1. Introduction
Thank you for choosing the GuliKit NS68 TT Pro Wireless Game Controller. This advanced controller is designed to provide a superior gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS. It features innovative TMR joysticks with adjustable tension, Gen 2 Smart Triggers, customizable rear paddles, and a patented Auto-Pilot Gaming (APG) functionality. Please read this manual carefully to ensure proper use and to fully enjoy all the features of your new controller.
Video: Unboxing and customization overview of the GuliKit TT Pro controller.
2. Package Contents
Please check the package to ensure all items are present:
- GuliKit TT Pro Wireless Controller (NS68)
- Hyperlink Gen 2 Wireless Controller Adapter
- Interchangeable ABXY Buttons
- Interchangeable Rear Paddles (G1, G2, G3, G4)
- USB-C to USB-A Data Cable
- User Manual (this document)
- Stick Cap Kit (for TT MAX version, may be included with some TT Pro variants)

Image: GuliKit TT Pro controller and included accessories.
3. Product Overview
Familiarize yourself with the main components and controls of your GuliKit TT Pro controller:
- Controller Mode Indicator Light: Displays the current operating mode.
- Controller Battery Indicator Light: Shows battery status.
- USB-C Port: Used for charging and wired connection.
- Mode Button: Double-click to switch modes. Long press to power off, click to power on.
- Pairing Button: Long press for over 2 seconds to initiate pairing.
- APG Button: Used for Auto-Pilot Gaming functionality.
- Settings Button: Used for configuring special functions.
- ABXY Buttons: Standard action buttons, tactile switch type, interchangeable.
- Joysticks: TMR (Hall Effect) joysticks with 720° tension adjustment and RGB lighting.
- D-pad: MEMBRANE type, classic floating design, swappable.
- Rear Paddles (G1, G2, G3, G4): 4 detachable and remappable metal paddles.
- ZL/ZR Triggers: Gen 2 Smart Triggers, toggle-able between Hall effect analog and micro-switch digital modes.
- L/R Bumpers: Tactile switch type.

Image: Top-front view of the GuliKit TT Pro controller.

Image: Back view of the GuliKit TT Pro controller with G1-G4 paddles.
4. Setup and Connection
4.1. Power On/Off
- Power On: Short press the Mode or Home button.
- Power Off: Long press the Mode button.
- Auto Power Off: The controller will automatically power off after 15 minutes of inactivity.
- Note: When connected via USB or if Auto-Continuous Fire (Turbo) is active, the controller will not power off automatically.
4.2. Joystick Calibration
To calibrate the joysticks:
- Ensure the controller is powered on.
- Press and hold the "L," "R," "D-pad Left," and "A" buttons simultaneously for 6 seconds to enter calibration mode.
- Rotate both the left and right joysticks in full circles 2 to 3 times.
- The controller will vibrate once to indicate successful calibration and will automatically exit calibration mode.
4.3. Pairing Methods
4.3.1. PC Connection
Bluetooth Pairing (730Hz Polling Rate):
- Switch the controller to PC mode.
- Press and hold the pairing button for 2 seconds until the indicator light flashes rapidly.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- Once the interface displays "Connected", pairing is complete.
Wired Connection (1000Hz Polling Rate):
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller, and the other end to a USB-A port on your computer.
- For desktop computers, using a rear USB port is recommended for stability.

Image: Hyperlink 2 Wireless Speed: Polling Rate and Latency Comparison.

Image: GPOL test results for wired and Bluetooth latency.
4.3.2. Android, iOS, macOS Devices
- Switch the controller to the corresponding mode for your device.
- Press and hold the pairing button for 2 seconds until the indicator light blinks quickly.
- On your device, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface will display "Connected" once pairing is complete.
4.3.3. Nintendo Switch/Switch 2
- Set the controller to NS mode and power it on.
- Press and hold the pairing button for 2 seconds until the indicator light blinks quickly.
- Wake up your Switch/Switch 2 from sleep mode by pressing the HOME button on a Joy-Con. It will enter the controller pairing interface.
- Once the interface shows a new controller is connected, pairing is complete.
5. Operating Instructions
All special function settings require holding down the Settings button while pressing the corresponding buttons for configuration. All special settings will be automatically saved. The logo light will be white when no special settings are configured, and blue when special settings are active.
5.1. Auto Pilot Gaming (APG) Function
The APG function allows you to record and replay button inputs.
- Record: Long press the APG button for 3 seconds (short vibration). Perform your desired controller actions. Press the APG button again to end recording (long vibration). Maximum recording time is 10 seconds.
- Single Playback: Short press the APG button.
- Repeat Playback: Double-click the APG button.
Note: During replay, you can use the joystick for movement. To cancel replay midway, press any other button.

Image: Patented APG (Auto-Pilot Gaming) Functionality diagram.
5.2. Back Button Configuration Mapping (G1, G2, G3, G4)
- Mapping: Press Settings button + a Back button (short vibration). Then press the button you want to map.
- Cancel: Press Settings button + a Back button (long vibration) to cancel the current mapping.
Note: Back buttons only support normal key functions and do not support Continuous Fire.

Image: 4 Metal Rear Paddles and Single-button Mapping.
5.3. Trigger Mode Setting (ZL/ZR)
Toggle the switch on the back of the controller to switch between:
- Hall effect analog trigger mode (for precise control in racing games)
- Micro-switch digital trigger mode (for ultra-fast response in shooting games)
Note: Ensure triggers are released before switching modes.

