ESSGOO E72

Contents

ESSGOO 11.3" Portable Carplay Android Auto Driving Recorder

Model: E72

Please read these instructions carefully before use.

1. Introduction

The ESSGOO E72 is an 11.3-inch portable car display system featuring 4K front and 1080P rear dual-lens recording, wireless CarPlay, Android Auto, Mirror Link, GPS navigation, and various audio output options. Designed for easy installation, it enhances your driving experience with smart connectivity and comprehensive safety features.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following:

  • Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
  • Ensure all cables are securely connected and do not obstruct your view or vehicle controls.
  • Avoid exposing the device to extreme temperatures outside its operating range (-20°C to 70°C).
  • Do not attempt to disassemble or modify the device. This may void the warranty and cause damage.
  • Keep the device away from water and moisture.
  • Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Setup

3.1. Package Contents

Verify that all items are present in the package:

Packing List diagram showing all included components.

Image: Packing List. Components include the 11.3" CarPlay Screen, Packaging Box, Soft Silicone Base, Adjustable Suction Cup Bracket, Power Cable, 1080P Rear Camera, Rear Camera Tools, AUX Cable, and User Manual.

  1. 11.3" CarPlay Screen
  2. Packaging Box
  3. Soft Silicone Base
  4. Adjustable Suction Cup Bracket
  5. Power Cable (Cigarette Lighter Power Cable)
  6. 1080P Rear Camera
  7. Rear Camera Tools
  8. AUX Cable
  9. User Manual (this document)

3.2. Product Overview

Familiarize yourself with the main components of the device:

Diagram of the device showing display, power, camera, speaker, bracket knob, fixed base, AUX OUT, TF Card slot, AV IN, and Type-C port.

Image: Product Accessories. Labels indicate the Display, Power input, Camera, Speaker, Bracket knob, Fixed base, AUX OUT port, TF Card slot, AV IN port, and Type-C port.

  • Display: 11.3" Full HD IPS touchscreen for user interaction and content display.
  • Power Input (12V-24V): Connects to the car's cigarette lighter for power.
  • Camera: Integrated front camera for driving recording.
  • Speaker: Built-in speaker for audio output.
  • Bracket Knob: Used to adjust the viewing angle of the display.
  • Fixed Base: Provides stable mounting on the dashboard.
  • AUX OUT: Audio output port for connecting to car's AUX input.
  • TF Card Slot: For Micro SD memory card (up to 1TB, U1, FAT32).
  • AV IN: Input for the rear camera.
  • TYPE-C (5V): Power interface for the device.

3.3. Installation Instructions

The ESSGOO E72 offers two primary installation methods: using the soft silicone base or the adjustable suction cup bracket.

3.3.1. Mounting the Device

Method 1: Soft Silicone Base (Lower Height, Reduced Blind Spots)

  1. Tear off the protective film from the 3M adhesive on the bottom of the soft silicone base.
  2. Place the base directly on the appropriate car center console.
  3. Install and fix the CarPlay unit onto the base.
  4. Adjust the appropriate angle through the bracket knob to facilitate your viewing and operation.

Method 2: Adjustable Suction Cup Bracket (Dashboard or Windshield)

Four-step diagram for installing the adhesive mount: 1. Clean the surface. 2. Attach the mount to the dashboard. 3. Press firmly and let stand for 24 hours. 4. Secure the screen.

Image: Installation of the Adhesive Mount. Steps include cleaning the surface, attaching the mount, pressing firmly for 24 hours, and securing the screen.

  1. Clean the surface of your dashboard or windshield where you intend to mount the device.
  2. Tear off the 3M adhesive film from the suction cup bracket.
  3. Attach the mount to the cleaned surface. Press firmly and allow it to stand for 24 hours to ensure strong adhesion.
  4. Secure the screen onto the bracket.
  5. Adjust the bracket knob to achieve the ideal viewing angle.
Comparison showing the device mounted at an ideal height for better driving visibility versus another device that obstructs view.

