1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Multimedia Touch Screen Linux System Car Radio. This advanced car multimedia player is designed for BMW 5 Series F10 and F11 models from 2011 to 2017, supporting both CIC and NBT original car systems. It features a QLED 1920*720 display, built-in GPS navigation, wireless Carplay and Android Auto, Bluetooth, Wi-Fi, USB connectivity, steering wheel control (SWC) support, Mirror Link, and integration with the original iDrive system and car information display.
Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Video: Demonstration of the MEKEDE Car Radio's user interface, settings, music playback, Bluetooth, Carplay, Miracast, and video playback features.
2. Safety Information and Warnings
For your safety and to prevent damage to the device or vehicle, please observe the following:
- Driving Safety: Do not watch videos or operate the machine while driving. Adjust the volume to a level that allows you to clearly hear outside sounds.
- Operation Location: If you encounter difficulties operating the system, park your car in a safe place before proceeding.
- Children: Do not allow children to operate the machine to avoid personal injury or device damage.
- Navigation: Follow traffic rules when using the satellite navigation function.
- Environment: Do not use the equipment in electronic equipment or open fire prohibited places (e.g., gas stations, wineries, strong electromagnetic interference areas), as this may cause danger.
- Maintenance: Do not attempt to maintain, repair, or install the machine yourself. Installation or repair with power on is dangerous. Consult a professional car audio shop for assistance.
- Installation Location: Avoid installing or storing the machine in direct sunlight. Do not place it near hazardous substances. If the LCD screen is near air conditioning vents, ensure cool and hot air do not blow directly onto the machine, as this may cause damage.
- Display Screen Care: Do not scratch the display screen with sharp objects, and do not press it vigorously with hard objects, as this may damage the screen or touch screen.
- Power System: This machine is suitable for a car 12V power system (must have a grounding wire). Do not install this equipment in a 24V car, as it will damage the machine.
- Fuse: Do not replace the power fuse without professional guidance. Improper use can cause damage or fire.
- Short Circuit Prevention: To prevent short circuits, always turn off the car and disconnect the connection between ACC and B+ before installation.
Note: Due to continuous improvement of product functions, this manual is for reference only.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Linux |
| Chipset | T113 (Dual-core Cortex-A7) |
| RAM | 256Mb |
| Display Size | 10.25 Inch |
| Resolution | 1920*720 QLED |
| Touch Screen | Yes, Capacitive screen |
| Built-in Screen | Yes |
| Out Power | 4*45W |
| Voltage | 12 V (Operating range: 9V~16V) |
| Maximum Working Current | 3A |
| Interface | Plug-and-play |
| Special Features | Built-In Speaker/Microphone, Built-in GPS, Charger, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Support steering wheel control |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support including English, Chinese, Arabic, German, French, etc. |
| WIFI | Dual mode 2.4G/5G, IEEE 802.11b/g/n |
| Bluetooth | Bluetooth V2.1 + EDR |
| Video Playing | 1080p@30fps/50Mbps (H.264) |
| USB-connector | 2 way, USB2.0 |
| Built-in DVD Player | No |
| Built-in CD player | No |
| TF/Micro SD Slot | 0 |
| Material | Metal+plastic+glass |
| Certification | CE, FCC, RoHS, WEEE |
| Operating Temperature | -20°C ~ +70°C |
| Storage Temperature | -30°C ~ +85°C |
| Working Humidity | 45%-80% |
| Storage Humidity | 30%-90% |
4. Setup and Installation
4.1. Compatibility
This multimedia system is compatible with specific BMW 5 Series F10 and F11 models:
- For BMW 5 Series F10 F11 CIC System: 2011-2012 models. These typically use a 4-pin LVDS connector.
- For BMW 5 Series F10 F11 NBT System: 2013-2017 models. These typically use a 6-pin LVDS connector.
Note: Please confirm your original car's startup screen and LVDS cable type before purchasing. Purchasing the wrong version will result in incompatibility.

