Ajazz GP100 NS

Contents

AJAZZ GP100 NS Three Mode Game Controller User Manual

Model: GP100 NS

Brand: Ajazz

1. Product Overview

The AJAZZ GP100 NS is a versatile three-mode game controller designed for multi-platform compatibility, offering a high-performance gaming experience with advanced features such as Hall Effect joysticks and triggers, mechanical buttons, and customizable RGB lighting.

Two AJAZZ GP100NS controllers (white and black) showcasing Dual Hall Effect and multi-platform capabilities.
AJAZZ GP100NS controllers in white and black, highlighting dual Hall Effect and multi-platform support.

Key Features:

  • Dual Hall Effect Technology: TMR Joysticks and Hall-Linear Triggers for precise and drift-free control.
  • Three Connection Modes: Wired (USB Type-C), 2.4G Wireless, and Bluetooth for broad compatibility.
  • High Report Rate: Stable 1000Hz report rate for ultra-low latency gaming.
  • Mechanical Buttons: ABXY buttons with 0.3mm key travel and 5 million press lifespan for clear feedback and durability.
  • Rotary 8-Way D-Pad: Scientifically structured 7-layer design to prevent key jamming.
  • Six-Axis Motion Sensing: Enhanced control and immersion in supported games.
  • Dual Centrifugal Vibration: 4-level multi-vibration to simulate realistic in-game feedback.
  • Customizable RGB Lighting: Dynamic RGB lamp effects on joysticks and charging base.
  • Macro Programming: Four customizable back buttons (M1/M2/M3/M4) with cloud memory for multi-device sync.
  • Built-in Battery: 1200mAh capacity for long gaming sessions.

Package Contents:

  • AJAZZ GP100 NS Game Controller
  • Replaceable Cross Key (1)
  • Data Line (USB Type-C cable) (1)
  • Smart Wireless Charging Base (for GP100NS Set)
  • 2.4G Wireless Receiver (for 2.4G connection)
Diagram showing the contents of the AJAZZ GP100NS package, including the controller, replaceable cross key, and data line.
Contents of the AJAZZ GP100NS package.

2. Setup Guide

2.1 Charging the Controller

  1. Connect the provided USB Type-C data line to the controller and a power source (e.g., computer USB port, USB wall adapter).
  2. Alternatively, if you have the GP100NS Set, place the controller onto the Smart Wireless Charging Base.
  3. During charging, the RGB lighting on the controller (and base, if applicable) will breathe.
  4. Once fully charged, the RGB lighting will turn off, indicating the battery is full.
Image of the AJAZZ GP100NS controller on its smart wireless charging dock, with RGB lighting.
AJAZZ GP100NS controller on its smart wireless charging dock.

2.2 Connecting the Controller

The GP100 NS supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. Use the mode switch located on the back of the controller to select your desired connection type.

Close-up of the mode switch (NS/BT/2.4G) on the back of the controller.
Mode switch for NS/BT/2.4G connections.

2.2.1 Wired Connection (USB Type-C)

  1. Ensure the mode switch on the back of the controller is set to the appropriate wired mode (e.g., PC).
  2. Connect the USB Type-C cable to the controller and the other end to your gaming device (PC, console).
  3. The controller should be automatically recognized by your device.

2.2.2 2.4G Wireless Connection

  1. Set the mode switch on the back of the controller to '2.4G'.
  2. Plug the 2.4G wireless receiver into an available USB port on your gaming device.
  3. The controller and receiver should pair automatically.

2.2.3 Bluetooth Connection

  1. Set the mode switch on the back of the controller to 'BT'.
  2. On your gaming device (PC, mobile, tablet, Switch), navigate to the Bluetooth settings.
  3. Search for new devices and select 'AJAZZ GP100 NS' (or similar) to pair.
  4. Follow any on-screen prompts to complete the pairing process.