Image: Ideal Height, Better Driving Visibility. Demonstrates optimal placement to avoid obstructing the driver's view.

3.3.2. Connecting Power

Diagram showing connection of the car charger cable to the car's power supply and the CarPlay unit via Type-C.

Image: Connecting Power. The car charger cable connects to the car's power supply (12V-24V) and the device's Type-C port (5V).

  1. Connect the car charger cable to the car's power supply (cigarette lighter socket).
  2. Connect the Type-C end of the cable to the Type-C power interface on the CarPlay unit.

3.3.3. Connecting the Rear Camera

Wiring diagram for rear camera installation, showing connections to portable car audio, reverse lights, and the rear camera.

Image: Rear Camera Installation. Shows the rear camera connecting to the AV IN port of the portable car audio, and its red wire connecting to the reversing lamp's positive lead.

  1. Connect the rear camera cable to the AV IN port on the CarPlay unit.
  2. Connect the red wire of the reversing camera to the positive lead of the car's reversing light. This ensures the display automatically switches to the rearview camera when reversing.

4. Operating Instructions

4.1. Basic Operation

  1. Start your car engine. The CarPlay unit will automatically power on and display the main interface.
  2. To enter standby mode: If the device has physical buttons, press a physical button to turn off the screen. If not, click the sun icon in the upper left area of the main menu page. Click once to change it to a moon icon (low brightness mode), and another click will turn off the screen.
Diagram showing manual and automatic brightness adjustment options for the CarPlay display.

Image: Manual | Automatic Brightness Adjustment. CarPlay mode offers two automatic dimming modes (day and night) or manual adjustment via settings.

4.2. Wireless CarPlay (for iPhone)

Steps for connecting Wireless CarPlay for iPhone: 1. Click CarPlay icon. 2. Turn on WiFi and Bluetooth on iPhone. 3. Connect to device named 'ESSGOO-XXXXXX'. 4. Use CarPlay. 5. Wait for connection.

Image: Wireless CarPlay and Android Auto. Shows the connection process for both Apple CarPlay and Android Auto.

  1. On the CarPlay unit, click the CarPlay icon to enter the system connection interface.
  2. On your iPhone (iOS 10 or later), turn on Wi-Fi and Bluetooth.
  3. Connect to the device named "ESSGOO-XXXXXX" in your iPhone's Bluetooth settings.
  4. Follow the prompts to "Use CarPlay" and allow contacts/favorites sync if desired.
  5. Wait approximately 20 seconds for the connection to establish and CarPlay to display on the screen.

4.3. Wireless AirPlay (for iPhone)

Wireless Mirror Link feature showing AirPlay for iOS 10 and later, and Android Cast for Android 11 and later.

Image: Wireless Mirror Link. Illustrates AirPlay and Android Cast functionality.

  1. On the CarPlay unit, click the AirPlay icon to enter the system connection interface.
  2. On your iPhone (iOS 10 or higher), turn on Wi-Fi.
  3. Connect to the device named "ESSGOO-XXXXXX" in your iPhone's Wi-Fi settings. The password is 12345678.
  4. Once connected, enable the screen mirroring function on your iPhone and select the device to mirror to.
  5. Wait approximately 20 seconds for the screen content to be displayed on the CarPlay unit.

4.4. Wireless Android Auto

Steps for connecting Android Auto for Android phones: 1. Click Android Auto icon. 2. Turn on WiFi and Bluetooth on Android phone. 3. Connect to device named 'ESSGOO-XXXXXX'. 4. Allow to Connect. 5. Wait for connection.

Image: Auto for Android. Details the connection steps for Android Auto.

  1. On the CarPlay unit, click the Android Auto icon to enter the system connection interface.
  2. On your Android phone (Android 11 or higher), turn on Wi-Fi and Bluetooth.
  3. Connect to the device named "ESSGOO-XXXXXX" in your phone's Bluetooth settings.
  4. Allow the connection when prompted.
  5. Wait approximately 10-20 seconds for the connection to establish and Android Auto to display on the screen.