Image: Table showing compatible car models, years, and screen sizes for CIC and NBT systems. Visual examples of CIC and NBT system dashboards are also provided.

Image: Illustration of 4-pin LVDS connector for CIC System and 6-pin LVDS connector for NBT System, crucial for correct model selection.
4.2. Product Accessories List
The package includes the following components:
- 10.25 Inch Multimedia Screen
- Power Cable
- AUX Cable (for CIC systems)
- USB Cable

Image: Visual representation of the 10.25-inch screen and included cables: Power Cable, AUX Cable (For CIC), and USB Cable.
4.3. Wiring Connections
It is highly recommended that installation be performed by a car audio professional.
General Wiring Principles:
- Connect the main power cord to the vehicle's power supply.
- Connect the dedicated USB cable to the original car's USB interface if applicable.
- Connect the AUX audio cable to the original vehicle's AUX interface (especially for CIC models).
- Ensure all LVDS connections are secure and match the original system type (4-pin for CIC, 6-pin for NBT).
- Connect the rearview input, video input, ACC output, GND, rearview power, and 360DET as per the specific vehicle series diagram.
Specific Wiring Diagrams:

Image: Wiring connections for Vehicle Series 1 (EVO series). Shows connections for Power Cable, CD Host Cable, Dedicated USB cable for EVO, Rear view input, Video input, ACC output, GND, Rearview power, and 360DET.

Image: Wiring connections for NBT series. Includes connections for Main Power Cord, USB cable, AUX output, Rear view input, Video input, ACC output, GND, Rearview power, and 360DET.

Image: Wiring connections for CIC series. Includes connections for Main Power Cord, USB cable, AUX output, Rear view input, Video input, ACC output, GND, Rearview power, and 360DET. Note: Disconnect a specific line for CIC models.

Image: Wiring connections for CCC series. Includes connections for Main Power Cord, AUX audio cable, Rear view input, Video input, ACC output, GND, Rearview power, 360DET, and CAN2 (B) connected to the controller.

Image: Wiring connections for NTG 5.0. Includes connections for Main Power Cord, Sim card+USB cable*2, BC113-Multifunction Adapter Cable, DVR-CVBS, CCD-AHD/CVBS, GND, CAM-PWR, ACC-OUT, 360-DET, DVR-PWR, AUX-OUT, USB, and COAXIAL-OUT.

Image: Wiring connections for NTG 4.5. Includes connections for Main Power Cord, BC113-Multifunction Adapter Cable, AMI, Video power supply, ACC OUT, GND, 360 DET, Rearview power, AUX DET, AUX OUT, Video input, Rear view input, and USB (Carplay).

Image: Wiring connections for NTG 4.0. Includes connections for Main Power Cord, BC113-Multifunction Adapter Cable, LVDS BOX, LVDS-BOX PWR, AUX-OUT, AUX-DET, GND, DVR-POW, CAM-PWR, 360-DET, ACC-OUT, DVR-CVBS, CCD-AHD/CVBS, USB, LVDS, and PWR 12V.

Image: Wiring connections for A4/Q5 low configuration. Includes connections for Main Power Cord, Gateway Interface-CAN, USB, ACC-OUT, AUX-OUT, DVR-PWR, 360-DEET, CAM-PWR, DVR-CVBS, CCD-AHD/CVBS.

Image: Wiring connections for A4/Q5 high configuration. Includes connections for Main Power Cord, USB2, LVDS plug of original vehicle, MMI I/F, Gateway Interface-CAN, AUX-OUT, ACC-OUT, DVR-PWR, CAM-PWR, GND, CAN3-H, CAN3-L, 360-DET, DVR-CVBS, CCD-AHD/CVBS, and USB.
5. Operating Instructions
5.1. Main Menu
When the machine is turned on, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. The main menu will be displayed first. Touch the home icon
to return to the main interface, and touch the back arrow to return to the upper menu.

