varstrom CAN BUS E-Bike Display Series

Contents

Varstrom E-Bike Display User Manual

BAFANG CAN BUS System Displays

1. Introduction

This manual provides detailed instructions for the Varstrom E-Bike Display series, designed exclusively for BAFANG CAN BUS protocol mid-drive motors. This series includes models such as VD03, VD04, EKD01-CAN, VD618, VD18MT, DPC080, and DPC010. Each display offers real-time riding data and PAS control, with variations in screen type, interface logic, and system integration levels.

Important Note: Due to ongoing product upgrades, the display content you receive may vary slightly from this manual. These variations will not affect normal operation. Avoid plugging or unplugging components while the system is live, as this may damage electronic control accessories.

2. System Compatibility

These displays are strictly designed for BAFANG CAN BUS mid-drive motors. They are compatible with:

  • BAFANG CAN BUS Mid Motors
  • BBS01B / BBS02B / BBSHD
  • G340 / G320 series
  • M-series CAN-enabled mid-drive systems

They are not compatible with UART protocol systems or non-CAN versions. Correct matching between the motor, controller, and display is essential for full functionality.

Compatibility chart for BAFANG CAN BUS displays with different motor types.
Figure 2.1: Compatibility Chart. Shows compatibility with BAFANG Mid Drive Motors (M200-M820) and BAFANG NEWEST CAN Version BBS Motor. Not compatible with other brand motors, BAFANG Hub Motors, or BAFANG BBS Series Motor (UART Version).

3. Specifications

3.1. General Parameters (EKD01-AKSM Example)

Parameter Value
Length*Width*Height86.8*50.5*12.5 (mm)
Screen Size2.4"
Holder Diameter22.2 (mm)
TypeIPS
ColorRGB
Image Resolution320*240PX
Connector TypeM5 Waterproof Connector
Connector Length23 cm
Voltage36V/48V/52V
Working Temperature-20°C ~ +70°C
Waterproof LevelIP67
Weight67g
Communication ProtocolUART (Note: This seems to contradict CAN BUS, but is from OCR. Will clarify in description)
Bluetooth4.0 + BLE
Type-C interfaceSupport
CertificationRoHS/CE/FCC

*Note on Communication Protocol: While the general product is for CAN BUS, the EKD01-AKSM specific OCR lists UART. Please refer to your specific display model's documentation for exact protocol details.

3.2. Display Model Overviews

  • VD03 – Compact Basic Display

    1.5-inch LED screen, simple layout for essential riding data. Supports real-time speed, PAS level adjustment, wheel size, auto power-off. Advanced data (trip, ODO, average speed) via APP. Lightweight ABS/PC, IP67 waterproof. Ideal for commuter builds.

    VD03 Mini-CAN display features
    Figure 3.1: VD03 Display. Features 0-9 PAS Level, 1.5'' LED, φ22.2mm Holder, IP67 Waterproof, English Version, BIKEGO+ APP support.
  • VD04 – Large Screen Functional Display

    3.5-inch IPS screen, more complete data interface. Supports real-time speed, average speed, trip data, odometer, battery status, and unit switching directly on display. PC housing, IP67 protection, wider working voltage range. Suitable for daily riders needing direct data access.

    NEW VD04-CAN display features
    Figure 3.2: VD04 Display. Features Motor Power & Speed Settings, 0-9 PAS Level, 3.5'' IPS Screen, φ22.2/25.4/31.8 Holder, IP67 Waterproof, Navigation Function, Bluetooth + 'BIKEGO' APP, Supports 9 Languages.
  • EKD01-CAN – Balanced All-Round Model

    2.4-inch TFT color screen, three-button control. Offers balanced usability and functionality. Supports PAS 0–9 levels, real-time speed, trip/odometer, battery status, APP-assisted functions. ABS+PC housing, IP67 waterproof, compatible with 24V to 52V systems.

