VIGOSIT Gaming Chair with Cat Ears User Manual

1. Product Overview

The VIGOSIT JD-02 Gaming Chair is designed for comfort, ergonomics, and style, featuring unique cat ear decorations and a cat paw-shaped lumbar support pillow. It is suitable for gaming, office work, and relaxation.

Key Features:

• Adjustable backrest tilt from 90° to 155°
• Adjustable seat height
• Retractable footrest
• Removable cat ears and embroidered cat head logo
• Cat paw-shaped lumbar support pillow with massage function
• High-density foam cushioning
• BIFMA certified gas cylinder for safety

2. Setup and Assembly

Please check all parts before assembling. If you have any questions during assembly, please feel free to contact the after-sales service department at vigositus@163.com.

Parts Checklist:

Assembly Instructions:

1. Installation of Base and Gas Cylinder:
   1. Install the five feet of the base to the core of the base as shown. Use five M6*20mm (A) screws to reinforce the joints of the base.
   2. Turn the base over and insert the casters (J) firmly as far as they will go. (It might be a bit difficult to prevent casters from coming off).
   3. Insert the gas cylinder (F) into the base (H) as shown.
2. Installation of Tilt Mechanism:
   1. Place the seat (O) on a stable surface (e.g., a table).
   2. Using the four M8*20mm (C) screws, attach the Tilt Mechanism (I) to the seat cushion (O).
3. Installation of the Footrest:
   1. Using the four M6*25mm (B) screws, attach two footrest rail buckles (G) to the seat cushion (O).
   2. Using the two M8*30mm (D) screws, attach the footrest (P) to the footrest rail (K).
   3. Insert the footrest rail (K) into the footrest rail buckle (G).
   4. Note: Use the rubber ring (E) to clamp the end of the footrest rail as shown in the picture to prevent the footrest from falling.
4. Installation of Backrest:
   1. Align the steel plate (M) with the four holes on the backrest (N) and screw in the 4 M6*20mm (A) screws.
   2. Then, with the seat cushion (O) in a stable position, insert the back support plate (M) into the tilt mechanism (I) and install the three M6*20mm (A) screws.
   3. Note: The back support steel plate has an inclined design; please note that the steel plate is inclined outward when installing.
5. Fix the Headrest and Lumbar Pillow:
   1. The straps of the headrest (Q) are directly fixed to the top of the backrest.
   2. The lumbar pillow (R) belt is passed through the gap between the backrest (N) and the seat cushion (O) and fixed.
6. Installation of Armrest:
   1. Attach the armrest (L) to the main body as shown. Please note the strength of screwing; if the backrest does not tip over, the armrest screws may be too tight.
7. Installation of Cushion:
   1. Assemble the upper and lower parts of the chair as shown.
   2. If lacking energy, or installing by yourself, please place the support side of the chair on the ground, insert the gas cylinder into the tilt mechanism, and pick up the chair.

A PDF version of the user manual is available for download here.

3. Operating Instructions

Backrest Angle Adjustment Function:

• When adjusting the angle of the backrest, sit on the chair and operate the reclining lever.
• Pull the lever up to release the reclining function, and tilt it back to increase the angle of the backrest. If it is the other way around, it will decrease.
• Push the lever down to fix the backrest at the current angle.

Seat Height Adjustment Function:

• When adjusting the height, sit on the chair and operate the lift lever.
• If you raise the lift lever while your hips are floating, the seat surface will rise.
• If you raise the lift lever while sitting, the seat surface will drop.

Vibration Massage Function:

• The massage device (integrated into the lumbar pillow) functions by connecting its USB cable to a power source, such as a PC/laptop USB port or a USB wall adapter.

Retractable Footrest:

• Pull out the footrest from underneath the seat to extend it.
• Push it back in when not in use to store it neatly.

Removable Cat Ears:

• The decorative cat ears are attached to the headrest and can be easily removed or reattached as desired.

4. Maintenance

General Care:

• Avoid using the product in places exposed to direct sunlight, heat (e.g., near a stove), or in areas with significant humidity or dryness.
• Regularly tighten all bolts and screws every 3-6 months to ensure stability and safety.

Cleaning:

• Use a slightly wet cloth to remove dust or dirt from the main body of the chair.
• Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the chair's materials.

5. Troubleshooting

• Chair feels wobbly: Ensure all screws and bolts are fully tightened. Re-tighten any loose fasteners.
• Chair does not adjust height smoothly: Check for any obstructions around the gas lift cylinder. Ensure the lever mechanism is not jammed.
• Backrest does not recline: Verify that the reclining lever is fully engaged or disengaged. Check for any obstructions in the reclining mechanism.
• Massage function not working: Ensure the USB cable is securely connected to a working power source. Try a different USB port or adapter.

If you encounter persistent issues not resolved by these steps, please contact customer support.

6. Specifications

7. User Tips

• Easy Assembly: Many users find the chair straightforward to assemble, especially with the provided instruction manual. Take your time and follow each step carefully.
• Comfort First: The chair is designed for comfort. Adjust the seat height, backrest angle, and lumbar pillow position to find your optimal ergonomic setup for long gaming or work sessions.
• Utilize the Footrest: Extend the retractable footrest for added comfort during breaks or when reclining to relax.

8. Warranty and Support

Warranty:

This product comes with a 2-year manufacturer warranty from the date of delivery. If a fault occurs due to manufacturing defects within this period, the manufacturer will repair or replace the product free of charge.

Customer Support:

For any questions, issues, or warranty claims, please do not hesitate to contact customer service:

• Email: vigositus@163.com