Image: Comparison of the car dashboard before and after installing the MEKEDE Multimedia Touch Screen, showing the integrated display.

Image: Demonstrates that original car functions like radio, CD, steering wheel control, audio system, reversing image, and i-Drive control remain fully functional after installation.
5.2. System Settings
From the main menu, click "Settings" to access the system settings interface. Here you can adjust various parameters:
- Display: Adjust brightness (daytime/nighttime), automatic brightness.
- Volume: Control multimedia, Bluetooth, reverse, and navigation volumes.
- Language: Select your preferred OSD language (e.g., English (US), Chinese, German, French, etc.).
- Time: Set year, month, day, hours, and minutes, and choose between 12-hour or 24-hour format.
- Reverse: Configure original camera settings (AHD720P, AHD1080P, CVBS-NTSC), Radar Display, TrackDisplay, and Reverse full screen display.
- System: View system information (System, App, Mcu, Canbus versions) and perform actions like reboot or factory reset.
5.3. Bluetooth Function
Click "Bluetooth" on the main interface to enter the Bluetooth application. When paired with your mobile phone, all Bluetooth icons will light up, and a Bluetooth icon will appear at the top of the interface. You can dial numbers, access your phone book, and view call records.
5.4. Media Playback (Film & Music)
Film: Click "Video" on the main interface to play audio and video files from the system or external SD card/USB. Supported formats include AVI, MP4, RMVB. Double-click the screen for full-screen mode; touch any area to exit.
Music: Click "Music" on the home screen to play audio and video files. Supported formats include MP3, WAV, and MID. You can select music from USB1 or USB2.
5.5. Car Information Display
The system can display essential car information such as speed, fuel level, oil pressure, and safety warnings directly on the dashboard.

Image: Shows the car information display on the screen, including engine speed, remaining fuel, temperature, parking brake status, seat belt reminder, and door switch display.
5.6. Carplay & Android Auto
This system supports both wireless and wired Carplay and Android Auto, allowing intelligent and safe use of your smartphone's features in the car, including navigation, calls, messages, and music.
Wireless Carplay Connection Steps:
- Turn on Bluetooth and Wi-Fi on your iPhone.
- Search and connect to the device "BTXXXX" via Bluetooth on your phone. The PIN code is: 0000.
- Once paired successfully, a pop-up window will appear on your phone. Tap "Use CarPlay".
Wired Carplay Connection Steps:
- Connect your iPhone to the car's CarPlay-specific USB port using an original or high-quality data cable.
- When a pop-up window appears on your phone, tap "Use CarPlay".
Wireless/Wired Android Auto Connection Steps:
- Turn on Bluetooth and Wi-Fi on your Android phone.
- Search for and connect to the device "BTXXXX" via Bluetooth on your phone. The PIN code is: 0000.
- Once paired successfully, a pop-up window will appear on your phone.
- Connect your Android phone to the device's dedicated USB port using an original or high-quality data cable for wired connection.

Image: Shows the interface for Wireless/Wired Car-Play, demonstrating music, map, and call functions.

Image: Shows the interface for Wireless/Wired Android Auto, demonstrating music, map, and call functions.
5.7. Phone Mirrorlink (Airplay & Miracast)
The system supports wireless/wired mirror link for both iOS and Android phones. This feature allows you to display your phone's screen on the car radio, enabling navigation, video playback, and music streaming from your phone's apps.
Airplay (iOS Screen Mirroring) Connection Steps:
- Turn on the Wi-Fi hotspot on your iPhone.
- Go to your car's settings, then system, and enter the OTA menu.
- Turn on the car's Wi-Fi and connect it to your phone's Wi-Fi hotspot.
- After connecting to the Wi-Fi hotspot, go to your phone's screen mirror settings.
- Once connected, switching your phone to landscape mode will provide a full-screen display on the car radio.
Miracast (Android Screen Mirroring) Connection Steps:
- Open your Android phone and go to the system Settings screen.
- Find "More connections" and turn on "Screen cast" or "Wireless display".
- Find "Miracast" and click to connect to the car radio.
- Once connected, your Android phone screen will be mirrored.

