1. Introduction
The GuliKit NS69 TT Max Wireless Controller is a versatile gamepad designed for an enhanced gaming experience across multiple platforms including Nintendo Switch, PC, Android, and iOS. Featuring advanced TMR Joysticks, customizable RGB lighting, and innovative Auto Pilot Gaming (APG) functionality, this controller offers precision, responsiveness, and personalized control.
2. Package Contents
Please check the box for the following items:
- GuliKit NS69 TT Max Wireless Controller
- USB-C to USB-A Data Cable
- Multifunction Hyperlink 2 Adapter
- Stick Cap Kit (3 different heights)
- Swappable D-pad (2 different types)
- 4 Metal Rear Paddles

Image: GuliKit NS69 TT Max Controller and included accessories.
3. Product Overview
Familiarize yourself with the controller's layout and functions:

Image: Front view of the controller.

Image: Back view of the controller showing G-buttons.
Key Components:
- Controller Mode Indicator Light: Shows current connection mode.
- Controller Battery Indicator Light: Displays battery status.
- USB-C Port: For charging and wired connection.
- Mode Button: Double-click to switch modes (PC, NS, Android/iOS). Long press to power off, click to power on.
- Pairing Button: Long press for over 2 seconds to initiate pairing.
- APG Button: Activates Auto Pilot Gaming functions.
- Settings Button: Used in combination with other buttons for advanced settings.
- ZL/ZR Buttons: Triggers with switchable modes.
- L/R Buttons: Shoulder buttons.
- X, Y, A, B Buttons: Standard action buttons.
- D-pad: Directional pad, swappable.
- Joysticks (L3/R3): Pressable joysticks for movement and additional input.
- G1, G2, G3, G4 Back Buttons: Customizable rear paddles.
4. Setup
4.1 Initial Power On/Off
- Short press the Mode or Home button to power on.
- Long press the Mode button to power off.
- The controller will automatically power off after 15 minutes of inactivity.
- When connected via USB or Auto-Continuous Fire (Turbo) is active, the controller will not power off.
4.2 Joysticks Calibration
To ensure optimal joystick performance, perform calibration if you notice any drift or inaccuracy:
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "A" buttons simultaneously for 6 seconds to enter calibration mode.
- During calibration, rotate both the left and right joysticks in full circles 2 to 3 times.
- Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.
4.3 PC Gyroscope Calibration
If you experience issues with gyroscope functionality on PC:
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "A" buttons simultaneously to initiate automatic gyroscope calibration.
- Once calibration is complete, the controller will vibrate once to indicate success.
Note: Calibration is not necessary when the gyroscope is functioning normally.
4.4 Pairing Methods
4.4.1 PC Bluetooth Pairing (730Hz Polling Rate)
Requires your computer to have Bluetooth functionality.
- Switch the controller to PC mode. Then press and hold the pairing button for 2 seconds until the indicator light begins flashing rapidly, indicating that pairing mode has started.
- On your computer, open the Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once the interface displays "Connected", the pairing is complete.
4.4.2 PC Wired Connection (1000Hz Polling Rate)
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller, and insert the other end into a USB-A port on your computer.
Recommendation: If you're using a desktop computer, it is recommended to use one of the USB ports on the back of the computer case for a more stable connection.
4.4.3 Wireless Pairing Android, iOS, macOS Devices
- Switch the controller to the corresponding mode.
- Press and hold the pairing button for 2 seconds until the indicator light starts blinking quickly, indicating that pairing mode has been activated.
- On your phone/device, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface displays "Connected" to the new controller, indicating that the pairing is complete.
4.4.4 Switch/Switch2 Pairing Methods
- Set the controller to NS mode, turn it on, then press and hold the pairing button for 2 seconds. The indicator light will blink quickly, indicating that pairing has started.
- When the Switch / Switch 2 is in sleep mode (black screen), press the HOME button on a Joy-Con to wake it up. It will then enter the controller pairing interface.
- Once the interface shows that a new controller is connected, the pairing is complete.
5. Operating Instructions
5.1 Auto Pilot Gaming (APG) Function
The APG function allows you to record and replay complex button sequences.
- To Record: Long press the APG button for 3 seconds (short vibration). Perform your desired controller actions. Press the APG button again to end recording (long vibration).
- Single Playback: Short press the APG button.
- Repeat Playback: Double-click the APG button.
- During replay, you can use the joystick for movement, allowing you to perform actions while moving.
- To cancel the replay midway, press any other button.
- Maximum recording time is 10 minutes.