3. Operating Instructions

3.1 Basic Controls

  • ABXY Buttons: Standard action buttons with mechanical switches for crisp feedback.
  • Joysticks: Split Hall 3D precision-adjusted joysticks provide smooth, accurate movement without drift.
  • D-Pad: Rotary 8-Way Direction Pad for precise directional input. Its 7-layer structure ensures no key jamming.
  • Triggers (L2/R2): Hall Sensor Dual Safety Triggers with one-key toggle between linear and micro-movement modes.
  • Shoulder Buttons (L1/R1): Standard shoulder buttons.
  • Six-Axis Motion Sensing: Utilize motion controls in compatible games.
  • RGB Lighting: The joysticks feature RGB lighting that can be customized with dynamic modes.
Close-up of the Hall Double-trigger with linear and micro-movement switching.
Hall Double-trigger with linear and micro-movement one-key switching.
Exploded view diagram of the 7-layer 8-direction cross key (D-pad) mechanism.
Internal structure of the 7-layer 8-direction cross key (D-pad).
Diagram showing the internal structure of fully mechanical keys with 0.3mm key travel and 5 million press life.
Fully mechanical keys with clear feedback and long lifespan.

3.2 Macro Programming (M1-M4 Back Buttons)

The GP100 NS features four customizable back buttons (M1, M2, M3, M4) that support macro programming. These macros can be stored in cloud memory and synced across different devices, eliminating the need to re-edit when switching platforms.

  1. Refer to the detailed instructions in the official PDF user manual for specific steps on how to program and manage macros for the M1-M4 buttons.
  2. Ensure your controller is connected to a device with the necessary software (if applicable) for macro configuration.
Image showing the M1, M2, M3, M4 back buttons for macro programming.
M1, M2, M3, M4 back buttons for macro programming.

3.3 Vibration Feedback

The controller is equipped with dual centrifugal vibration motors, offering 4 levels of multi-vibration. This feature enhances immersion by simulating realistic shocks and feedback based on in-game events.

Image showing the built-in asymmetric rotor motor for vibration feedback.
Built-in asymmetric rotor motor for dynamic vibration feedback.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the surface and internal components.
  • Storage: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Battery Care: To prolong battery life, avoid fully discharging the controller frequently. If storing for an extended period, charge the battery to approximately 50% and recharge every few months. The controller will power off after approximately 5 minutes of inactivity to conserve battery.
  • Avoid Drops: Protect the controller from drops and impacts, which can damage internal components and affect performance.

5. Troubleshooting

  • Controller Not Connecting:
    • Ensure the mode switch (NS/BT/2.4G) on the back of the controller is set correctly for your desired connection type.
    • For 2.4G, ensure the receiver is properly plugged in.
    • For Bluetooth, ensure your device's Bluetooth is enabled and the controller is in pairing mode.
    • Try restarting both the controller and your gaming device.
    • Ensure the controller has sufficient battery charge.
  • Input Lag/Latency:
    • The GP100 NS supports a 1000Hz report rate for ultra-low latency. Ensure you are using a stable connection (wired or 2.4G wireless) and that there are no significant wireless interferences in your environment.
    • Update your device's drivers for the controller if available.
  • Buttons Not Responding:
    • Check if the controller is properly connected and powered on.
    • Ensure no debris is lodged around the buttons.
    • If specific buttons are unresponsive, try resetting the controller (refer to the PDF manual for reset procedures).
  • Charging Issues:
    • Verify the USB Type-C cable is securely connected to both the controller and the power source.
    • Try a different USB port or power adapter.
    • If using the charging base, ensure the controller is correctly seated and the base is powered.