Image: Illustrates the Phone Mirrorlink feature, showing an iPhone and Android phone mirrored to the car radio screen.
5.8. GPS Navigation
The unit features a built-in global positioning system for omni-directional map display, synchronous display of real-time traffic conditions, and accurate positioning. It supports various navigation apps.

Image: Displays various GPS navigation applications supported, including Navitel, iGo, Sygic, Yandex, Google Map, and Waze.
5.9. UI Customization
You can choose from different UI styles to personalize the display. The system also supports automatic switching between day and night modes to reduce visual fatigue.

Image: A collection of different UI styles available for selection, showing various layouts and themes.
6. Maintenance
6.1. OTA Update
The system supports Over-The-Air (OTA) firmware upgrades. Connect the device to Wi-Fi and remotely upgrade the application online to ensure you have the latest features and optimizations.

Image: Illustrates the OTA Update feature with a cloud and arrow icon, indicating support for system firmware upgrades via Wi-Fi.
7. Troubleshooting
- Problem: No response to key operation (protocol failure), abnormal display, or flower screen.
Reason: Model setting is incorrect.
Solution: Enter the factory Settings to set the correct model. - Problem: No Bluetooth function.
Reason: No Bluetooth pairing and connection with mobile phone.
Solution: Enter the Bluetooth Settings and check the machine name and password. - Problem: No video display on the dashcam.
Reason: The type of dashcam is not chosen correctly.
Solution: In System Settings > Factory Settings > ARM related Settings > Dashcam Settings, select the correct type. - Problem: No display when reversing.
Reason: Wrong choice of reversing camera.
Solution: Enter the Settings inside the reversing Settings, choose the original car or rear mounted camera. - Problem: No Sound.
Solution:- Connect the original car Fiber optic cable to the interface of the conversion line, and then connect to the host.
- Connect "AUX" and switch the mode to "AUX".
Note: This unit outputs sound through AUX. Please confirm that your car has an AUX function before ordering. If there is no AUX in your car, you may need to add an FM transmitter to produce audio, but the sound quality will not be as good as AUX.

Image: Detailed steps and diagrams for solving no sound issues, including fiber optic cable connection and AUX mode activation.
- Problem: Original system doesn't show up.
Solution: Connect the original LVDS cable to the back connector of the Android radio. - Problem: Original system is flashing.
Solution: Input "Setting" > "Personalized Setting" > "Resolution ratio". The display screen of the original car should correspond to the option, otherwise the display will be poor.

Image: Step-by-step guide on how to set the resolution in the system settings, including navigating to Factory Settings and entering code 8866.
8. Warranty and Support
This product comes with a 3-year warranty.
The MEKEDE and NaviFly brands are both owned by Shenzhen Mekede Technology Co., Ltd. If you receive products from either brand, they originate from the same manufacturer.

Image: Clarification that MEKEDE and NaviFly are brands from Shenzhen Mekede Technology Co., Ltd.
For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)
9. User Tips
- Always ensure the correct car model and system (CIC/NBT) are selected in the settings for optimal performance and to avoid display issues.
- When connecting via Bluetooth, double-check the device name and PIN code for a successful pairing.
- If experiencing sound problems, verify the fiber optic cable connection and ensure the AUX input is correctly selected. Consider an FM transmitter as an alternative if AUX is unavailable, but be aware of potential sound quality differences.
- For any display anomalies with the original car system, first check the LVDS cable connection and then adjust the resolution settings in the system menu.
- Regularly check for OTA updates via Wi-Fi to keep your system's firmware up-to-date with the latest features and improvements.