4.5. Wireless Android Miracast

Steps for Wireless Miracast Mirroring Connection for Android: 1. Click Android Miracast icon. 2. Turn on Android Miracast interface. 3. Find mobile screen projection function. 4. Click to connect. 5. Wait for connection.

Image: Wireless Miracast Mirroring Connection Steps. Outlines the process for Android screen mirroring.

  1. On the CarPlay unit, click the Android Miracast icon to enter the system connection interface.
  2. On your Android phone (Android 11 or higher), find the screen projection/wireless projection function in your mobile phone system settings.
  3. Connect to the device named "ESSGOO-BTXXXXXX".
  4. Wait approximately 10-20 seconds for the screen content to be displayed on the CarPlay unit.

4.6. Audio Output Modes

Diagram showing four audio output modes: Built-in Speaker, AUX Connected, FM Connected, and Bluetooth Connected Speaker.

Image: 4 Audio Output Modes. Visual representation of how to output audio.

  • Built-in Speaker Mode: Audio plays directly from the device's integrated speaker.
  • Bluetooth Mode:
    1. Open Bluetooth settings on your phone, search for and connect to the car's Bluetooth signal.
    2. The CarPlay/Android Auto software on your phone will transmit audio to the car's speakers via Bluetooth.
  • AUX Mode:
    1. Connect the AUX cable to the AUX port on both the car and the CarPlay device.
    2. Audio will be transmitted from the CarPlay device to the car's speakers through the AUX cable.
  • FM Mode:
    1. Adjust and ensure that the CarPlay device's signal frequency band matches the car's FM signal frequency band.
    2. Audio will be transmitted from the CarPlay device to the car's speakers via FM signals.

4.7. Car Recording

The device supports dual-camera recording (4K front + 1080P rear) with features like loop recording and G-sensor emergency lock.

Diagram illustrating 4K front and 1080P rear recording, including dual cameras, loop recording, wide angle, night vision, G-sensor, and parking assistance.

Image: 4K Front | 1080P Rear. Highlights key recording features.

Icon Function
Recording icon Click to start recording; click again to stop recording.
Playback icon Click to view the playback video.
Camera icon Click to take a photo.
Video and photo playback icon Click to play back video and photos.
Audio toggle icon Click to turn on or off the recording sound.
Camera display layout icon Click to switch the camera display layout.

4.8. Reverse Line Calibration

Diagram showing how to calibrate reverse lines by manually dragging them to align with parking lines.

Image: Reverse Line Calibration. Illustrates adjusting the reversing assist lines.

  1. Park your car in the middle of a parking space.
  2. On the device screen, manually drag the left side of the reversing assist line.
  3. Move it up, left, or right to align the assist line horizontally with the parking line on the left side.

4.9. Tire Pressure Module Setup (Optional)

If you have an optional tire pressure sensor module, follow these steps to set it up:

  1. Prepare the Tire Pressure Sensor Module components.
  2. On the device, click "Settings" then click the tire pressure icon (usually represented by a tire symbol) in the settings menu.
  3. Click on the desired tire location on the screen, then click the pairing button.
  4. Remove the tire valve cap, tighten the hex nut, turn the tire pressure sensor clockwise, and then tighten the hex nut counterclockwise.
  5. After successful pairing, the tire pressure status will be displayed on the main interface.
  6. If the tire pressure exceeds the set alarm value, the system will issue a tire pressure abnormality warning.

5. Maintenance

  • Cleaning: Use a soft, lint-free cloth to clean the screen and body of the device. Do not use liquid or aerosol cleaners.
  • Temperature: Store and operate the device within the specified temperature range (-20°C to 70°C) to prevent damage.
  • Storage: If storing the device for an extended period, ensure it is in a cool, dry place.
  • Firmware Updates: Check the manufacturer's website or app for available firmware updates to ensure optimal performance and new features.

