Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
⚠️ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
Product Overview
The Intelamp Solar Street Flood Light is designed for outdoor use, providing powerful and efficient illumination for gardens, yards, and other outdoor spaces. It features a high-capacity battery, a large solar panel for efficient charging, and advanced motion sensing capabilities.
Key Features:
- High-Capacity Battery: Equipped with a 20,000mAh LiFePO4 battery for extended runtime and enhanced safety.
- Large Solar Panel: Features a 20W Topcon solar panel (5V/4000mA) with up to 24% solar conversion efficiency, ensuring faster charging.
- Ultra-Bright Illumination: Provides up to 4000 lumens (equivalent to a 300-watt bulb) in sensor mode with 210 high-quality LED beads (6500K White Daylight). Continuous light mode offers 1600 lumens.
- Wide-Angle Coverage: Three light panels deliver 180° wide-angle lighting, covering up to 3000 sq ft.
- Dual Motion Sensors: Two motion sensors provide wider sensing of people coming and going.
- Synchronizable Lights: Multiple Intelamp lights can be linked together for coordinated lighting across a larger area.
- Remote Control: Includes a remote control with a 5-meter range for easy adjustment of lighting duration, modes, and brightness levels. Features a memory function to retain settings.
- Durable Design: IP65 protection level, suitable for various weather conditions.
Setup & Installation
1. Preparation
- Remove all protective films from the solar light casing and solar panel.
- Ensure the solar panel is unobstructed and free of stains for optimal charging.
- Install or place the light fixture in a well-lit, unobstructed location.
- Recommended installation height is between 1.8 to 2.5 meters (approximately 6 to 8 feet).
2. Installation Methods
The Intelamp Solar Street Flood Light offers two primary installation methods: Pole Mount and Wall Mount. A 5-meter long cable connects the solar panel to the light fixture, allowing flexible placement of the solar panel in the sunniest spot.
All necessary accessories for secure installation on a wall or pole are included.
Operation
1. Charging
No manual charging is required. Place the solar panel in direct sunlight; it will automatically absorb sunlight and store electrical energy in the 20,000mAh battery. Approximately 5 hours of direct sunlight can provide 12+ hours of all-night illumination. Actual duration depends on weather and sunlight intensity.
2. Power On/Off
Locate the power switch on the side/bottom of the light fixture. Switch it to the "ON" position to turn it on. For models supporting a light-controlled mode, switch it to the "Auto" position. The light fixture will automatically turn on after dark and turn off at dawn.
3. Lighting Modes & Remote Control
Use the provided remote control to manage the light's functions. The remote has a range of up to 5 meters.
- Power (ON/OFF): Turns the light on or off.
- Sensor Mode: A short press of the mode button cycles through sensor modes. In sensor mode, the light automatically turns on when it detects human activity. It turns off after a 30-second delay when no one is around, making it more energy-efficient. You can set the high brightness time after induction to 30 seconds, 3 minutes, or 10 minutes.
- Sensor Mode 1: When motion is detected, the light brightens to 4000LM for 30s/3m/10m, then dims to 400LM.
- Sensor Mode 2: When motion is detected, the light brightens to 4000LM for 30s/3m/10m, then turns off (0LM).
- Lighting Mode: Automatically lights up for a set duration at night. Options include 2 hours, +1 hour (adds 1 hour to current setting), or 6 hours. You can also set it to Dim or Off after the programmed lighting.
- Lighting Mode 3: Automatically brightens to 2000LM at dusk, then dims to 400LM until dawn.
- Lighting Mode 4: Automatically brightens to 2000LM at dusk, then turns off (0LM) until dawn.
- Brightness Adjustment: Adjust the brightness to 60%, 80%, or 100%.
The remote control features a memory function, so your last settings are retained for subsequent use.
4. Synchronizable Solar Sensors
The system supports linkable solar sensors. If a remote sensor is installed at the entrance to your yard and the main light fixture is installed inside, the light will automatically turn on as soon as motion is detected, even before you arrive. Multiple Intelamp lights can be synchronized together for coordinated lighting across a larger area.
Video demonstrating the Intelamp Solar Street Flood Light's features, including its wide-angle illumination and dual motion sensors.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | intelamp |
| Model Number | YL005-13P10 |
| Power Source | SOLAR |
| Voltage | 5V |
| Light Source | LED bulbs |
| Battery Capacity | 20000mAh LiFePO4 |
| Solar Panel | 20W Topcon (5V/4000mA) |
| Brightness (Sensor Mode) | 4000LM |
| Brightness (Continuous Mode) | 1600LM |
| Color Temperature | 6500K White Daylight |
| Illumination Angle | 180° Wide Angle |
| Illumination Range | Up to 3000 sq ft |
| Protection Level | IP65 |
| Body Material | ABS |
| Installation Method | Self-contained (Pole Mount, Wall Mount) |
| Is Dimmable | Yes |
| Is Batteries Included | Yes |
| Is Bulbs Included | No (LEDs are integrated) |
| Warranty | 2 Years |
| Certification | LVD, GS, FCC, UL, ROHS, CE |
Maintenance
- Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may reduce charging efficiency. Ensure the light fixture and sensors are also clean.
- Inspection: Periodically check the light fixture and solar panel for any physical damage or loose connections.
- Battery Care: The integrated LiFePO4 battery is designed for long life. Avoid prolonged storage in extreme temperatures.
Troubleshooting
- Light not turning on at night:
- Ensure the power switch is in the "ON" or "Auto" position.
- Verify the solar panel is receiving sufficient direct sunlight (at least 5 hours) during the day.
- Check if the solar panel is clean and free of obstructions.
- Confirm the light is not installed in an area with strong ambient light at night, which might prevent it from activating.
- Light not detecting motion:
- Ensure the motion sensors are clean and unobstructed.
- Check the remote control settings to ensure the sensor mode is active and configured correctly.
- Verify the installation height is within the recommended range (1.8-2.5 meters) for optimal sensor performance.
- Remote control not working:
- Ensure there are no obstructions between the remote and the light fixture.
- Check the remote's battery and replace if necessary.
- Ensure you are within the 5-meter operating range of the remote.
User Tips
- For optimal performance, especially during winter or cloudy days, consider using the sensor mode to extend the lighting time.
- When installing, aim the solar panel directly towards the sun's path for maximum charging efficiency.
- Utilize the synchronizable feature to create a seamless lighting experience across your property, enhancing both visibility and security.
Warranty & Support
This product comes with a 2-year warranty from the date of purchase.
Manufacturer Information:
Shenzhen Jindian Electronic Technology Co., LtdNo. 9, Tianyang 1st Road, Datianyang Industrial Zone, Dongfang Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province, China
Email: service@intelamp.com
EU Authorized Representative:
SUCCESS COURIER SLCALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com
For further assistance or warranty claims, please contact the manufacturer or your local distributor.
Compliance Information
This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Our company has assessed the requirements and regulations applicable to this product based on its actual product type, function, and target market. The product meets the testing requirements of Shenzhen BCTC.
CE
The CE marking indicates compliance with EU health, safety, and environmental protection legislation.
A user manual (PDF) is available for download. Reference: User manual (PDF)