HXCONTROLLER GX60A-230VDC

Contents

HXCONTROLLER MPPT Solar Charge Controller

Model: GX60A-230VDC

User Manual

1. Introduction

Thank you for choosing the HXCONTROLLER MPPT Solar Charge Controller. This manual provides essential information for the safe and efficient operation of your solar charge controller. This device is designed to maximize power harvest from your solar panels and efficiently charge various battery types, including lead-acid and lithium batteries, across a wide voltage range (12V to 96V).

HXCONTROLLER MPPT Solar Charge Controller front view with LCD display
Front view of the HXCONTROLLER MPPT Solar Charge Controller, showing the LCD display and control buttons.

2. Features

  • Advanced MPPT Technology: High tracking efficiency up to 98% and peak conversion efficiency of 99%, ensuring maximum power extraction from solar panels, even in cloudy conditions.
  • LCD Display: Clear LCD display for monitoring operating status and conveniently modifying parameters.
  • Large-Section Wiring Ports: Designed with large cross-section and spacing for improved insulation, installation reliability, and reduced voltage drop.
  • Intelligent Fan Heat Dissipation: Temperature-controlled fan adjusts operation based on temperature and charging current for efficient cooling.
  • Wide Battery Compatibility: Supports rechargeable lithium and lead-acid batteries (Sealed, Gel, Flooded, Lithium Iron Phosphate, Ternary Lithium) with automatic voltage detection for 12V to 96V systems.
  • Multi-Stage Charging: Features power tracking, fast charging, and floating charging stages for optimal battery health.
  • Comprehensive Protection: Includes temperature compensation, overcharging protection, over-discharging protection, overload protection, short-circuiting protection, reverse polarity protection, and reverse current protection.
Diagram showing MPPT controller size and efficiency ratings
The controller features advanced MPPT technology with up to 98% tracking efficiency and 99% conversion efficiency.
Icons representing various intelligent charging protections
Intelligent Charging Protection features: Temperature Compensation, Overcharging Protection, Over-Discharging Protection, Overload Protection, Short-Circuiting Protection, Reverse Polarity Protection, Reverse Current Protection.

3. Specifications

The following table details the specifications for various current models of the HXCONTROLLER MPPT Solar Charge Controller:

Parameter30A Model60A Model100A Model120A Model
Maximum PV Open Circuit Voltage230VDC
Charging Current0-40A adjustable0-60A adjustable0-100A adjustable0-120A adjustable
Battery TypeSealed, Gel, Flooded (12V/24V/48V/96V Auto-recognition + adjustable 12V/24V/48V/60V/72V/84V/96V)
Lithium Iron Phosphate Battery12V/24V/36V/48V/60V/72V/84V/96V
Ternary Lithium Battery12V/24V/36V/48V/60V/72V/84V/96V
Maximum Input Power of Solar Panel480W/12V, 960W/24V, 1920W/48V, 2400W/60V, 2880W/72V, 3840W/96V720W/12V, 1440W/24V, 2880W/48V, 3600W/60V, 4320W/72V, 5760W/96V1200W/12V, 2400W/24V, 4800W/48V, 6000W/60V, 7200W/72V, 9600W/96V1440W/12V, 2880W/24V, 57600W/48V, 7200W/60V, 8640W/72V, 11520W/96V
Advanced Setting for Charging Voltage9-136V Adjustable
Charging MethodPower tracking, fast charging, floating charging
Start Charging ConditionPhotovoltaic voltage > battery voltage + 2V
DC Output Current40A
Operating Temperature-10°C to 65°C (Max 65 degree)
Cooling MethodAir Cooling, Fan
Altitude0-3000m
Product Size (L x W x H)262 x 218 x 102mm329 x 268 x 102mm
Gross Weight2.8kg5kg5kg
Detailed parameter table for HXCONTROLLER MPPT Solar Charge Controller
Detailed parameter table for all available models.

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Please follow these steps carefully.

4.1 Safety Precautions

  • Ensure all connections are secure and correct polarity is observed.
  • Disconnect all power sources (solar panels and battery) before installation or maintenance.
  • Install the controller in a well-ventilated area, away from direct sunlight and moisture.
  • Use appropriate wire gauges for all connections to prevent overheating.

4.2 Wiring Diagram and Connection Steps

The following diagram illustrates the correct wiring sequence for your MPPT solar charge controller. Always connect the battery first, then the solar panels.