6. Troubleshooting (FAQ)

Q: Which mobile phone system version is this device compatible with?
A: iPhone supports iOS 12 or above, Android phone supports Android 11 or above.
Q: The FM transmitter has poor signal and noise interference?
A: If the FM transmission signal is poor, you need to fix the car radio and plug in the antenna, and organize the wiring harness to avoid interference in the frequency band.
Q: Wireless CarPlay often disconnects or doesn't work?
A: When connecting to CarPlay, do not connect the phone to other wireless networks to avoid CarPlay disconnection.
Q: The bracket is not strong, the suction cup adhesion is insufficient, and it becomes unstable under high temperature?
A: When pasting, ensure that the location is clean and dry to avoid bubbles and prevent unstable adhesion during the application process. (Suggestion: Suction cup mounts are for glass, vertical stands are for center consoles.)
Q: The Bluetooth is out of sync, the caller can't hear the sound or there is noise?
A: Make sure that the device's mic position is not blocked by foreign objects.
Q: Does the rearview camera automatically switch when reversing?
A: If your rearview camera is connected correctly, the vehicle system will typically switch to display the rearview camera automatically when you shift into reverse. When you shift into other gears, it will automatically switch back to other display modes.
Q: No sound from the device?
A: Please confirm whether the FM transmitter function is turned on, because when the FM transmitter function is turned on, the device's built-in speaker will be turned off, and no sound will be emitted.
Q: Does the product consume electricity?
A: This depends on whether the car is started. When the engine is on and the car is started, the cigarette lighter power comes from the generator, not from the battery, so the device's power consumption will not affect the battery.
Q: How to enter standby mode?
A: Turn on the standby mode. If the device has physical buttons, directly press the physical button to turn off the screen. If the device does not have physical buttons, click the sun icon in the upper left area of the main menu page of the device. Click once to turn it into a moon icon (low brightness mode), another click will turn off the screen.
Q: Does it support a memory card?
A: Yes, it supports a Micro SD memory card up to 1TB (U1, FAT32 format).

7. User Tips

  • The screen integrates well with most car interiors, providing a seamless look.
  • The device performs as described, offering reliable functionality for all its features.
  • Consider the product's good quality and value for its price point.

8. Specifications

Attribute Value
Model E72
Brand Name ESSGOO
Display Size 11.3 inches
Display Resolution 1920x720
Recording Resolution 4K (Front) + 1080P (Rear)
Operating System Linux
Wireless Connectivity Wireless CarPlay, Android Auto, AirPlay, Android Cast, Bluetooth 5.3, WiFi (802.11b/g/n, 2.4G & 5G)
Tuner Type FM
Interface USB, AUX, Type-C, Micro SD Card
Memory Card Support Micro SD (MAX 1TB, U1, FAT32)
Power Interface DC 5V/2A, Type-C (rated current: 1.2A, rated power: 6W)
Operating Temperature -30℃ to +65℃ (-22°F to 149°F)
Material Plastic
Certification CE, FCC
OSD Language Chinese (Simplified), Chinese (Traditional), Polish, German, Russian, Finnish, Dutch, Ukrainian, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, English

9. Warranty & Support

The ESSGOO E72 comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For any issues or support, please contact us:

A copy of the EU Declaration of Conformity is available online at https://essgoo.com/pages/doc.

For the full user manual in multiple languages or function operation videos, please refer to the QR codes provided in the original packaging or contact support.

You can also view the PDF user manual here: ESSGOO E72 User Manual (PDF)

10. Regulatory Information

10.1. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

10.2. ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB - 3(B).

10.3. EU Regulatory Compliance

In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.

This product bears the selective sorting symbol for Waste Electrical and Electronic Equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. Users have the choice to give their product to a competent recycling organization. This product can be used across EU member states.

The symbol --- indicates DC voltage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.