Image: Auto Pilot Gaming (APG) functionality diagram.
5.2 Back Button Configuration Mapping
The 4 metal rear paddles (G1, G2, G3, G4) can be remapped:
- To Map: Hold the Settings button (short vibration) + desired Back button. Then press the button you want to map.
- To Cancel: Hold the Settings button + desired Back button (long vibration). This cancels the current mapping for that specific back button.
Note: The back buttons can only map to normal key functions and do not support Continuous Fire.

Image: Instructions for single-button mapping of rear paddles.
5.3 Back Button APG Function
The 4 back buttons also support a 30-second APG function:
- To Record: Hold the APG button + desired Back button. Perform controller actions. Press the APG button again to end.
- Single Playback: Short press the Back button.
5.4 Trigger Mode Setting Method
The ZL and ZR triggers can switch between digital tactile switch mode and Hall effect analog trigger mode:
- Toggle the physical switch located on the back of the controller for ZL and ZR respectively.
Important: Make sure the triggers are released before switching modes.

Image: Gen 2 Smart Triggers with toggle-able microswitch and Hall Effect modes.
5.5 Special Function Settings (Advanced Controls)
All special function settings require holding down the Settings button while pressing the corresponding buttons for configuration. All special settings will be automatically saved.
- Logo Light Status: White when no special settings are configured. Blue when special settings are configured.
- Low Battery Indication: Logo light flashes, and vibration automatically turns off. Vibration restores when battery level is sufficient.
5.5.1 Clear All Settings (Reset)
Hold Settings button + Mode button for 6 seconds. A long vibration indicates the reset is complete, restoring factory settings.
5.5.2 Joystick Dead Zone Mode
Hold Settings button + D-pad Up for 6 seconds.
- One Vibration: Joystick with dead zone mode.
- Two Vibrations: Anti-Snapback mode (Dead zone ON).
- Long Vibration: Joystick without dead zone mode (Default setting).

Image: Anti-Snapback Joystick Mode settings.
5.5.3 Continuous Fire (Turbo)
Hold Settings button + ZR for 6 seconds.
- One Vibration: Normal Continuous Fire (active when button is held, stops when released).
- Two Vibrations: Auto Continuous Fire (press once to start, press again to stop).
- Long Vibration: Cancel Continuous Fire.
5.5.4 A-B X-Y Swap
Hold Settings button + A button for 6 seconds.
- One Vibration: Swaps input values of the A-B and X-Y buttons.
- Long Vibration: Restores the default button assignments.
5.5.5 Vibration Intensity Adjustment
Hold Settings button + D-pad Right for 6 seconds.
- One Vibration: Weak vibration.
- Two Vibrations: Standard vibration (Default setting).
- Three Vibrations: Strong vibration.
- Long Vibration: Turn off vibration.
5.5.6 Vibration Mode Adjustment
Hold Settings button + D-pad Down for 6 seconds.
- One Vibration: Rotary Motor mode.
- Two Vibrations: GuliKit Maglev Haptic mode (PC Default setting).
- Three Vibrations: HD vibration mode (Switch Default setting).

Image: Gen 2 Super Haptic Vibration modes and strengths.
5.5.7 Joystick Sensitivity Adjustment
Hold Settings button + R3/L3 for 6 seconds. (R3 and L3 refer to pressing down on the joysticks. Each joystick can be individually configured.)
- One Vibration: Sensitivity 50%.
- Two Vibrations: Sensitivity 100% (Default setting).
- Three Vibrations: Sensitivity 150%.

Image: Adjustable joystick sensitivity levels.
5.5.8 D-pad 4-direction Mode
Hold Settings button + D-pad Left for 6 seconds.
- One Vibration: The D-pad switches to 4-direction mode.
- Long Vibration: Restores the default 8-direction mode.

