Introduction
Thank you for choosing the POPDEER PD-JA3 4-in-1 Jump Starter. This versatile device combines a powerful jump starter, a portable air compressor, a USB power bank, and an LED flashlight, designed to provide reliable assistance for your vehicle and other needs. Please read this manual carefully before use to ensure proper operation and safety.

Figure 1: POPDEER PD-JA3 Jump Starter and included accessories.
Package Contents
Please check the package for the following items:
- 1 x POPDEER PD-JA3 Jump Starter with Air Compressor
- 1 x Smart Jumper Cable (Battery Clip)
- 1 x USB-C Charging Cable
- 1 x Pump Hose (Trachea)
- 4 x Air Nozzles (Air Tap)
- 1 x Small Storage Box
- 1 x User Manual

Figure 2: All components included in the package.
Specifications
| Feature | Specification |
|---|---|
| Brand | POPDEER |
| Model | PD-JA3 |
| Peak Current | 5000A |
| Input | Type-C (5V/2A, 9V/2A) |
| Output | 5V/2.1A |
| Max Inflation Pressure | 150 PSI |
| Discharge Temperature Range | -20°C to +60°C |
| Charging Temperature Range | 0°C to +40°C |
| Dimensions (L x W x H) | 196.8 x 49.3 x 108.1 mm |
| Weight | 1.3 kg |
| Battery Terminal Configuration | Others |
| Portable | Yes |
| Material | Plastic |
| Start-stop battery compatible | Yes |

Figure 3: Detailed product specifications.
Setup and Initial Charging
Device Overview
Familiarize yourself with the device's buttons and ports:

Figure 4: Product function detail diagram.
- Digital display screen
- Preset pressure reduction key (-)
- LED lighting button
- Preset pressure plus key (+)
- Mode/unit switch button (M)
- Power/Start gas button (Power icon)
- Air pump interface
- Start output (for jumper cables)
- USB Output (5V/2.1A)
- Type-C Input (5V/2A, 9V/2A)
- LED light (Flashlight)
Initial Charging
Before first use, fully charge the device.
- Connect the USB-C charging cable to the Type-C Input port (10) on the jump starter.
- Connect the other end of the USB-C cable to a 5V/2A (or higher) USB charger (not included).
- The digital display screen will show a flashing power icon and the "IN" icon will be steady, indicating charging is in progress.
- The device is fully charged when the battery indicator shows 4 steady bars and stops flashing.
- The device will power off automatically after 10 seconds once fully charged.
Important: Do not charge the product in environments below 0°C or above 45°C.
Operating Instructions
1. Jump Starting a Vehicle
Ensure the jump starter has at least 3 bars of power before attempting to jump start.
- Insert the smart clip plug of the jumper cables into the Start Output port (8) on the jump starter.
- Connect the red clamp of the smart jumper cable to the positive (+) terminal of your vehicle's battery.
- Connect the black clamp of the smart jumper cable to the negative (-) terminal of your vehicle's battery.
- Once the green light on the smart clip is steady, start your vehicle's engine within 30 seconds.
- After the vehicle starts, remove the jump starter device within 30 seconds.
- Then, disconnect the smart jumper cable clamps from the vehicle battery terminals.
- Finally, unplug the smart clip from the jump starter device.
If the vehicle does not start:
- Disconnect the jump starter from the smart clip and the battery.
- Wait for 1 minute.
- Repeat the jump-starting procedure from step 1.
Intelligent Clamp Strength Starting Function: If the smart clamp does not recognize the battery connection (no green light), disconnect the device and battery, re-insert the smart clip, then long-press the "strong start" button on the side of the smart clip. Once the green light is steady, connect to the battery and start the car within 30 seconds.

Figure 5: Jump starting a vehicle. Compatible with 10L gas and 8L diesel engines.

Figure 6: Vehicle compatibility for 12V systems.
2. Using the Air Compressor (Tire Inflator)
- Connect the pump hose (trachea) to the Air Pump Interface (7) on the jump starter and tighten it securely.
- Attach the appropriate air nozzle to the pump hose for the item you wish to inflate.
- Press the Power/Start gas button (6) to turn on the device.
- Press the Mode/unit switch button (5) to cycle through inflation modes: Car, Motorcycle, Bicycle, Basketball, or Custom.
- Use the Preset pressure plus key (4) (+) and Preset pressure reduction key (2) (-) to set the desired pressure.
- Press the Power/Start gas button (6) again to start inflation.
- The compressor will automatically stop once the preset pressure is reached.
- To manually stop inflation, press the Power/Start gas button (6) or the Mode/unit switch button (5).
Air Nozzle Accessories:
- American long plastic inflatable mouth: For balloons, swimming rings, inflatable boats, air cushions, yoga balls.
- American short plastic inflatable mouth: For balloons, swimming rings, inflatable boats, air mattresses, yoga balls.
- Metal ball needle: For basketball, football, volleyball.
- French mouth to beautiful mouth: For some road bikes, mountain bikes.