6. Specifications

Feature GP100NS Set GP100 NS
Support Platform PC, Switch, Android, iOS
Connection Mode Wired / 2.4G / BT
ABXY Buttons All mechanical buttons, 500W lifespan
Six-axis Motion Sensing Yes
Report Rate (ROI) 1000Hz
Rocker Split Hall 3D precision-adjusted joystick
Charging Method Smart wireless charging base + Type-C charging Type-C charging
Trigger Buttons Hall Sensor Dual Safety Trigger, Linear & Micro Switch One-Key Toggle
Cross Key Rotary 8-Way Direction Pad
Battery 1200mAh
Back Button Expansion Cloud Memory 4 Back Buttons (M1/M2/M3/M4) Support Cloud Key Sync Across Devices
Lamp Effect RGB Lighting / Custom Dynamic Modes Supported
Controller Dimensions 157.5mm x 102.5mm x 63mm (6.2in x 4.03in x 2.48in)
Base Dimensions 98mm x 62mm x 67mm (3.85in x 2.44in x 2.48in) N/A
Weight (Controller) 244.3g ≈244.3g
Weight (Base) 144.6g N/A
Gift D-pad (blue/gray)
Parameter Configuration Table for GP100NS Series.
Detailed specifications for the GP100NS series.
Dimensions diagram for the AJAZZ GP100NS controller and its charging base.
Physical dimensions of the GP100NS controller and charging base.

7. User Tips

  • Optimize Latency: For competitive gaming, utilize the wired or 2.4G wireless connection modes to take full advantage of the 1000Hz report rate and minimize input lag.
  • Master Triggers: Experiment with the linear and micro-movement trigger modes to find the best setting for different game genres (e.g., linear for racing, micro-movement for shooting).
  • Customize Macros: Take time to program the M1-M4 back buttons for frequently used in-game actions or complex combos to gain a competitive edge. Remember that these settings can be synced via cloud memory.
  • D-Pad Precision: The 8-way D-pad is designed for precision. Practice with it to fully utilize its capabilities in fighting games or titles requiring accurate directional inputs.
  • Battery Management: Keep an eye on the controller's battery level and charge it regularly to avoid interruptions during critical gaming moments. The RGB lighting turning off indicates a full charge.

8. Frequently Asked Questions (FAQ)

Q: Is the AJAZZ GP100 NS compatible with all PlayStation and Xbox consoles?
A: The controller is listed as compatible with 'PlayStation' and 'Xbox' platforms, in addition to PC, Switch, and Android/iOS. Specific model compatibility may vary, please refer to your console's accessory support or the official AJAZZ website for detailed information.
Q: How do I switch between linear and micro-movement trigger modes?
A: The Hall Sensor Dual Safety Triggers feature a one-key toggle for switching between linear and micro-movement modes. The exact button or switch for this function is detailed in the comprehensive PDF user manual.
Q: Can I use the controller while it's charging?
A: Yes, the controller can typically be used in wired mode while it is connected via the USB Type-C cable for charging.
Q: What does the 1000Hz Report Rate mean?
A: A 1000Hz report rate means the controller sends data to your device 1000 times per second. This results in extremely low input latency, making your actions in-game feel more immediate and responsive compared to controllers with lower report rates.

9. Warranty and Support

For detailed warranty information, technical support, and further assistance, please refer to the official AJAZZ website or contact the manufacturer directly.

Official User Manual (PDF):

A comprehensive user manual in PDF format is available for download. This document contains detailed instructions on advanced features, button mapping, and troubleshooting specific scenarios.

Reference the PDF: AJAZZ GP100 NS User Manual (PDF)

Manufacturer Information:

  • Manufacturer: Shenzhen Golden bean Electronic Technology Co, Ltd
  • Address: 302, Building 1, No.3, Xinfa West Road, Xiangshan Community, Xinqiao Street, Bao'an District, Shenzhen Shenzhen Guangdong Province, China
  • E-mail/Tel: yunjian2022@aliyun.com
Image showing product name, manufacturer, address, email, and warnings.
Manufacturer details and safety warnings.

Safety Warnings:

  • WARNING: Not for children under 3 years.
  • Risk of Suffocation: Contains small parts. Keep away from young children.
  • CHOKING HAZARD: Small parts. Not for Children under 3 years.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.