Image: Classic Floating D-pad, perfect for fighting games, with two swappable D-pad options.
5.5.9 PC Motion Aim Assist for FPS Games
Hold Settings button + L/ZL for 6 seconds.
- One Vibration: Low sensitivity aim assist.
- Two Vibrations: Medium sensitivity aim assist.
- Three Vibrations: High sensitivity aim assist.
- Long Vibration: Disable motion aim assist (Default mode).
- +L: Set motion assist to activate when the L button is held in-game.
- +ZL: Set motion assist to activate when the ZL trigger is held in-game.
5.5.10 Star Ring Lighting Effects
Hold Settings button + Joystick (any) for 6 seconds to cycle through lighting effects:
- Constant On
- Joystick Tracing Mode
- Rainbow Flowing Light Mode
- Trigger Tracing Mode
- Off

Image: Adjustable Star-Ring RGB Lights and their function setting status.
5.5.11 APG Recording File Share
This feature allows you to manage your APG recordings:
- Enter APG read/write mode.
- Insert the USB data cable into your computer. A USB drive named "GuliKit dat" should appear.
- Open the USB drive to find a file named "Auto.apg", which is your APG recording file. You can copy this file for backup or sharing.
- To overwrite the existing APG file, replace it with a new APG file by copying the desired APG file into the USB drive.
- Once the writing process is complete, the controller will automatically power off. Alternatively, you can hold the Mode button to power off the controller.
- Please avoid changing the file name to ensure proper functionality.
6. Specifications
| Feature | Description |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS69 |
| GuliKit Model | TT Max |
| Type | Gamepads |
| Interface Type | Bluetooth, Type C |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch, Nintendo Switch OLED |
| Joystick Sensor Module | GuliKit (Hall Effect) |
| Trigger Button Type | Hall-Linear |
| D-pad Switch Type | MEMBRANE |
| Bumpers Switch Type | Tactile switch |
| RGB Lighting Joysticks | Yes |
| Hall Effect | Yes |
| Battery Included | Yes |
| Battery Capacity | 950mAh Li-polymer |
| Battery Life (lights off, Turbo on) | 26 hours |
| Battery Life (low lights, Turbo on) | 14 hours |
| Support Software Configuration | No |
| Wired Polling Rate | 1000Hz |
| Bluetooth Polling Rate (TT Controllers) | 730Hz |
| Bluetooth Polling Rate (Other Controllers) | 125-250Hz |
| Wired Button Latency | 2.16ms |
| Bluetooth Button Latency | 2.62ms |
| Wired Joystick Latency | 2.4ms |
| Bluetooth Joystick Latency | 2.72ms |
| Package Dimensions (L x W x H) | 24 cm x 16 cm x 14 cm |
| Package Weight | 0.604 kg |
| Origin | Mainland China |
| Certification | CE |

Image: Hyperlink 2 Fastest Wireless Speed performance metrics.
7. User Tips
- PC FPS Aiming: For optimal performance in PC FPS games, utilize the PC Motion Sense Aiming (MSA) feature. Experiment with the three sensitivity levels to find what suits your playstyle best.
- Joystick Maintenance: If you experience any unexpected joystick behavior, perform the joystick calibration as described in the setup section.
- Battery Conservation: To extend battery life, consider turning off the joystick RGB lights when not needed.
- D-pad Customization: For fighting games or specific preferences, try swapping to the Classic Floating D-pad for more precise input.
8. Troubleshooting
- Controller not powering on: Ensure the battery is charged. Connect via USB-C cable to check if it powers on.
- Pairing issues: Ensure the controller is in the correct mode for your device (PC, NS, Android/iOS). Re-enter pairing mode by long-pressing the pairing button. Check your device's Bluetooth settings and try re-pairing.
- Joystick drift/inaccuracy: Perform the Joystick Calibration procedure as detailed in Section 4.2.
- Gyroscope issues on PC: Perform the PC Gyroscope Calibration procedure as detailed in Section 4.3.
- Buttons not responding: Check if Continuous Fire (Turbo) is accidentally activated for that button. If issues persist, try resetting the controller to factory settings (Section 5.5.1).
- Vibration not working: Check vibration intensity settings (Section 5.5.5). Ensure the controller battery is not critically low, as vibration may be disabled to conserve power.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the controller or exposing it to excessive force, which could damage internal components.
- Disassembly: Do not attempt to disassemble the controller beyond user-serviceable parts (e.g., swappable D-pad, rear paddles) as this may void your warranty.
10. Warranty & Support
For detailed warranty information, product registration, and further technical support, please visit the official GuliKit website:
You may also find additional FAQs and troubleshooting guides on the website's support section.