1. Product Overview
The JUOVI 65W 20000mAh Portable Charger Power Bank is a high-capacity, fast-charging solution designed to power a wide range of devices, from smartphones and earbuds to laptops and tablets. Featuring multiple output ports and advanced safety features, it's an ideal companion for travel and daily use.

Figure 1: JUOVI 65W 20000mAh Power Bank with included USB-C cables.
Package Contents
- 1 x JUOVI 65W 20000mAh Power Bank
- 1 x 3A Type-C to Type-C Charging Cable (30 cm)
- 1 x User Instruction Manual
2. Setup and Initial Use
Initial Charging of the Power Bank
Before first use, it is recommended to fully charge your JUOVI Power Bank. Use a compatible USB-C power adapter (not included) with a minimum output of 45W for the fastest charging experience.
- Connect the included Type-C to Type-C cable to one of the power bank's USB-C IN/OUT ports (Type-C1 or Type-C2).
- Connect the other end of the cable to a suitable USB-C power adapter.
- The digital display on the power bank will show the charging progress, indicating the battery percentage.
- The power bank is fully charged when the display shows 100%.

Figure 2: The power bank supports 65W max output and 45W max input for two-way fast charging.
Identifying Ports
The power bank is equipped with multiple ports for versatile charging:
- Type-C1 IN/OUT: USB-C port for both charging the power bank (input) and charging devices (output).
- Type-C2 IN/OUT: Another USB-C port for both input and output.
- USB-A1 OUT: Standard USB-A port for charging devices.
- USB-A2 OUT: Another standard USB-A port for charging devices.

Figure 3: Port layout and digital display on the JUOVI Power Bank.
3. Operating Instructions
Charging Your Devices
- Wake Up the Power Bank: Short press the power button once to activate the digital display and wake up the power bank.
- Connect Your Device: Use an appropriate charging cable to connect your device to one of the power bank's output ports (Type-C1, Type-C2, USB-A1, or USB-A2).
- Charging Begins: Your device should begin charging automatically. The digital display will remain active for a few seconds, showing the remaining battery percentage.
- Automatic Sleep Mode: If no device is connected or charging is complete, the power bank will automatically enter sleep mode after approximately 5 seconds to conserve power.

Figure 4: The power bank can charge up to 4 devices simultaneously.
Fast Charging Capabilities
The JUOVI Power Bank supports up to 65W output via its USB-C ports, compatible with PD/QC fast charging protocols. This allows for rapid charging of laptops, tablets, and smartphones.

Figure 5: Example of fast charging a MacBook Pro 14" to 51% in 30 minutes.
Low-Current (Trickle Charging) Mode
This mode is ideal for charging low-power devices such as Bluetooth earbuds, smartwatches, and fitness trackers, preventing overcharging and protecting their smaller batteries.
- Ensure the power bank is awake (short press the power button).
- Double-press the power button to activate low-current mode. The display may show a specific indicator (e.g., a single digit cycling).
- Connect your low-power device. The power bank will provide a stable, low-current output for approximately 2 hours.
- To exit low-current mode and return to normal charging, disconnect the device, turn off the power bank (if it doesn't automatically), and then reconnect the device for standard charging.
Digital Display
The integrated digital display clearly shows the remaining battery percentage of the power bank, allowing you to monitor its charge level at a glance.
Product Demonstration Video
Video 1: Official product demonstration showcasing features and usage.
4. Maintenance and Care
Storage
- Store the power bank in a cool, dry place.
- Avoid storing the product in hot or humid environments.
- If the product is not used for long periods, you should charge and discharge it once every three months to maintain battery health.
Cleaning
- Do not clean the product with harmful chemicals or detergents.
- Use a soft, dry cloth to wipe the surface of the power bank.
General Care
- Avoid dropping the product or subjecting it to excessive force, as this may cause damage.
- Do not disassemble the product. Take it to qualified service personnel when service is required.
5. Troubleshooting
Power Bank Gets Warm During Use
It is normal for the power bank to feel warm during operation, especially when charging devices at high power (e.g., laptops) or when the connected device's battery is very low. This is a normal operating condition and should not be a cause for concern.
Device Not Fast Charging
- Ensure your mobile phone or device supports fast charging protocols (PD/QC).
- Verify that the charging cable you are using is capable of fast charging and is not damaged.
- Some newer device models or specific fast charging protocols might not be fully compatible.
Power Bank Not Charging
- Check if the charging cable is securely connected to both the power bank and the power adapter.
- Ensure the power adapter you are using is functional and provides sufficient power (at least 45W for optimal charging).
- Try using a different USB-C cable or power adapter.
Difficulty Exiting Low-Current Mode
If your device remains in low-current mode unexpectedly, disconnect the charging cable from the device, turn off the power bank (if it doesn't automatically), and then reconnect the cable to the device. This should reset the charging mode to standard fast charging.
6. Specifications
| Attribute | Value |
| Model | 65W 20000mAh Portable Charger Power Bank |
| Battery Capacity | 20000mAh |
| Max Output | 65W |
| Max Input | 45W |
| Input Interface | USB-Type C |
| Output Interface | Double USB, USB-Type C |
| Battery Type | 18650 Lithium Battery, Lithium Polymer |
| Shell Material | Plastic |
| Features | Digital Display, Two-way Quick Charge, Auto Shut-Off, Over Charging Protection, Short Circuit Protection |
| Certifications | PSE, RoHS, CE, UL, FCC |
| Dimensions | 13.7cm x 7cm (approximate) |
| Weight | 0.392 kg |
| Operating Temperature | 0°C to 45°C |

Figure 6: Approximate dimensions of the JUOVI Power Bank.
7. User Tips
- Exiting Low-Current Mode: If you activate the low-current mode (trickle charging) by double-clicking the power button, to return to standard fast charging for a device, you may need to disconnect the cable, turn off the power bank, and then reconnect the cable to the device. Simply double-clicking again might not always switch it back.
- Optimal Charging Speed: For maximum charging speed to a single device, avoid charging multiple devices simultaneously, as the power bank intelligently distributes power, which can slow down individual port output.
8. Safety and Support
Important Safety Instructions
- Do not use a power supply or charger not recommended or sold by the product manufacturer, as this may result in a risk of fire or injury to persons.
- Do not expose the product to heat or fire.
- Do not dispose of the product in household waste. It must be recycled at an appropriate collection point for electronic and electrical equipment.
- Keep cells or batteries of different electrochemical systems separate from each other when disposing.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Warranty and Support
For product support, warranty information, or technical assistance, please contact JUOVI customer service:
- Website: www.juovipower.com
- Email: service@juovipower.com