MEKEDE 10.25" intelligence Linux system Car Radio For BMW X5 E70 BMW X6 E71

Contents

MEKEDE 10.25" Linux System Car Radio Instruction Manual

Model: 10.25" intelligence Linux system Car Radio For BMW X5 E70 BMW X6 E71

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE car multimedia system.

1. Safety Information and Warm Tips

Please read all instructions carefully before installation and operation.

  • Driving Safety: Do not watch videos or operate the machine while driving. Adjust volume to hear outside sounds.
  • Parking: If you encounter difficulties operating the system, park your car in a safe place.
  • Children: Do not allow children to operate the machine to avoid personal injury or machine damage.
  • Navigation: Follow traffic rules when using the satellite navigation function.
  • Prohibited Areas: Do not use electronic equipment or open fire in prohibited places (e.g., gas stations, wineries, strong electromagnetic interference areas).
  • Professional Installation: Do not attempt to maintain, repair, or install the machine yourself. It is highly recommended to have the unit installed by a car audio professional.
  • Placement: Do not install the machine in direct sunlight or in areas with other hazardous substances. Avoid placing the LCD screen near air conditioning vents where hot or cold air blows directly onto it, as this may cause damage.
  • Screen Care: Do not scratch the display screen with sharp objects or press it vigorously with hard objects.
  • Power System: This machine is suitable for a car 12V power system (must have a grounding wire). Do not install on 24V cars, as it will damage the machine.
  • Short Circuit Prevention: To prevent short circuits, turn off the car and disconnect the connection between ACC and B+ before installation.

Note: Due to continuous improvement of product functions, this manual is for reference only.

2. Product Overview

The MEKEDE 10.25" Linux System Car Radio is an intelligent multimedia navigation unit designed for BMW X5 E70 and X6 E71 models. It features a QLED 1920*720 full-fit screen, supports AHD 1080P rearview camera, and integrates wireless Carplay and Android Auto.

MEKEDE 10.25 inch Linux System Car Radio for BMW X5 E70 X6 E71
MEKEDE 10.25 inch Linux System Car Radio for BMW X5 E70 X6 E71.

2.1 Key Features

  • Operating System: Linux T113
  • Display: 10.25-inch QLED Capacitive Touch Screen, 1920x720 Resolution
  • Connectivity: Wireless/Wired Carplay, Wireless/Wired Android Auto, AirPlay, Autolink, Dual-mode WiFi (2.4G/5G), Bluetooth V2.1+EDR
  • Multimedia: Supports MP3, MP4, WMA, JPEG, AVI, MP4, RMVB video formats.
  • Navigation: Built-in global positioning system with support for various map applications (Navitel, iGO, Sygic, Yandex, Google Maps, Waze, Goode Map).
  • Original Car Functionality: Retains original radio system, CD function, steering wheel control, audio system, reversing image, and i-Drive control.
  • Rearview Camera Support: AHD 1080P rearview video.
Original car functions working properly
The unit seamlessly integrates with and retains original car functions.
Wireless and Wired Carplay and Android Auto
Supports both wireless and wired Carplay and Android Auto for seamless smartphone integration.

2.2 Product Accessories List

Product Accessories List
The package includes the 10.25-inch screen, power cable, AUX cable, and USB cable.

3. Compatibility

This unit is compatible with specific BMW X5 E70 and X6 E71 models based on their original car system (CCC or CIC).

Compatibility table for BMW X5 E70 and X6 E71
Ensure your car's system matches the compatibility requirements.
Compatible Cars
SYSTEMMODELYEARSCREEN
CCCX5 E70 X6 E712007-201010.25inch
CICX5 E70 X6 E712011-201210.25inch

If you are unsure about your car model's compatibility, please provide a photo of your original car's center console to customer service for verification.

4. Installation Guide

Professional installation is highly recommended. Ensure the car's power is off and the battery is disconnected before starting installation.

4.1 Before and After Installation

Before and After Installation Comparison
Visual comparison of the car dashboard before and after installing the MEKEDE unit.

4.2 Wiring Connections

Refer to the specific wiring diagrams for your vehicle series (EVO, NBT, CIC, CCC, NTG 5.0, NTG 4.5, NTG 4.0, A4/Q5 low/high configuration) to ensure correct connections.

Detailed Wiring Diagrams and Features
Detailed wiring diagrams and feature highlights for various vehicle series.

4.2.1 Wiring Connections (Vehicle Series 1 - EVO)

Wiring Diagram for EVO Series
Wiring diagram for EVO series vehicles. Connect the main power cord, dedicated USB cable, and ensure proper connections for rear view input, video input, ACC output, GND, rearview power, and 360DET.

4.2.2 Wiring Connections (NBT Series)

Wiring Diagram for NBT Series
Wiring diagram for NBT series vehicles. Includes connections for main power, USB, AUX output, rear view input, video input, ACC output, GND, rearview power, and 360DET. Ensure to plug into the AUX interface of the original vehicle.

