1. Introduction
Thank you for choosing the K-Snake X12 Ultra Tri-Mode Wireless Gaming Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your new gaming mouse. Designed for esports, the X12 Ultra features a high-performance PAW3311 sensor, a lightweight design, and versatile tri-mode connectivity to enhance your gaming experience.
2. Safety Information
Please read and follow these safety guidelines to ensure proper use and prevent damage to the device or injury.
- Do not immerse the mouse in liquid or spray it with liquid.
- Avoid using the mouse in environments with high temperatures or high humidity.
- Do not place the mouse near an open flame.
- Do not press the buttons violently or disassemble the mouse.
- Do not use a fast charger to charge the mouse, as this may damage the battery.
3. Package Contents
The K-Snake X12 Ultra package typically includes the following items:
- K-Snake X12 Ultra Gaming Mouse
- Wireless Receiver (USB)
- Charging/Data Cable (Type-C)
- RGB Magnetic Charging Base
- Anti-slip Stickers
- Instruction Manual (this document)
4. Product Overview
Familiarize yourself with the components and functions of your K-Snake X12 Ultra gaming mouse.
Button Functions:
- Left Button: Standard left-click function.
- Right Button: Standard right-click function.
- Roller (Scroll Wheel): Scroll up/down, middle-click.
- Forward Button: Navigates forward in web browsers or applications.
- Back Button: Navigates backward in web browsers or applications.
- DPI Switching Button: Short press to cycle through DPI settings.
- Mode Switch/Switch: Located on the underside, used to switch between connection modes (Wired, 2.4G, Bluetooth).
5. Setup and Connection
The K-Snake X12 Ultra supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.
5.1. Wired Mode Connection
- Connect the provided Type-C charging/data cable to the mouse and to a USB port on your computer.
- The mouse will automatically switch to wired mode and begin charging. The computer should recognize the mouse without additional drivers.
5.2. 2.4G Wireless Mode Connection
- Locate the mode switch on the underside of the mouse and set it to the "2.4G" position.
- Take out the USB wireless receiver from the mouse or packaging.
- Plug the wireless receiver into an available USB port on your computer.
- The computer will automatically install the necessary drivers. Once installation is complete, the mouse should be ready for use.
- If the connection fails, ensure the mouse is in 2.4G mode, then press and hold the code matching button (often the DPI button or a dedicated button on the underside) until the mode light flashes rapidly. The light will turn off after successful pairing.
5.3. Bluetooth Mode Connection
- Locate the mode switch on the underside of the mouse and set it to the "Bluetooth" position. The Bluetooth mode lights (BT1/BT2) will indicate readiness.
- Short press the mode switch button to select the desired Bluetooth channel (BT1 or BT2). The corresponding channel light will flash (e.g., BT1 flashes green, BT2 flashes blue).
- Press and hold the mode switch button for approximately 3 seconds. The selected Bluetooth channel light will flash quickly, indicating pairing mode.
- On your computer or device, enable Bluetooth and search for new devices.
- Select "X12 mouse 1" or "X12 mouse 2" (depending on the channel selected) from the list of available devices to connect.
- Once connected, the pairing light will stay on for about 1 second and then turn off.
6. Operating Instructions
6.1. DPI Adjustment
Use the DPI switching button (usually located behind the scroll wheel) to cycle through different DPI sensitivity levels. The LED display on the mouse will show the current DPI setting.
6.2. RGB Lighting Control
The RGB magnetic charging base features colorful lighting effects. Touch the base to switch between different lighting modes or turn them off.
6.3. Driver Software
For advanced customization, including DPI adjustment, report rate settings, key functions, and macro definitions, download and install the official driver software.
- Driver Website: https://x1d33.yjx2012.com/
6.4. Sleep Mode
- Shallow Sleep: The mouse will enter shallow sleep immediately when inactive. Move the mouse to wake it up.
- Deep Sleep: If there is no operation for 10 minutes, the mouse will enter deep sleep. Press any button to wake it up.
7. Maintenance
To ensure the longevity and optimal performance of your K-Snake X12 Ultra mouse, follow these maintenance tips:
- Cleaning: Use a soft, dry cloth to wipe the mouse surface. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Avoid harsh chemicals.
- Storage: Store the mouse in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. Charge the mouse when the battery indicator is low. Do not use unauthorized chargers.
- Cable Care: Handle the Type-C cable gently. Avoid sharp bends or excessive pulling that could damage the cable or connectors.
8. Troubleshooting
If you encounter issues with your K-Snake X12 Ultra mouse, refer to the following common troubleshooting steps:
- Mouse Not Responding:
- Ensure the mouse is charged.
- Check the connection mode switch (Wired, 2.4G, Bluetooth) is set correctly.
- For 2.4G, ensure the USB receiver is securely plugged into a working USB port. Try a different USB port.
- For Bluetooth, ensure Bluetooth is enabled on your device and the mouse is paired. Try re-pairing the mouse.
- If in deep sleep, press any button to wake it up.
- Connection Issues (2.4G):
- Set the mouse to 2.4G mode.
- Press and hold the code matching button on the mouse until the mode light flashes rapidly. This will re-initiate pairing with the receiver.
- DPI Not Changing:
- Ensure you are pressing the dedicated DPI switching button.
- Check the LED display for feedback on DPI changes.
- If using custom settings, verify them in the driver software.
- RGB Lights Not Working:
- Ensure the magnetic charging base is powered.
- Touch the base to cycle through lighting modes or turn them on/off.
For further assistance, please refer to the official driver software or contact customer support.
9. Specifications
Detailed specifications for the K-Snake X12 Ultra Tri-Mode Wireless Gaming Mouse.
| Feature | Specification (X12 Ultra) |
|---|---|
| Product Model | X12 Ultra |
| Sensor | PAW3311 |
| DPI Range | 800-12000DPI (6 gears) |
| Connection Method | 2.4G Wireless, Bluetooth, Wired (Type-C) |
| Report Rate | 1000Hz (Wired, 2.4G), 125Hz (Bluetooth) |
| Micro Switches | Huanuo 100 million times |
| Battery Capacity | 500mAh |
| Number of Keys | 7 |
| Display | LED Screen Display |
| Product Weight | 68g ±3g |
| Product Dimensions | 125mm (L) x 62mm (W) x 40mm (H) |
| Supported OS | XP, Win7, Win8, Win10, Win11, Mac OS, Android, Linux |
For a comparison of different models (X12, X12 Pro, X12 Ultra), please refer to the following table:
10. User Tips
- Optimize Performance: For competitive gaming, use the 2.4G wireless or wired connection for the lowest latency and highest report rate (1000Hz).
- Battery Management: To maximize battery life, consider using Bluetooth mode for general productivity tasks, as it consumes less power (125Hz report rate).
- Customization: Install the driver software to personalize DPI settings, button assignments, and create macros for a tailored gaming experience.
- Ergonomics: The mouse features a medium to large hand symmetrical mold. Adjust your grip for comfort during long gaming sessions.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty information, please contact the seller or refer to the official K-Snake website. Keep your proof of purchase for warranty claims.
A PDF version of a general user manual (for X11 model) is available for reference: General User Manual (PDF).