Figure 7: Using the 150 PSI portable air compressor.
3. Using as a Power Bank (USB Output)
- Short press the Power/Start gas button (6) to turn on the device.
- Connect your mobile phone, PSP, MP3/MP4, tablet, or other digital device to the USB Output port (9) using a compatible USB charging cable.
- The device will begin charging your external device. The display will show the remaining power of the jump starter.
4. Using the LED Flashlight
- Short press the Power/Start gas button (6) to turn on the device.
- Long press the LED lighting button (3) to turn on the LED light (11).
- Short press the LED lighting button (3) to cycle through lighting modes: Long Light, SOS, Flash.
- Long press the LED lighting button (3) again to turn off the LED light.
5. Tire Pressure Detection
- Connect the air pipe to the Air Pump Interface (7) and tighten it.
- Connect the other end of the air pipe to the tire valve.
- Press the Power/Start gas button (6) to turn on the device.
- The digital display screen (1) will show the current tire pressure.
6. Automatic Shutdown
If the connected gas pipe has no air pressure or the machine has no output, the device will enter sleep mode and shut down automatically after 20 seconds.
Maintenance and Storage
- Charging: For long-term storage, it is recommended to maintain a certain battery power and charge the product at least once every three months to prolong battery life.
- Cleaning: Do not scrub the device with rough chemicals, such as soap or other cleaners containing strong alkali and acid. Use a soft, dry cloth for cleaning.
- Storage: Store the device in a cool, dry place away from direct sunlight, flammable and explosive materials, and high-temperature heat sources.
- Heat Dissipation: Ensure good ventilation around the product during use. Do not plug the heat dissipation holes.
- Disassembly: Non-professional personnel should not disassemble the machine to avoid damage or safety accidents.
- Disposal: Do not litter or burn waste battery products. Dispose of the product and its battery according to local regulations.
- External Devices: When not in use, remove all external devices to reduce power loss.
Troubleshooting and Error Codes
The device may display error codes on the digital screen to indicate specific issues:
- "E1": Low-temperature charging protection. Unplug the charger and continue use after the device warms up and protection is removed.
- "E2": High-temperature charging protection. Remove the charger and continue use after the device cools down and protection is removed.
- "E3": High-temperature discharge protection. Disconnect electrical equipment and continue use after the device cools down and protection is removed.
- "E7": Cylinder over-temperature protection (during inflation). Do not touch the machine or air pipe immediately. Wait 10-15 minutes for the device to cool down before continuing operation.
Smart Clip Indicators:
- Green Light (steady): Ready to jump start.
- Red Light (steady): Jump start failed or polarity reversed. Disconnect and re-check connections. If polarity is reversed, the smart clip will also emit a "drip drip" sound.
User Tips
- This device is highly compact and versatile, making it a useful tool for various emergencies.
- When inflating tires, be aware that there might be a slight measurement deviation (e.g., 0.05 bar). It's always good practice to double-check with a separate tire gauge if extreme precision is required.
- Ensure the device is adequately charged before long trips to be prepared for any vehicle battery or tire issues.
Safety Warnings
Please read and follow all safety precautions carefully to prevent injury or damage to the device.
- Keep a safe distance from the engine when jump starting to avoid injury from rotating parts.
- Do not hold the vehicle's ignition key for more than 3 seconds. If the car doesn't start, release the key and try again after a short pause.
- Allow at least a 1-minute interval between continuous jump start attempts.
- Disconnect the jump starter from the vehicle within 30 seconds after a successful start.
- The car starting outlet (8) is exclusively for connecting the smart jumper cable. Do not connect other loads.
- Never short-circuit the positive and negative terminals of the smart clip, or connect them in reverse polarity to the car battery (unless using the strong start function with caution).
- Do not charge the jump starter immediately after jump starting a vehicle. Wait for at least 30 minutes for the battery to cool down.
- Do not charge or use the product in environments below 0°C or above 45°C.
- If continuously pumping air for more than 10 minutes, stop for 10 minutes to allow the device to cool down.
- The intelligent protection relies on detecting battery voltage. Do not connect the clips if the car battery line is removed or the battery is damaged with no voltage, as this may damage the car circuit or the jump starter.
- Do not intentionally or unintentionally short-circuit the jump starter's output terminals, and do not store it with metal objects or sharp objects.
- Children must be supervised by parents and strictly follow the instructions when using this product.
- Slight warming of the device during use or charging is normal.
- Ensure good ventilation and do not block heat dissipation holes. Avoid using in wet places or where water spills easily, or where it can easily fall.
- Avoid environments with vibration, corrosion, dust, or chemical gas hazards.
- Do not touch the metal head of the gas pipe directly with your hands or body after prolonged inflation, as it may become hot.
Warranty and Support
Warranty
This product comes with a 180-day warranty for any quality-related issues, offering replacement or refund as applicable.
Customer Support
For additional assistance, warranty claims, or any other inquiries, please contact POPDEER customer service:
- E-Mail: PopDeerMarketing@163.com
- POPDEER offers 7x24h customer service.
Please note that the LCD screen has a protective film that can be peeled off.