4.2.3 Wiring Connections (CIC Series)

Wiring Diagram for CIC Series
Wiring diagram for CIC series vehicles. Includes connections for main power, USB, rear view input, video input, ACC output, GND, rearview power, and 360DET. Disconnect the specified line for CIC models.

4.2.4 Wiring Connections (CCC Series)

Wiring Diagram for CCC Series
Wiring diagram for CCC series vehicles. Includes connections for main power, SIM card + USB cables, 360DET, rearview power, ACC OUT, GND, 5V OUT, AUX OUT, rear view input, video input, and CAN2 (B) connected to the controller. Ensure to plug into the AUX interface of the original vehicle.

4.2.5 Wiring Connections (Vehicle Series 3 - NTG 5.0)

Wiring Diagram for NTG 5.0 Series
Wiring diagram for NTG 5.0 series vehicles. Includes connections for main power, BC113-Multifunction Adapter Cable, DVR-CVBS, CCD-AHD/CVBS, GND, CAM-PWR, ACC-OUT, 360-DET, DVR-PWR, AUX-OUT, USB, and COAXIAL-OUT.

4.2.6 Wiring Connections (NTG 4.5 Series)

Wiring Diagram for NTG 4.5 Series
Wiring diagram for NTG 4.5 series vehicles. Includes connections for main power, BC113-Multifunction Adapter Cable, AMI, video power supply, ACC OUT, BONTG43, BINTG4.5, 2024, GND, 360 DET, rearview power, AUX DET, AUX OUT, video input, rear view input, and USB (Carplay).

4.2.7 Wiring Connections (NTG 4.0 Series)

Wiring Diagram for NTG 4.0 Series
Wiring diagram for NTG 4.0 series vehicles. Includes connections for main power, BC113-Multifunction Adapter Cable, LVDS-BOX PWR, AUX-OUT, AUX-DET, GND, DVR-POW, CAM-PWR, 360-DET, ACC-OUT, DVR-CVBS, CCD-AHD/CVBS, USB, and LVDS PWR 12V.

4.2.8 Wiring Connections (Vehicle Series 2 - A4/Q5 Low Configuration)

Wiring Diagram for A4/Q5 Low Configuration
Wiring diagram for A4/Q5 low configuration vehicles. Includes connections for main power, Gateway Interface-CAN, USB, ACC-OUT, AUX-OUT, DVR-PWR, 360-DEET, CAM-PWR, DVR-CVBS, and CCD-AHD/CVBS.

4.2.9 Wiring Connections (A4/Q5 High Configuration)

Wiring Diagram for A4/Q5 High Configuration
Wiring diagram for A4/Q5 high configuration vehicles. Includes connections for main power, USB2, LVDS plug of the original vehicle, power line MMI I/F, Gateway Interface-CAN, AUX-OUT, ACC-OUT, DVR-PWR, CAM-PWR, GND, CAN3-H, MMI I/F, CAN3-L, 360-DET, DVR-CVBS, and CCD-AHD/CVBS.

4.3 Setting AUX Mode for Sound

To ensure sound output, you may need to set the original car system to AUX mode. This is crucial for models with NBT, CCC, or CIC systems.

How To Solve No Sound Problem and AUX Mode Setup
Instructions for connecting fiber optic cable and setting the original system to AUX mode to resolve no sound issues.
  1. Connect Fiber Optic Cable: Connect the original car fiber optic cable to the interface of the conversion line, and then connect to the host.
  2. Connect AUX: Connect the AUX cable and switch the mode to 'AUX'.
  3. NBT System: If your car has AUX input, use the AUX audio cable to connect 'Audio OUT' to 'Audio IN'.
  4. CCC/CIC System: If your car has AUX input, use the AUX audio cable to connect 'Audio OUT' to 'AUX IN'.

Steps to Enter Original System and Set to AUX Mode:

Setting Original System to AUX Mode
Visual guide for navigating the original car system to activate AUX mode.
  1. Navigate to 'CD/Multimedia'.
  2. Select 'External devices'.
  3. Choose 'AUX front'.
  4. Ensure 'AUX active' is checked and adjust volume as needed.

5. Operating Instructions

5.1 Main Menu Navigation

When the machine is turned on, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. Touch the home icon 🏠 to return to the main interface, and the back arrow ↩ to return to the upper menu.

Main Menu Interface
The main menu provides access to Original Car, Dash, Carplay, and Android Auto functions.

5.2 System Settings

Click 'Settings' on the main menu to access system configurations including language, audio, display, time, reverse camera settings, and system information.

Video demonstrating system settings navigation, including language, time, reverse camera options, and system information.

5.2.1 Display Settings

Adjust brightness for daytime and nighttime, and multimedia, Bluetooth, reverse, and navigation volumes.

5.2.2 Language Settings

Select your preferred OSD language from a wide range of options including English, Chinese, Portuguese, Russian, Spanish, German, French, Korean, Japanese, Italian, and Arabic.

5.2.3 Time Settings

Configure the year, month, day, hours, and minutes. Options for 12H or 24H format are available.

5.2.4 Reverse Camera Settings

Configure original camera settings (AHD720P25HZ, AHD720P30HZ, AHD1080P25HZ, AHD1080P30HZ) and enable/disable Radar Display, Track Display, and Reverse full screen display.

