Kunray 25A Brushless Controller with S966 LCD Display

Contents

Kunray 25A Electric Bike Brushless Controller 500W with LCD Display S966 User Manual

Model: 25A Brushless Controller with S966 LCD Display

Brand: Kunray

1. Introduction

This manual provides essential information for the safe and efficient operation of your Kunray 25A Electric Bike Brushless Controller and S966 LCD Display. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

The controller is designed for 36V/48V e-bikes with a 500W motor. The S966 LCD display offers comprehensive data display and control features.

2. Safety Information

  • Always ensure the power is off before connecting or disconnecting any components.
  • Verify that the voltage of your motor matches the battery voltage to prevent damage.
  • Avoid exposing the controller and display to extreme temperatures or direct water immersion, although some displays are IP65 rated (splash-proof, not submersible).
  • Professional installation is recommended if you are unfamiliar with e-bike wiring.
  • Do not attempt to modify the controller or display, as this may void the warranty and cause malfunction.

3. Package Contents

Your package should contain the following items:

  • 1 x Kunray 25A Brushless DC Motor Controller
  • 1 x S966 LCD Display (or selected display model)
  • Associated wiring harnesses
Kunray 25A Electric Bike Brushless Controller and various LCD displays
Overview of the Kunray 25A Brushless Controller and various compatible LCD displays.

4. Specifications

4.1. 500W Brushless DC Motor Controller

Parameter Value
Rated Power 500W
Rated Voltage 36V/48V
Cutoff Voltage 19/29/39V ±0.5V
Current Output 25A ±1A
Dimensions 125mm x 50mm x 30mm
Weight 350g
Mosfets 9 mosfets
Brake Input Low-level
500W 25A Controller Product Parameters
Detailed product parameters for the 500W 25A controller.
Controller dimensions 125mm x 50mm x 30mm
Physical dimensions of the controller: 125mm length, 50mm width, 30mm height.

4.2. S966 LCD Display Specifications

Parameter Value
Display Type Color LCD
Voltage 24V/36V/48V/52V/60V/72V
Connectivity SM Connector
Features Power display, Speed display, Mileage display, NFC Function
S966 Color LCD Display showing power, speed, and mileage
S966 Color LCD Display highlighting key features.

4.3. Other Compatible Displays (Overview)

The controller is compatible with various displays, each with unique features:

  • S830U Display: 24/36/48V, IP65 waterproof, 210g, 90x54x22mm. Features a USB charging port. Compatible with UART 2 protocol controllers.
  • EN06 Display: 24V-48V, 87g, 60x46x22.2mm, 5pin plug. Features a USB charging port. Compatible with UART 2 protocol controllers.
  • LED G20 Display: 36V/48V, 98.8g, 48x50x22.2mm, 5pin+2pin plug. IP65 rated (not submersible).
  • M9 Display: 24V-72V, 268g, 111x63x22.2mm, 5pin+2pin plug. IP65 rated (not submersible).
  • UKC1 Display: 24-72V, 243g, 5 PIN plug. Features a USB charging port.
  • S866 Display: 24V/36V/48V, 200g, 5Pin Female SM Plug, 1700mm SM Length. Available in monochrome and color versions.
  • S-100 Display: 24V/36V/48V/52V/60V/72V. Clear and beautiful LCD display.
  • H-100 Display: 24V-72V. Color LCD display.
  • S800 LED Display: Features On/Off, Light, and Mode (Low, Med, High) buttons.

Note: For optimal performance, it is recommended to purchase the display and controller together, especially for UART 2 protocol displays like S830U and EN06.

5. Installation

Follow the wiring diagram carefully for proper installation. Ensure all connections are secure before powering on the system.

Wiring diagram for 500W brushless DC motor controller
Wiring diagram for the 500W brushless DC motor controller. Connect Battery, Self Study, PAS sensor, Headlight power, Throttle, Brake, Hall, Display, and Motor phase according to the labels.

5.1. Wiring Connections

  • Battery+-: Connect to your e-bike battery using the XT60 connector.
  • Self Study: Used for initial motor pairing (refer to specific motor instructions if needed).
  • PAS Sensor: Connect to the Pedal Assist System sensor.
  • Headlight Power: Black wire for GND, Yellow wire for power+.
  • Throttle: Connect to the throttle unit.
  • Brake: Connect to the brake levers.
  • Hall: Connect to the motor's Hall sensor wires.
  • Display: Connect to the LCD display unit (SM connector).
  • Motor Phase: Connect the three thick wires to the motor phase wires.

