Midea RG10B10 (E2)/BGEF

Contents

RG10B10 (E2)/BGEF Remote Control Instruction Manual

Compatible with Midea Air Conditioners

1. Introduction

This manual provides detailed instructions for the use and maintenance of your new RG10B10 (E2)/BGEF remote control. This remote is designed to be compatible with various Midea Air Conditioner models, including RG10A/BGEF, RG10A2 (E2S)/BGCEFU1, and RG10A (B2S)/BGEF. It features a durable ABS material construction and soft plastic buttons for comfortable use.

Front view of the RG10B10 (E2)/BGEF remote control
Figure 1: Front view of the remote control

2. Setup

2.1. Battery Installation

To begin using your remote control, you must first install the batteries.

  1. Open the battery cover located on the back of the remote control.
  2. Confirm the correct polarity (+/-) for the batteries.
  3. Insert two fresh AAA batteries into the compartment. (Batteries are not included).
  4. Close the battery cover securely.
Back view of the remote control showing battery compartment and installation instructions
Figure 2: Battery installation instructions

2.2. Initial Use

This remote control is designed for immediate use with compatible Midea Air Conditioners. No programming or setup is required. Simply insert the batteries, point the remote at your air conditioner, and begin operating.

Remote control highlighting 'NO Need to Set Up' feature
Figure 3: Key features including no setup required

3. Operating Instructions

The remote control features several buttons for controlling your Midea Air Conditioner. Familiarize yourself with the layout and functions:

  • Power Button (ⓘ): Turns the air conditioner ON or OFF.
  • Mode Button: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • Fan Speed Button (♻): Adjusts the fan speed.
  • Swing Button: Activates or deactivates the louver swing function.
  • Turbo Button: Engages rapid cooling or heating for a short period.
  • LED Button: Controls the display light on the air conditioner unit.
  • Clean Button: Initiates the self-cleaning function (if available on your AC model).
  • SET Button: Used for setting various functions, often in conjunction with arrow keys.
  • OK Button: Confirms selections.
  • Up/Down Arrow Buttons (⌃ / ⌄): Adjusts temperature, time, or navigates menu options.
  • Timer/Clock Button (⏱): Sets the timer or clock function.
  • Star/Favorite Button (⭐): Accesses or saves favorite settings.

Point the remote control directly at the air conditioner's receiver for optimal signal transmission.

4. Maintenance

4.1. Battery Replacement

Replace batteries when the remote control's range decreases or the display becomes dim. Always replace both batteries simultaneously with new AAA batteries of the same type. Do not mix old and new batteries, or different types of batteries.

4.2. Cleaning

The remote control is made of durable ABS material. To clean, gently wipe the surface with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry wipe. Do not use harsh chemicals, abrasive cleaners, or immerse the remote in water.

5. Troubleshooting

  • Remote not responding: Check if the batteries are inserted correctly and have sufficient charge. Replace batteries if necessary. Ensure there are no obstructions between the remote and the air conditioner.
  • Limited range: This indicates low battery power. Replace the batteries.
  • Display issues: If the remote's display is dim or blank, replace the batteries.
  • Air conditioner not responding to specific commands: Ensure the remote is pointed directly at the air conditioner. Some functions may not be available on all compatible AC models.

6. Specifications

FeatureDetail
ModelRG10B10 (E2)/BGEF
CompatibilityMidea Air Conditioners (RG10A/BGEF, RG10A2 (E2S)/BGCEFU1, RG10A (B2S)/BGEF)
MaterialABS Plastic
Wireless CommunicationInfrared (IR)
Power Source2 x AAA Batteries (not included)
Dimensions (Approx.)Length: 19.4 cm (7.6 in)
Width: 5 cm (2 in)
Thickness: 2 cm (0.8 in)
Remote control with dimensions indicated
Figure 4: Remote control dimensions

7. User Tips

  • The soft plastic buttons provide a comfortable tactile experience.
  • The ABS material ensures durability and a lightweight design.
  • Always keep the remote control pointed towards the air conditioner's infrared receiver for reliable operation.
  • Store the remote in a cool, dry place away from direct sunlight and extreme temperatures to prolong its lifespan.

8. Warranty & Support

For any issues or questions regarding your remote control, please contact the seller or your product retailer. Keep your purchase receipt as proof of purchase for any potential warranty claims. Specific warranty terms may vary by retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.