Introduction
Thank you for choosing the Haier HFL-LG1822 Indoor Air Conditioner Fan. This appliance is designed to provide a comfortable indoor environment through its multi-functional capabilities, including cooling, humidification, and air circulation. Please read this manual thoroughly before use to ensure proper operation, maintenance, and safety.

Product Features
- Three-in-One Functionality: Operates as a fan, humidifier, or air cooler with ice crystals.
- Energy Efficient: Low power consumption of 60W.
- Large Water Tank: 6-liter capacity for extended cooling and humidification.
- Wide-Angle Air Supply: 80° manual vertical adjustment and 52° automatic horizontal swing.
- Multiple Wind Modes: Normal, Natural, and Sleep modes.
- Timer Function: Up to 7 hours.
- Negative Ion Purification: Helps to refresh indoor air.
- Double-Layer Filtration: Built-in filters to block dust particles.
- Portable Design: Equipped with universal wheels for easy movement.
- Control Options: Available with Mechanical Control or Remote Control.


Setup
- Unpacking: Carefully remove the unit from its packaging. Retain packaging materials for future storage or transport.
- Placement: Place the air conditioner fan on a flat, stable surface. Ensure there is adequate space around the unit for proper airflow, ideally away from walls or furniture that might obstruct air intake or output. The unit is equipped with universal wheels for easy positioning.
- Water Tank Preparation:
- Pull out the water tank from the bottom rear of the unit.
- Fill the water tank with clean water up to the "MAX" line. Do not overfill. The tank has a visible water window to monitor the water level.
- For enhanced cooling, place the provided ice crystals in a freezer for 3-5 hours until frozen. Once frozen, place them into the water tank along with the water. These ice crystals can be reused.

The 6000ml large capacity water tank, showing ice crystals for long-lasting cooling. 
Step-by-step guide for using ice crystals: 1) Freeze for 3-5 hours, 2) Place in water tank with water, 3) Reuse. - Power Connection: Plug the power cord into a suitable 220V~50Hz power outlet.
Operating Instructions
The unit features either a smart touch control panel or mechanical controls, depending on your model. A remote control is also available for certain versions.


Control Panel Functions:
- Power Button: Press to turn the unit ON or OFF.
- Wind Speed (Fan Speed) Button: Cycle through 3 available wind speeds (low, medium, high).
- Wind Mode Button: Select between Normal, Natural, and Sleep wind modes.
- Normal Mode: Consistent airflow.
- Natural Mode: Simulates natural breeze with varying fan speeds.
- Sleep Mode: Operates quietly with reduced fan speed for undisturbed sleep.
- Swing Button: Activates or deactivates the automatic 52° horizontal swing function. The vertical airflow can be manually adjusted up to 80°.

Wide-angle air supply capabilities: 80° manual up/down adjustment and 52° automatic left/right swing. - Cooling/Humidification Button: Activates the water pump to circulate water through the evaporative cooling pad, providing cooling and humidification. Ensure the water tank is filled.
- Negative Ion Button: Activates the negative ion generator to purify and freshen the air.
- Timer Button: Set the operating time up to 7 hours. The unit will automatically turn off after the set time.
Remote Control (if applicable):
Point the remote control towards the unit's receiver and press the desired function buttons. Ensure batteries are correctly installed.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air conditioner fan.
- Before Cleaning: Always unplug the unit from the power outlet before performing any cleaning or maintenance.
- Water Tank Cleaning:
- Empty any remaining water from the tank.
- Clean the water tank regularly with a soft cloth and mild detergent. Rinse thoroughly with clean water.
- Ensure the tank is completely dry before reinserting or refilling.
- Evaporative Cooling Pad (Water Curtain) and Dust Filter Cleaning:
- The unit features a thickened water curtain and a double-layer dust filter.
- Carefully remove the cooling pad and dust filter from the back of the unit.
- Rinse them under running water to remove dust and mineral deposits. For stubborn dirt, use a soft brush.
- Allow them to air dry completely before reinserting.

The thickened plant fiber evaporative cooling pad, designed for enhanced water absorption and cooling performance. 
Internal view of the evaporative cooling pad and dust filter, illustrating air purification and cooling. - Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the unit for an extended period, ensure the water tank, cooling pad, and filters are clean and dry. Store in a cool, dry place.
Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; power cord not properly plugged in. | Check power connection and wall outlet. |
| Weak airflow. | Dust filter or cooling pad is dirty; fan speed is too low. | Clean the dust filter and cooling pad. Increase fan speed. |
| No mist/humidification. | Water tank is empty; water pump is not working. | Fill the water tank. Ensure the cooling/humidification function is activated. |
| Unit is noisy. | Unit not on a flat surface; foreign object in fan. | Place on a flat surface. Turn off and check for obstructions. |
| Remote control not working. | Batteries are dead or incorrectly inserted; obstruction between remote and unit. | Replace batteries. Ensure clear line of sight to the unit's receiver. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model | HFL-LG1822R |
| Type | Air Conditioner Fan |
| Rated Voltage | 220V~50Hz |
| Rated Power | 60W |
| Air Volume | 296.4m³/h |
| Wind Speed Settings | 3 gears |
| Max Wind Speed | 9.5m/s |
| Wind Modes | Normal, Natural, Sleep |
| Timing Function | 7 hours |
| Product Net Weight | 6kg |
| Water Tank Capacity | ≤6L |
| Ice Crystal Standard | 4 units included |
| Product Dimensions (L x W x H) | 305mm x 300mm x 730mm |


User Tips
- For maximum cooling effect, always use the unit with a full water tank and frozen ice crystals.
- Utilize the "Natural" wind mode for a more comfortable, less direct airflow experience, mimicking a gentle breeze.
- The "Sleep" mode is ideal for nighttime use, providing quiet operation and a soft breeze to help maintain a comfortable sleeping environment.
- Regularly check the water level using the visible water window to ensure continuous humidification and cooling.
- Take advantage of the 7-hour timer to conserve energy, especially when using the unit overnight or when you expect to leave the room.
- Position the unit strategically to benefit from its wide-angle air supply, ensuring cool air reaches a larger area.
- The negative ion function can be used to improve air quality, especially in enclosed spaces.


Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.