1. Introduction
Thank you for purchasing the Tuya Zigbee Mini DIY Smart Switch Module. This device allows you to transform traditional switches and appliances into smart, app-controlled devices, enhancing your home automation experience. This module requires a Zigbee gateway (hub) to function and connect to your smart home ecosystem.
Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Safety Information
WARNING: Risk of Electric Shock!
- Power Isolation: ALWAYS shut off the main AC power supply at the circuit breaker before performing any wiring, installation, or maintenance to prevent electrical shock.
- Professional Installation: If you are unsure about electrical wiring, consult a qualified electrician.
- Dry Contact Only (S1/S2 Terminals): The S1 and S2 terminals are designed ONLY for connection to the two ends of a mechanical wall switch (dry contact).
- DO NOT connect S1 and S2 to strong high-voltage power sources such as Live (L) or Neutral (N) lines. Doing so will permanently damage the device and pose severe safety hazards.
- Ensure all connections are secure and insulated to prevent short circuits.
- Do not operate the device if it is damaged or has exposed wires.
3. Product Features
- Zigbee 3.0 Protocol: Reliable and efficient wireless communication.
- Ultra-Compact Design: Fits easily into most standard junction boxes.
- App Remote Control: Control connected devices from anywhere via your smartphone.
- Smart Timing & Scheduling: Create personalized, automated routines.
- Voice Control: Compatible with Amazon Alexa, Google Home, and Yandex Alice (requires a Zigbee 3.0 gateway built into the voice assistant or a compatible hub).
- Group Control: Control multiple switches simultaneously by grouping them in the app.
- Two-Way Control Support: Connect dual parallel or series switches for flexible control.
- Third-Party Platform Integration: Compatible with zigbee2mqtt via Home Assistant for advanced users.
- Zigbee Router Function: Extends your Zigbee network signal.

4. Specifications
4.1. Ultra Mini Smart Switch (ZG-301ZB Series)
| Parameter | Specification |
|---|---|
| Wireless Protocol | Zigbee 3.0 |
| Working Temperature | -10°C ~ 55°C |
| Working Humidity | 0 ~ 99%RH |
| Material | ABS |
| Module Size | 39 * 31 * 18.5mm |
| Input Voltage | AC 110~240V 50/60Hz |
| Max Current (1CH ZG-301ZB) | 10A 240V AC |
| Rated Power (1CH ZG-301ZB) | 2200W |
| Max Current (2CH/3CH ZG-301ZB) | 5A/Gang 240V AC |
| Rated Power (2CH/3CH ZG-301ZB) | 1000W/Gang |
4.2. Mini Smart Switch (ZG-301Z Series)
| Parameter | Specification |
|---|---|
| Wireless Protocol | Zigbee 3.0 |
| Working Temperature | -10°C ~ 55°C |
| Working Humidity | 0 ~ 99%RH |
| Material | ABS |
| Module Size | 40 * 40 * 20mm |
| Input Voltage | AC 85~250V 50/60Hz |
| Max Current (1CH ZG-301Z) | 16A |
| Load Power (1CH ZG-301Z) | <3500W AC 220V/16A |
| Output (2CH ZG-301Z) | AC 85~250V 50/60Hz 10A/Gang |
| Load Power (2CH ZG-301Z) | <3500W AC 220V/16A |


5. Setup
5.1. Wiring Installation
Before you begin, ensure the main power supply is OFF at the circuit breaker.
- Identify the Live (L) and Neutral (N) wires from your mains supply.
- Identify the Live (Lout) and Neutral (Nout) wires going to your lamp or appliance.
- If connecting to a traditional wall switch, identify the two wires from the switch for S1 and S2 terminals.
- Connect the wires according to the markings on the device cover and the diagrams below.
- Ensure all wire connections are tight and properly insulated.
- Once wiring is complete, restore power at the circuit breaker.


5.2. Network Configuration & Pairing
This device requires a Zigbee gateway (hub) to connect to your smart home network.
- Power On: Ensure the smart switch module is correctly wired and powered on.
- Enter Pairing Mode: Press and hold the physical button on the device for approximately 3 seconds. The LED indicator on the module will flash rapidly, indicating it has entered network discovery (pairing) mode.
- App Discovery: Open your preferred Smart Home App (e.g., Tuya Smart, Smart Life, Home Assistant).
- Add Device: Navigate to your Zigbee Gateway settings within the app and select