1. Safety Precautions
WARNING: Please read all instructions carefully before using the product. Failure to follow the safety warnings and guidelines may result in electric shock, fire, serious injury, or damage to the vehicle.
- Do not modify or repair: Never attempt to disassemble, repair, or modify the charger components by yourself. Contact qualified service personnel for assistance.
- Inspect before use: Do not operate the charger if the enclosure, cable, or plug is cracked, frayed, broken, or shows any signs of damage.
- Proper grounding: Ensure that the power outlet used is correctly grounded, properly installed, and complies with local electrical standards and regulations.
- Operating environment: Do not submerge the smart control box in water. Avoid exposing the unit to severe weather conditions such as heavy downpours, blizzards, or direct lightning risks.
- Keep away from children: This device is not a toy and must be kept strictly out of reach of children.
Image: Diagram illustrating the multiple protection functions of the charger, including Leakage, Short circuit, Overheating, Overvoltage, Overcurrent, Undervoltage, Lightning, and CP abnormality protection.
2. Product Overview
This portable EV charger is designed to offer a convenient, safe, and plug-and-play charging experience. The system is comprised of three primary sections:
- Grid-Side Power Plug: Available in Schuko, CEE 3-pin, or CEE 5-pin depending on the maximum rated capacity.
- Smart Control Box: Features a built-in heavy-duty LCD screen to monitor real-time metrics.
- Vehicle Connector: Standard ergonomic Type 2 (IEC 62196-2) female charging gun.
LCD Display Features
The integrated display provides immediate, precise tracking of the current charging cycle, displaying:
- Current Power (kW): The real-time electrical output being delivered to the vehicle.
- Voltage (V) & Amperage (A): Active grid voltage and precise current draw monitoring.
- Charged Energy (kWh): Accumulative energy (kilowatt-hours) delivered during the active session.
- Temperature (°C): Continual thermal readout of the control box internal circuitry.
- Status Indicators: Real-time process sequence tracking (Ready / Charging / Fault / Complete).
Image: The smart control box displaying options for adjustable current (6A, 8A, 10A, 13A, 16A) and flexible delay start (1-10 hours), along with status indicators for operation, connection, grounding, and error reports.
3. Setup and Installation
The Junsun Portable EV Charger is designed for plug-and-play operation. No complex installation is required.
Compatibility
This charger is compatible with most Type 2 EVs and PHEVs. It supports both Type 2 and CCS2 connectors.
Image: Visual representation of the charger's compatibility with various EV brands (e.g., Volkswagen, Tesla, BMW, Mercedes-Benz, Audi, Volvo, MG) and Type 2 / CCS2 connectors.
Cable Length Options
The charger is available with various cable lengths, including 4m, 5m, and 8m, to suit different driveway and parking configurations.
Image: Diagram illustrating the total length of a 5-meter charging cable, detailing the lengths of the vehicle connector, control box, and power plug sections.
4. Operating Instructions
How to Start Charging
- Connect to Power Grid: Insert the power plug firmly into an appropriate wall receptacle or distribution socket. The LCD screen will initialize and display the "Ready" status.
- Adjust Amperage (If Applicable): For models equipped with current selection capability, press the adjustment toggle on the control box before inserting the gun into the vehicle to cycle through current limits (e.g., 8A/10A/13A/16A/32A).
- Connect to Vehicle: Open your Electric Vehicle's charging port and insert the Type 2 gun firmly until you hear a mechanical click, indicating a locked physical connection.
- Charging Initiation: The charger automatically negotiates communication handshakes with the vehicle's onboard charger (OBC). Once successful, the display state changes to "Charging".
Image: Illustration of smart charging features, including adjustable current settings (6A, 8A, 10A, 13A, 16A) and schedule charging options (1-10 hours) to optimize charging times and costs.
How to Stop Charging
- Terminate Session via Vehicle: Unlock the vehicle or stop charging through your car's central dashboard media screen/application.
- Disconnect Charging Gun: Safely remove the Type 2 connector from the car inlet port.
- Disconnect Power Source: Remove the power plug from the wall receptacle or grid outlet.
- Storage: Re-apply the protective rubber cap over the Type 2 interface and coil the cable naturally without tightly binding or twisting it. Store in a cool, dry area.
