1. Introduction
Thank you for choosing the Flytec V802 Pro RC Bait Boat. This advanced remote-controlled fishing boat is designed to enhance your fishing experience with precise bait delivery, GPS positioning, and intelligent features. Please read this manual thoroughly before operating the boat to ensure safe and efficient use.
2. Safety Information
- Always operate the bait boat in open water, away from swimmers, other boats, and obstacles.
- Do not operate the boat in strong winds or extreme weather conditions.
- Keep hands and loose clothing away from propellers when the boat is powered on.
- Ensure all compartments are securely closed before placing the boat in water to maintain waterproofing.
- Store the boat and batteries in a cool, dry place, away from direct sunlight and heat sources.
- Supervise children when operating the bait boat.
3. Package Contents
Please check the package to ensure all items are present:

- 1 x Fishing Bait Boat (V802 Pro)
- 1 x Fishing Bait Boat Battery (7.4V 18000mAh or other specified capacity)
- 1 x Remote Controller
- 2 x Antennas
- 2 x Control Sticks (for remote controller)
- 2 x Spare Propellers
- 1 x Remote Controller Back Cover Screw
- 1 x Hanging Rope (for remote controller)
- 1 x USB Charging Cable
- 1 x Instruction Manual
4. Setup
4.1. Charging the Boat Battery
- Connect the boat battery to the USB charging cable.
- Plug the USB charging cable into a suitable USB power adapter (not included).
- The charging indicator on the battery will show its status (refer to battery specific instructions if provided).
- Charging times vary based on battery capacity: 6h (for 5200mAh), 8h (for 12000mAh), 10h (for 18000mAh).
4.2. Installing Remote Controller Batteries
- Open the battery compartment on the back of the remote controller.
- Insert 4 x AA batteries (not included), ensuring correct polarity.
- Close the battery compartment and secure it with the provided screw.
4.3. Installing Antennas
- Screw the two antennas onto the designated ports on the bait boat.
- Screw the remote control antenna onto the designated port on the remote controller.
4.4. Installing Boat Battery

- Locate the battery compartment on the bait boat (often under a removable cover).
- Connect the fully charged boat battery to the boat's power connector.
- Place the battery securely into the compartment. The boat supports dual batteries for extended operation.
- Close the battery compartment cover tightly to ensure waterproofing.
5. Operating Instructions
5.1. Powering On/Off


- Turn on the remote controller first.
- Press the power button on the bait boat to turn it on. The boat's lights will illuminate.
- To power off, turn off the boat first, then the remote controller.
5.2. Basic Controls
Use the joysticks on the remote controller for movement:
- Left Joystick: Controls forward/backward movement and turning.
- Right Joystick: Controls turning.
5.3. Loading and Releasing Bait

- Open the covers of the four independent bait chambers (silos).
- Load up to 3KG of corn, bait particles, mixed bait, or hooks into the chambers.
- Close the chamber covers securely.
- Use the designated buttons on the remote controller (Front Left Silo, Rfont Right Silo, Back Left Silo, Back Right Silo) to release bait from individual chambers.
5.4. GPS Positioning and Auto-Return

- Setting GPS Pilot Points: The boat can locate and store up to 160 GPS pilot points. Refer to the remote controller's display and buttons (e.g., 'OK', 'Origin') to set and navigate to these points.
- Automatic Navigation: Once points are set, the boat can automatically navigate from the starting point to a target point to make a nest.
- Auto-Return Function: The boat will automatically return to its starting point if the remote control runs out of power, the boat loses control due to insufficient battery, or exceeds the 500-meter control range.
5.5. Cruise Mode

- To activate fixed speed cruise mode, push both joysticks forward for 5 seconds.
- To exit cruise mode, push both joysticks back.
5.6. Night Fishing Lights

- The boat features a high-brightness waterproof headlight for a broad night fishing view.
- Rear blue and red lights automatically change according to the sinking boat's signal power status, providing clear warning signals to enhance safety.
- Use the 'Lighting Button' on the remote controller to manage the lights.
5.7. Fish Finder Attachment

The boat is designed with a stern hook and tail compartment snap to support the use of a lanyard fish finder or hook feed line.
6. Maintenance
6.1. Cleaning
- After each use, wipe down the boat with a clean, damp cloth.
- Ensure no bait residue or debris remains in the bait chambers or around the propellers.
- Dry the boat thoroughly before storage.
6.2. Propeller Care

- The propellers are equipped with anti-winding protective covers to prevent weeds and debris from entanglement.
- Regularly inspect the propellers and covers for any trapped debris and remove it carefully.
- If a propeller is damaged, replace it with a spare propeller from the package.
6.3. Battery Storage
- Remove batteries from both the boat and the remote controller if storing for an extended period.
- Store batteries in a cool, dry place.
6.4. Waterproofing

The boat features a 5-level wind resistant, seamless hull, and a fully enclosed waterproof cabin. Always ensure all covers and seals are properly secured before use to maintain its waterproof integrity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Boat does not respond to remote control | Low battery in remote or boat; Out of range; Interference; Not paired. | Charge/replace batteries. Bring boat closer. Re-pair remote and boat (refer to specific pairing instructions in the included manual). |
| Boat drifts or does not move straight | Propeller entangled; Gyroscope calibration needed; Strong currents. | Check and clear propellers. Calibrate gyroscope (refer to remote control diagram for 'Calibration' button). Operate in calmer waters. |
| Bait chambers do not open | Mechanism jammed; Low power. | Check for obstructions. Ensure boat battery is sufficiently charged. |
| Auto-return activates unexpectedly | Low boat battery; Signal loss; Exceeded control range. | This is a safety feature. Ensure boat battery is fully charged. Stay within 500m control range. |
8. Specifications

| Feature | Detail |
|---|---|
| Item No. | V802 PRO |
| Material | ABS Material |
| Bait Load | 3kg / 6.6 lbs |
| Color | Black/Orange |
| Boat Size | 52.7 x 26.4 x 50 cm / 20.8 x 10.4 x 19.7 inches |
| Net Weight | 2219g / 4.89 lbs |
| Motor | 390 Powerful Motor |
| Battery | 7.4V 5200/12000/18000mAh (depending on configuration) |
| Control Distance | 500 meters (Note: Some images indicate 800m, but 500m is specified in text) |
| Control Battery | 4 x AA Battery (Not Included) |
| Charging Time | 6h/8h/10h (depending on battery capacity) |
| Playing Time | 2h/4h/6h (depending on battery capacity) |
| GPS Pilot Points | Up to 160 points |
| Positioning System | Multi-satellite hybrid engine (GPS L1, GALILEO E1, G1SBAS L1, GLONASS, QZSS L1, BEIDOU B1) |
| Waterproofing | 5-level wind resistant, seamless hull, fully enclosed waterproof cabin |
| Antennas | Dual antenna transceiver for stable signal |
9. User Tips
- The Flytec V802 Pro bait boat is suitable for use in both fresh and salt water. Remember to rinse thoroughly with fresh water after use in saltwater to prevent corrosion.
- Always ensure the boat's battery is fully charged before heading out for a fishing session to maximize operating time and prevent unexpected auto-returns.
- Familiarize yourself with the remote control layout and GPS functions in a calm environment before using it for actual baiting.
10. Warranty and Support
For any issues, questions, or support needs, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.