity of Lithium Battery | 600mAh |
| Operating Temperature | -5°C to +55°C |
| Grind Mode | Yes (DIN 4) |
| Cut Mode | Yes (DIN 5-9) |
| Weld Mode | Yes (DIN 9-13) |
| Certifications | CE, FCC, RoHS, ANSI Z87.1, EN379 CE, CSA Z94.3 |
5. Setup
5.1 Headgear Adjustment
Proper adjustment of the headgear is crucial for comfort and safety. The HB-001 features multiple adjustment points:
- Top Strap Adjustment: Adjust the strap over the top of your head to ensure the helmet sits at the correct height.
- Width Knob: Rotate the width knob at the back of the headgear to tighten or loosen the fit around your head.
- Angel Knob: Adjust the angle of the helmet relative to your face. The adjustable knob allows for a 150° rotation without removing the helmet.
- Comfort Cushion: Ensure the comfort cushion is positioned correctly for optimal comfort and sweat absorption.

Figure 6: Helmet Angle Adjustment
5.2 Initial Inspection and Battery
- Before first use, carefully inspect the helmet for any damage.
- Remove any protective film from the auto-darkening filter (ADF) lens.
- The helmet is powered by solar cells and a replaceable CR2450 lithium battery. Ensure the battery is correctly installed. The solar panel helps extend battery life.
6. Operating Instructions
The HB-001 helmet offers versatile settings for different welding and cutting applications.
6.1 Mode Selection and Shade Adjustment
- Weld Mode (DIN 9-13): Use for most welding processes (MIG, TIG, STICK). Adjust the shade control knob to the desired darkness level between DIN 9 and DIN 13.
- Grind Mode (DIN 4): For grinding operations, set the helmet to Grind Mode. The lens will remain in a light shade of DIN 4.
- Cut Mode (DIN 5-9): For cutting applications, adjust the shade control knob between DIN 5 and DIN 9.

Figure 7: Operating Modes and Shade Levels
6.2 Sensitivity Control
The sensitivity control knob adjusts how easily the ADF detects the welding arc. Turn the knob to 'LO' for less sensitivity (e.g., when welding near other welders) or to 'HI' for higher sensitivity (e.g., for low amperage TIG welding).
6.3 Delay Control
The delay control knob determines how long the lens remains dark after the welding arc stops. A shorter delay (0.1s) is suitable for tack welding, while a longer delay (1.0s) helps protect eyes from afterglow and reduces eye strain during prolonged welding.

Figure 8: Fast Darkening and Control Settings
6.4 Recommended Settings for Welding Processes

Figure 9: Recommended Settings for Various Welding Processes
- MIG Welding: Recommended Shade: DIN 10-13, Recommended Delay: 0.1-0.25s (Light) to 0.85-1.0s (Heavy).
- STICK Welding: Recommended Shade: DIN 9-13, Recommended Delay: 0.1-0.25s.
- TIG Welding: Recommended Shade: DIN 9-13, Recommended Delay: 0.1-0.25s.
- CUT (Plasma Cutting): Recommended Shade: DIN 5-9, Recommended Delay: None.
7. Maintenance
7.1 Cleaning
- Clean the helmet shell with mild soap and water. Avoid harsh solvents.
- Clean the outer and inner cover lenses with a soft, clean cloth. Do not use abrasive cleaners.
- Clean the auto-darkening filter (ADF) surface gently with a soft, lint-free cloth. Do not immerse the ADF in water or cleaning solutions.
7.2 Battery Replacement
The HB-001 uses a replaceable CR2450 lithium battery. If the ADF fails to darken or shows signs of low power, replace the battery. Refer to the detailed user manual (PDF) for specific instructions on accessing and replacing the battery compartment.
7.3 Storage
Store the helmet in a dry, clean environment away from direct sunlight and extreme temperatures. Protect the ADF from scratches and impacts.
8. Troubleshooting
- Lens not darkening: Check battery level, ensure solar panel is exposed to light, verify sensitivity setting, and inspect for damage to the ADF.
- Poor visibility: Clean the cover lenses and ADF. Ensure the shade setting is appropriate for the task.
- Helmet slipping: Re-adjust the headgear straps and knobs for a snug fit.
9. User Tips
- Many users appreciate the instant darkening feature, noting that the helmet darkens immediately upon arc creation, providing excellent protection.
- Take time to fine-tune the sensitivity and delay settings for your specific welding process and environment to optimize performance and comfort.
- Regularly check and clean the cover lenses to maintain clear vision and ensure the ADF functions correctly.
10. Warranty and Support
For detailed warranty information, technical support, or to access the full user manual in PDF format, please refer to the official product page or contact HITBOX customer service. A comprehensive user manual (PDF) is available for download, which includes additional details on installation, operation, and maintenance. You can find a link to the PDF manual on the product's item guides & documents section.