Wiring diagram showing solar panel connected to MPPT controller, then to battery
Wiring diagram: Connect solar panel to controller, then controller to battery. Note the positive (red) and negative (blue) connections.
  1. Connect the Battery: Connect the battery to the controller's battery terminals. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the battery voltage.
  2. Connect the Solar Panels: Connect the solar panels to the controller's PV terminals. Ensure correct polarity. The controller will begin tracking the maximum power point of the solar array.
  3. (Optional) Connect the Load: If your model supports a DC load output, connect your DC load to the controller's load terminals.

4.3 Battery Type Selection

The controller supports various battery types and can automatically detect the system voltage for lead-acid batteries. For lithium batteries, ensure the correct voltage setting is applied if not automatically detected.

Icons representing compatible battery types: LI, SLD, FLD, GEL, AGM
The controller is compatible with Lithium (LI), Sealed Lead-Acid (SLD), Flooded Lead-Acid (FLD), Gel, and AGM battery types. It supports automatic detection for 12-96V lithium batteries.

5. Operating Instructions

Once installed, the controller will automatically begin operation. The LCD display provides real-time information and allows for parameter adjustments.

5.1 LCD Display Overview

The LCD display shows critical information such as PV voltage, battery voltage, charging current, temperature, and total energy generated. Use the control buttons (SET/Back, UP, DOWN, CONFIRM/OK) to navigate menus and adjust settings.

5.2 Charging Process

The controller employs a multi-stage charging algorithm:

  • Power Tracking: The MPPT algorithm continuously adjusts to find the maximum power point of the solar array.
  • Fast Charging: Delivers maximum current to quickly charge the battery.
  • Floating Charging: Maintains the battery at a full state of charge by providing a small, constant voltage.
Diagram illustrating the 4-stage charging process from controller to battery
The controller utilizes a 4-stage charging process for rapid, efficient, and safe battery charging.

5.3 Parameter Adjustment

Refer to the on-screen menu for specific parameter settings. Generally, you can adjust:

  • Battery type (if not auto-detected or for specific lithium profiles).
  • Charging voltage limits (adjustable from 9-136V).
  • Load control settings (if applicable).

Always consult the detailed on-screen menu for precise instructions on modifying parameters.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller.

  • Cleaning: Periodically clean the controller's exterior with a dry cloth. Ensure the LCD screen is clear for readability.
  • Ventilation: Ensure the intelligent cooling fan and ventilation openings are free from dust and obstructions. A clean fan ensures efficient heat dissipation.
  • Connections: Annually check all wiring connections for tightness and corrosion. Loose connections can lead to power loss or overheating.
  • Environment: Ensure the operating environment remains within the specified temperature range (-10°C to 65°C) and free from excessive moisture.

7. Troubleshooting

This section addresses common issues you might encounter with your solar charge controller.

7.1 Common Issues and Solutions

  • No Display/Controller Not Powering On:
    - Check battery connections and ensure the battery has sufficient voltage.
    - Verify that the battery polarity is correct.
  • No Charging Current:
    - Check solar panel connections and ensure they are receiving sunlight.
    - Verify solar panel polarity.
    - Ensure PV voltage is greater than battery voltage + 2V for charging to initiate.
    - Check for any shading on solar panels.
  • Low Charging Efficiency:
    - Ensure solar panels are clean and optimally angled towards the sun.
    - Check for proper ventilation around the controller; overheating can reduce efficiency.
    - Verify battery health and capacity.
  • Error Codes on LCD:
    - Consult the on-screen display for specific error code meanings. Common errors relate to over-voltage, under-voltage, or short circuits. Address the underlying issue as indicated.

7.2 Safety Protections

The controller is equipped with multiple safety features. If a protection mechanism is triggered (e.g., overcharge, short circuit), the controller may temporarily stop charging or disconnect the load. Identify and resolve the cause of the protection trigger before resuming normal operation.

8. User Tips

  • Cloudy Day Performance: Users have reported that the controller charges well even on cloudy days, highlighting its efficient MPPT technology.
  • System Sizing: Always ensure your solar panel array's maximum open circuit voltage (Voc) does not exceed the controller's maximum PV voltage (230VDC) and that the total power is within the controller's limits for your battery voltage.
  • Battery Voltage Setting: While the controller offers auto-recognition, double-check the battery type and voltage settings, especially for lithium batteries, to ensure optimal charging profiles.

9. Warranty and Support

For warranty information and technical support, please refer to the seller's specific terms and conditions or contact the HXCONTROLLER customer service directly. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.