Image: Gen 2 Smart Triggers with toggle switch.
5.4. Special Function Settings (Using Settings Button)
- Clear All Settings (Reset): Press Settings button + Y. A long vibration indicates the reset is complete, restoring factory settings.
- Joystick Dead Zone Mode: Press Settings button + A.
- One Vibration: Joystick with dead zone mode.
- Two Vibrations: Anti-Snapback mode (Dead zone ON, low-sampling rate).
- Long Vibration: Joystick without dead zone mode (Default setting, high-sampling rate).
- Continuous Fire (Turbo): Press Settings button + X.
- One Vibration: Normal Continuous Fire (active when button held).
- Two Vibrations: Auto Continuous Fire (press once to start, press again to stop).
- Long Vibration: Cancel Continuous Fire.
- Vibration Intensity Adjustment: Press Settings button + ZR.
- One Vibration: Weak vibration.
- Two Vibrations: Standard vibration (Default setting).
- Three Vibrations: Strong vibration.
- Long Vibration: Turn off vibration.
- Vibration Mode Adjustment: Press Settings button + ZL.
- One Vibration: Rotary Motor mode.
- Two Vibrations: GuliKit Maglev Haptic mode (PC Default setting).
- Three Vibrations: HD vibration mode (Switch Default setting).

Image: Gen 2 Super Haptic Vibration modes.
- Star Ring Lighting Effects: Press Settings button + L. Cycles through: Steady on, Joystick-activated flowing light, Colorful flowing light, Trigger-activated flowing light, Off.
- APG Recording File Share: Press Settings button + R. This enters APG read/write mode. Connect the USB data cable to your computer. A USB drive named "GuliKit dat" will appear. You can copy "Auto.apg" for backup or replace it with a new APG file. The controller will automatically power off after writing, or you can long press the Mode button to power off. Avoid changing the file name.

Image: Adjustable Star-Ring RGB Lights and Joystick Sensitivity.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS68 |
| GuliKit Model | TT PRO |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS |
| Interface Type | Bluetooth, Type C |
| Battery Included | Yes (950mAh Li-polymer) |
| Joystick Sensor Module | GuliKit (Hall Effect, TMR) |
| Trigger Button Type | Hall-Linear (Gen 2 Smart Triggers) |
| D-pad Switch Type | MEMBRANE (Classic Floating, Swappable) |
| ABXY Switch Type | Tactile switch (Gen 2 Unique ABXY Button Switch) |
| Bumpers Switch Type | Tactile switch |
| RGB Lighting Joysticks | Yes (Adjustable Star-Ring RGB Lights) |
| Hall Effect | Yes |
| Vibration | Gen 2 Super Haptic Vibration (HD Rumble, Super Haptic, Rotor; 9 customizable levels) |
| Polling Rate (Wired) | 1000Hz |
| Polling Rate (Bluetooth) | 730Hz (TT Controllers), 125-250Hz (Other Controllers) |
| Latency (Wired Button) | 2.16ms |
| Latency (Bluetooth Button) | 2.62ms |
| Latency (Wired Joystick) | 2.4ms |
| Latency (Bluetooth Joystick) | 2.72ms |
| Package Dimensions | Length 23cm, Width 17cm, Height 12cm |
| Package Weight | 0.591 kg |

Image: 950mAh Li-polymer Battery information.
7. Troubleshooting
- Controller not powering on: Ensure the battery is charged. Connect the controller via USB-C cable to a power source.
- Pairing issues: Make sure the controller is in the correct mode for your device (PC, NS, Android/iOS). Long press the pairing button until the indicator light flashes rapidly. On your device, ensure Bluetooth is enabled and try searching for devices again.
- Connection instability: For wired PC connections, try using a USB port directly on the motherboard (rear ports) for better stability. Ensure no strong 2.4GHz interference if using Bluetooth.
- Joystick drift: Perform joystick calibration as described in section 4.2. If issues persist, try adjusting the Joystick Dead Zone Mode (Section 5.4).
- Buttons unresponsive: Check if Continuous Fire (Turbo) is accidentally activated for that button. Try resetting all settings (Section 5.4).
- Vibration not working: Check vibration intensity and mode settings (Section 5.4). Ensure the battery is not critically low, as vibration may be disabled to conserve power.
- APG recording/playback issues: Ensure recording time does not exceed 10 seconds. If sharing APG files, ensure the file name is not changed.
For more detailed FAQs and support, please visit the official GuliKit website: www.gulikit.com
8. User Tips
- Experiment with the 720° tension adjustable joysticks to find your preferred sensitivity for different game genres.
- Utilize the swappable D-pad for fighting games or other titles where a specific D-pad feel is beneficial.
- Take advantage of the Gen 2 Smart Triggers by switching between analog and digital modes based on the game you're playing (e.g., analog for racing, digital for shooters).
- Customize the rear paddles for quick access to frequently used actions, enhancing your gameplay efficiency.
- The APG function can be useful for automating repetitive tasks or practicing complex combos.
9. Warranty and Support
GuliKit products are designed for quality and reliability. For warranty information, technical support, and further assistance, please refer to the official GuliKit website or contact their customer service directly.
Official Website: www.gulikit.com
CAUTION! This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children.