5.2. Display Mounting

Mount the display securely on your handlebar. Ensure it is positioned for easy viewing and access to buttons without obstructing your riding. Most displays are designed for 22.2mm handlebar diameter.

S966 display installation on handlebar
S966 display mounted on a handlebar, showing button operation.

6. Operation

6.1. S966 Display Functions

The S966 display provides various real-time riding data and control options:

  • 1. Battery Display: Shows current battery level.
  • 2. Speed Display: Shows current riding speed.
  • 3. Assist State & Light: Indicates pedal assist level and headlight status.
  • 4. Multifunctional Display: Displays various information like ODO, TRIP, MAX, AVG.
  • 5. Power Assist Status: Shows the current power assist level (GEAR).
  • 6. Vehicle Mode Display: Indicates riding mode (e.g., SPORT, STD, ECO).
S966 display features and button interpretation
Detailed view of S966 display features and button functions.

6.2. Button Operation (S966)

  • Up (+) button: Parameter setting (long press), increase value, change PAS gear (short press).
  • Down (-) button: Parameter setting (long press), decrease value, change PAS gear (short press), Push forward (long press).
  • M (Mode) button: On/Off (long press for 3 seconds), Function selection (short press), M key function mode (long press).

6.3. NFC Function (S966-NFC)

For S966 displays with NFC functionality, you can power on/off and lock the display using close-range wireless sensing:

  • NFC Card: Turn on the power and tap the screen twice with the NFC card to turn it on or off.
  • Password: After turning on the power, press the up or down key briefly and enter the password (e.g., 2023) to open it.
  • Mobile Phone: After copying the card using NFC on your mobile phone, the display panel can be opened through the phone.
S966-NFC open ways: NFC card, password, mobile phone
Methods to activate the S966-NFC display: using an NFC card, a password, or a mobile phone.
Video demonstrating the S966-NFC close-range wireless sensing for power on/off.

6.4. USB Charging Port

Some display models, such as S830U, EN06, and UKC1, are equipped with a USB charging port (5V 500mA) for convenient mobile phone charging during your ride.

S830U display with USB charging port
S830U display featuring a USB charging port for mobile devices.
EN06 display with USB charging port
EN06 display with its integrated USB charging port.
UKC1 display with USB charging port
UKC1 display demonstrating its USB charging capability.

7. Maintenance

  • Keep the controller and display clean and dry. Wipe with a soft, damp cloth.
  • Avoid using harsh chemicals or abrasive cleaners.
  • Regularly check all wiring connections for tightness and signs of wear or damage.
  • Ensure the display screen is free from scratches or cracks that could impair visibility.
  • Store the e-bike in a cool, dry place when not in use.

8. Troubleshooting

8.1. Display Error Codes

If an error occurs, the S966 display may show an "ERROR" message with a code (e.g., "06"). While specific error code meanings are not provided in this manual, common troubleshooting steps include:

  • Check all wiring connections to ensure they are secure and undamaged.
  • Restart the e-bike system by turning it off and on again.
  • Verify battery charge level.
  • If the error persists, contact customer support for assistance.
S966 display showing an error code
The S966 display indicating an error (e.g., ERROR 06).

8.2. General Issues

  • No Power: Check battery connection, battery charge, and main power switch.
  • Motor Not Responding: Check motor phase wires, Hall sensor wires, and throttle connection. Ensure the self-study function has been completed if required.
  • Inaccurate Speed/Mileage: Verify the PAS sensor connection and ensure wheel size settings in the display are correct (if adjustable).

9. User Tips

  • Battery Voltage Match: Always ensure that the voltage of your motor is the same as your battery voltage to prevent damage and ensure compatibility.
  • Display Compatibility: If you are purchasing a display separately, confirm it uses the correct protocol (e.g., UART 2) for your controller. When in doubt, it's best to purchase the display and controller as a matched set.

10. Warranty and Support

The manufacturer provides the following warranty and support:

  • Product Damage/Loss in Transit: If the product is damaged or parts are lost during transit, the manufacturer will take full responsibility.
  • Accessories Warranty: Accessories have a three-month warranty period for quality problems, with free replacement provided.
  • Motor Warranty: The motor has a one-year warranty period.

For any questions or issues, please contact customer service. They will assist you in solving problems and provide necessary support.

© 2023 Kunray. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.