1. Introduction
The JIKONG Smart BMS (Battery Management System) is an advanced active balance system designed for various lithium battery chemistries, including Li-ion, LiFePO4, and LTO. It supports battery configurations from 8S to 24S and offers continuous discharge currents ranging from 40A to 150A (with specific models supporting up to 200A/300A). This BMS features built-in Bluetooth connectivity for mobile app control, an active balance current of 0.6A, and optional LCD displays (2.3, 3.2, or 4.3 inches) for real-time monitoring.
Key Features:
- Supports Li-ion, LiFePO4, and LTO battery types.
- Built-in Bluetooth for smartphone app (iOS/Android/HarmonyOS) and PC software communication.
- Active Balance Current of 0.6A for efficient cell voltage equalization.
- Supports 8S to 24S battery configurations.
- Continuous discharge current from 40A to 150A (model dependent).
- Optional LCD displays for comprehensive battery status.
- Rich communication interfaces: CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer.
- Comprehensive protection functions: Overcharge, Over-discharge, Overcurrent, Over-temperature, Under-temperature, and Short Circuit.
- Suitable for a wide range of applications including E-bikes, electric tricycles, forklifts, industrial drones, RV energy storage, power banks, and more.

Figure 1: JIKONG Active Balance BMS V20 Version Overview

Figure 2: Wide Range of Application Scenarios
2. Safety Precautions
Failure to follow these safety instructions may result in damage to the BMS, battery, or personal injury.
- Read the Manual: Always read this instruction manual carefully before installation and operation.
- Correct Wiring: Connect the cables strictly from the negative terminal to the positive terminal according to the specific wiring diagram for your battery string count.
- Verify Connections: After connecting the balance wires, use a multimeter to confirm all connections are correct and there are no shorts or open circuits before inserting the protection board.
- Default Passwords: The default connection password for the protection board is