5.2.5 System Information

View system details such as System version, App version, MCU version, Car type, and Canbus information.

5.3 Bluetooth Function

Click 'Bluetooth' on the main interface to enter the Bluetooth application. Pair your mobile phone to enable hands-free calling, music streaming, and contact synchronization.

Bluetooth Functionality
The unit supports Bluetooth for hands-free calls and music streaming.

5.4 Media Playback (Film & Music)

The unit supports playing audio and video files from the system, external SD card, or USB. Compatible formats include AVI, MP4, RMVB, MP3, WAV, and MID. Double-click the screen for full-screen view; touch any area to exit full-screen.

5.5 Instrument Display

Click the instrument icon on the main interface to view a digital dashboard display, showing speed, RPM, fuel level, and temperature.

5.6 Smartphone Connectivity (Carplay, Android Auto, Airplay, Miracast)

The unit supports both wireless and wired Carplay and Android Auto, as well as Airplay and Miracast for screen mirroring.

  • Wireless Carplay Connection Steps:
    1. Turn on Wi-Fi and Bluetooth on your iPhone.
    2. Search and connect to the device "BTXXXX" via Bluetooth on your phone. The PIN code is 0000.
    3. When a pop-up window appears on your phone, tap "Use Carplay".
  • Wired Carplay Connection Steps:
    1. Connect your iPhone to the car's Carplay-specific USB port using an original or high-quality data cable.
  • Android Auto: Connect your Android phone to the unit to use Android Auto features.
  • Airplay/Miracast: For screen mirroring, follow the connection steps provided in the interface.

6. Specifications

FeatureSpecification
Brand NameMEKEDE
Operating SystemLinux
CPUT113 (Dual-core Cortex-A7)
RAM256MB
Display Size10.25 inch
Resolution1920x720
Color Depth24bit
Touch ScreenCapacitive screen
WiFiDual mode 2.4G/5G, IEEE 802.11b/g/n
BluetoothV2.1 + EDR
Video Playing1080p@30fps/50Mbps (H.264)
USB Connector2 way, USB2.0
Original InputBuilt-in Analog input all the way
OSD LanguageMulti-language support (Chinese, English, Portuguese, Russian, Spanish, German, French, Korean, Japanese, Italian, Arabic, etc.)
Working VoltageDC 12V (range: 9V~16V)
Max Working Current3A
Item Weight1.5kg
Operating Temperature-20°C ~ +70°C
Storage Temperature-30°C ~ +85°C
CertificationCE

7. Troubleshooting

7.1 Frequently Asked Questions

  1. Problem: No response to key operation (protocol failure), abnormal display, flower screen.
    Reason: Model setting is not correct.
    Solution: Enter the factory Settings to set the correct model.
  2. Problem: No Bluetooth function.
    Reason: There is no Bluetooth pairing and connection with mobile phone.
    Solution: Enter the Bluetooth Settings and check the machine name and password.
  3. Problem: No video display on the dashcam.
    Reason: The type of dashcam is not chosen correctly.
    Solution: In system Settings -> Factory Settings -> ARM related Settings -> Dashcam Settings, select the correct dashcam type.
  4. Problem: No display when reversing.
    Reason: Wrong choice of reversing camera.
    Solution: Enter the Settings inside the reversing Settings, choose the original car or rear-mounted camera.

7.2 Display Issues: No Signal or Flashing Screen

If the OEM menu shows symptoms like "No Signal" or a flashing/distorted display, check the LVDS connector and set the original menu resolution.

How To Set The Resolution for Display Issues
Visual guide for troubleshooting display issues and setting resolution.

How To Set The Resolution:

  1. Go to Settings -> Factory Settings.
  2. Enter Code: 8866.
  3. Select the original car's models and screen size.
  4. Select the correct resolution one by one until the display is clear.

If your original system doesn't show up or is flashing, ensure the display screen of the original car corresponds to the selected option, otherwise the display quality will be poor.

7.3 Wireless Carplay Connection Troubleshooting

If you experience issues with wireless Carplay connection:

  1. Delete the paired car Bluetooth record on your phone.
  2. Go to your car's Bluetooth settings and delete the paired phone record.
  3. Restart both your car and phone, then try to reconnect.

8. User Tips

  • Regular Updates: Check for firmware updates to ensure optimal performance and access to new features.
  • Screen Cleaning: Use a soft, lint-free cloth to clean the screen. Avoid harsh chemicals.
  • USB Media: For best performance, use high-quality USB drives for media playback.
  • Bluetooth Pairing: If you have trouble pairing, ensure both devices are in pairing mode and try restarting them.
  • Navigation Accuracy: For optimal GPS accuracy, ensure your car has a clear view of the sky.

9. Warranty and Support

This product comes with a 1-year factory warranty (accessories not included). For any issues or inquiries, please contact MEKEDE customer service. You may also request navigation updates or new firmware if available.

For further assistance, you can refer to the user manual PDF: View User Manual (PDF)

© 2023 MEKEDE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.