Jessinie 1.28 Inch Round RGB 240x240 GC9A01 Driver TFT LCD Screen Display Module

Contents

1.28 Inch TFT LCD Screen Display Module User Manual

Model: 1.28 Inch Round RGB 240x240 GC9A01 Driver TFT LCD Screen Display Module

Brand: Jessinie

1. Introduction

This manual provides essential information for the safe and effective use of the Jessinie 1.28 Inch Round RGB 240x240 GC9A01 Driver TFT LCD Screen Display Module. It covers product specifications, installation procedures, operational guidelines, maintenance, and safety warnings. Please read this manual thoroughly before using the product.

Multiple 1.28 inch round TFT LCD modules with pinouts
Overview of the 1.28 inch round TFT LCD display modules, highlighting the 240x240 resolution and GC9A01 driver.

2. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Specifications

The following table details the technical specifications of the 1.28 Inch TFT LCD Screen Display Module:

FeatureSpecification
Product Name1.28 Inch TFT LCD Screen Display Module Round RGB 240*240 GC9A01 Driver 7Pin SPI Interface ISP Full View For Arduino
Model Number1.28 inch round TFT color display module
Display Mode1.28 inch round TFT
TypeTFT
Pixel Resolution240x240
Supply Voltage3-5 V
Communication InterfaceSPI
Driver ICGC9A01
Operating Temperature-20°C to 70°C
LCD ColorFull-color RGB
ConnectorsCircular board: 7-pin
Viewing AngleIPS wide viewing angle
CustomizationYes
OriginMainland China
Batch/Serial NumberSZ-A-001334

4. Installation & Setup

4.1 General Guidance

This product is designed and manufactured in accordance with industry-standard specifications to ensure optimal performance and reliability. Users are expected to adhere to the following guidelines to maximize component functionality and service life.

4.2 Pre-Installation Considerations

Prior to integration, ensure that the operational environment aligns with specified technical parameters. It is recommended to verify compatibility with existing systems to facilitate seamless implementation. Ensure your microcontroller or development board supports SPI communication and can provide the necessary 3-5V supply voltage.

4.3 Installation Process

Follow established procedures for component placement and connection. Proper handling is essential to maintain integrity and prevent potential performance degradation. Connect the 7-pin SPI interface to your development board as follows:

Front and back view of the 1.28 inch round TFT LCD module, showing the 7-pin SPI interface
Front and back view of the display module, illustrating the physical layout and pin connections.
Bottom view of the 1.28 inch round TFT LCD module with clear pinout labels
Detailed view of the module's pinout for connection reference.

The 7-pin SPI interface typically includes VCC, GND, SCL (Serial Clock), SDA (Serial Data), DC (Data/Command), CS (Chip Select), and RST (Reset). Refer to your development board's documentation for specific SPI pin assignments.

5. Operating Instructions

5.1 Operational Notes

During use, maintain conditions within the prescribed ranges. Continuous monitoring of performance indicators is advised to sustain operational excellence. Ensure the power supply is stable and within the 3-5V range. Use appropriate libraries and code for the GC9A01 driver to initialize and control the display.

5.2 Demonstration Video

Watch this video for a visual demonstration of the display module in operation:

A short video demonstrating the functionality and display capabilities of the 1.28 inch TFT LCD module.

6. Maintenance & Care

Implement routine maintenance protocols to uphold product standards. Periodic inspections are encouraged to ensure ongoing compliance with quality expectations. Store it in a dry place. Keep away from children. Avoid exposing the module to extreme temperatures, high humidity, or direct sunlight. Clean the screen gently with a soft, dry cloth; do not use abrasive cleaners or solvents.

7. Troubleshooting

If you encounter issues with your display module, consider the following:

  • No Display/Blank Screen: Verify all wiring connections are secure and correct, especially VCC, GND, and SPI pins. Check the power supply voltage. Ensure your code correctly initializes the GC9A01 driver.
  • Incorrect Colors/Distorted Image: Double-check your software configuration for the GC9A01 driver, including color depth and display orientation settings.
  • Intermittent Operation: Ensure stable power supply and check for any loose connections. Electromagnetic interference can sometimes affect SPI communication; try to keep signal lines short and away from noise sources.

8. User Tips

  • When working with microcontrollers, ensure you use level shifters if your microcontroller operates at a different voltage (e.g., 5V Arduino with a 3.3V display module) to prevent damage.
  • Many users find the Adafruit GFX library combined with a specific GC9A01 driver library helpful for easy integration with Arduino.
  • Always test your connections and code incrementally, starting with basic initialization and then adding more complex display functions.

9. Compliance Information

9.1 CE Marking

This product conforms to the following EU Directives:

  • 2014/35/EU (Low Voltage Directive)
  • 2014/30/EU (Electromagnetic Compatibility Directive)

9.2 RoHS Declaration

This product is in compliance with Directive 2011/65/EU and its amendment (EU) 2015/863, concerning the restriction of hazardous substances (Pb, Cd, Hg, etc.) in electrical and electronic equipment.

10. Manufacturer & Support

10.1 Manufacturer

Company Name: Shenzhen ZhengYi Electronic Technology Co., Ltd
Full Address: Jia An Road XA 41 D3-6F, Bao An District, ShenZhen, Guangdong Province, China
Email: 1020636662@qq.com

10.2 EU Authorized Representative

Company Name: eVatmaster Consulting GmbH
Full Address: Raiffeisen Street2 B11, 63110 Rodgau, Hessen, Germany
Email: contact@evatmaster.com

10.3 Additional Documentation

For further details, you may consult the official user manual in PDF format: View User Manual (PDF)

11. Disclaimer

The manufacturer assumes no liability for outcomes resulting from non-compliance with these instructions, improper use, or unauthorized modifications. Specifications are subject to change without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.