5. Maintenance
- Regular Inspection: Periodically inspect the charger, cables, and plugs for any signs of wear, damage, or fraying. Do not use if damage is found.
- Cleaning: Clean the exterior of the control box and cables with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is disconnected from power before cleaning.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent kinks or damage.
- Environmental Conditions: The charger is designed for all-weather use with an IP65 rating, making it waterproof and dustproof. It operates effectively in temperatures from -25°C to +55°C.
Image: The EV charger shown operating reliably in rain, snow (-25°C), and hot weather (55°C), highlighting its IP65 waterproof and dustproof rating and wide operating temperature range.
6. Troubleshooting Guide
The smart internal chip monitors for anomalies. If a protective trip occurs, the screen will indicate a specific code. Please check below for general resolutions:
- Over / Under Voltage Protection: The source grid voltage fluctuates outside acceptable limits. Wait until grid conditions normalize or inspect the primary breakers.
- Over Current Protection: The vehicle has drawn more current than configured. Unplug the system, perform a complete restart, and check vehicle configuration settings.
- Over Temperature Protection: The internal control box temperature has crossed safe operating limits. Move the module away from direct solar radiation or hot areas and allow it to cool down naturally.
- Leakage Protection: Active residual current detection safeguards. Immediately isolate the device and check for electrical integrity across the vehicle socket and power plug lines.
Image: Detailed diagram illustrating the 8-fold comprehensive protection features, including Over-voltage, Under-voltage, Over-current, Over-temperature, Lightning/Surge, Short-circuit, Leakage Protection (AC 30mA + DC 6mA), and Grounding Protection / PE Detection.
7. Product Specifications
| Specification | 3.5kW Model | 7.4kW Model | 11kW Model | 22kW Model |
|---|---|---|---|---|
| Input / Output Voltage | 230V AC (1-Phase) | 230V AC (1-Phase) | 400V AC (3-Phase) | 400V AC (3-Phase) |
| Maximum Current | 16A | 32A | 16A | 32A |
| Frequency | 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz |
| Charging Interface | Type 2 (IEC 62196-2) | |||
| IP Protection Rating | IP65 | |||
| Operating Temperature Range | -25°C to +55°C | |||
| Compliance Marks | CE, RoHS | |||
| Touchscreen | Yes | |||
| Wireless Support | No | |||
| Cable Length | 4m, 5m, 8m (Optional, depending on model) | |||
| Charger Type (Grid-Side Plug) | Schuko, CEE Blue, CEE Red (Optional, depending on model) | |||
Image: Table illustrating the different power outputs (3.5kW, 7.4kW, 11kW, 22kW) and their corresponding grid-side plug types (Home Socket, Blue Socket, Red Socket) with voltage and current ratings.
8. User Tips
- The charger is generally easy to use and intuitive, making the charging process straightforward.
- The device is designed to remain cool during the charging process, ensuring safe operation.
- Consider the available cable length options (4m, 5m, 8m) to best suit your parking and power outlet location.
- Utilize the schedule charging feature to take advantage of lower off-peak electricity prices, saving on your electricity bill.
Image: The EV charger connected to a vehicle, demonstrating its precision control and smart monitoring capabilities, with a timeline showing how to save money by charging during off-peak hours.
9. Frequently Asked Questions (FAQ)
- Q: Are there options for shorter cables with a Schuko plug?
- A: Yes, the Junsun Portable EV Charger is available with various cable lengths, including 4m, 5m, and 8m, and different plug types such as Schuko, CEE Blue, and CEE Red. Please check the specific model configurations for available options.
10. Environmental Protection & EU Compliance
This product fully complies with all legal directives and standards set forth by the European Union.
- CE Marking: Confirms alignment with EU health, safety, and environmental protection protocols.
- RoHS Compliance: Ensures the restriction of hazardous substances in electrical and electronic equipment.
- WEEE Directive: This unit must not be disposed of with ordinary household trash. Please recycle responsibly through an authorized local collection center for electronic waste.
11. Additional Resources
For a detailed user manual in PDF format, please refer to the official document: Junsun Portable EV Charger User Manual (PDF).