    EKD01-CAN display features
    Figure 3.3: EKD01 Display. Features Motor Power & Speed Settings, 0-9 PAS Level, 2.4'' TFT Screen, φ22.2/25.4 Holder, IP67 Waterproof, Navigation Function, Bluetooth + 'BIKEGO' APP, Supports multiple languages.
  • VD618 – High Voltage Color LCD Display

    3.5-inch segmented LCD screen, supports up to 72V systems. Provides real-time speed, PAS levels, trip/odometer. Instrument-side and APP-side unit switching. PC+ABS housing, IP66 protection. Suitable for upgraded systems requiring higher voltage flexibility.

    VD618 Color-CAN display features
    Figure 3.4: VD618 Display. Features 0-9 PAS Level, 3.5'' LCD Screen, φ22.2/25.4/31.8mm Holder, IP66 Waterproof, English Version, Light Sensor.
  • VD18MT – Touch Screen Control Display

    1.45-inch TFT display with touch interaction. Supports real-time speed, average speed, trip distance, odometer, PAS levels, battery status. ABS+PC housing, IP67 waterproof. Offers intuitive user experience and faster ride adjustments.

    VD18MT-CAN display features
    Figure 3.5: VD18MT Display. Features OS for Touchscreen, Motor Power & Speed Settings, 3/5/9 PAS Level, 1.45'' TFT Screen, φ22.2 Holder, IP67 Waterproof, English Version, Light Sensor, Bluetooth + 'iBike' APP.
  • DPC080 – Bafang Branded Compact Display

    1.9-inch TFT screen, tightly integrated with Bafang mid-drive systems. Focuses on stable communication and reliability. Supports real-time speed, PAS control, trip/odometer, battery display, ride-time tracking. IPX7 waterproof, PC+ABS housing. Widely used in OEM Bafang builds.

    BAFANG DPC080-CAN display features
    Figure 3.6: DPC080 Display. Features Motor Power & Speed Settings, 0-5 PAS Level, 1.9'' TFT Screen, φ22.2 Holder, IPX7 Waterproof, Bluetooth + 'BAFANG GO+' APP, Light Sensor, Supports 6 Languages.
  • DPC010 – Full Function Flagship Display

    4.0-inch TFT screen, full data interface for complete system control. Supports real-time speed, average speed, trip, odometer, PAS levels, battery status, and full configuration adjustment directly on display. IP66 waterproof, PC+ABS housing, fully compatible with Bafang CAN systems.

    BAFANG DPC010-CAN display features
    Figure 3.7: DPC010 Display. Features Motor Power & Speed Settings, 0-3/0-5 PAS Level, 4.0'' TFT Screen, φ22.2/25.4/31.8/35 Holder, IP66 Waterproof, Bluetooth + 'BAFANG GO+' APP, Light Sensor, Supports 3 Languages, 3 Main Interface.

4. Setup

4.1. Wiring Diagram

Ensure all components are correctly connected according to the wiring diagram. This system requires a BAFANG communication version battery.

Wiring diagram for CAN BUS E-Bike system
Figure 4.1: Wiring Diagram. Shows connections for BBS Motor (Optional), Battery (Optional, not included), Speed Sensor, Headlight, Gear Shift Sensor (not included), E-BUS 1T4 Cable, Display (Optional), Throttle, and Brake Lever or Brake Sensor.

4.2. Initial Power On

Press the 'Power' button (often marked 'O') to turn the display on. The default password to enter the main screen is 0000.

4.3. Language Selection

The display supports 9 languages. To change the language:

  1. Press 'O' to enter the settings menu.
  2. Use '+' or '-' to navigate to "Language".
  3. Press 'O' to select, then use '+' or '-' to choose your desired language.
  4. Press 'O' to confirm.

4.4. Unit Conversion (Metric/Imperial)

To switch between metric (km/h) and imperial (MPH) units:

  1. Press 'O' to enter the settings menu.
  2. Navigate to "Display Settings" and press 'O'.
  3. Select "Units" and press 'O'.
  4. Choose "Metric" or "Imperial" using '+' or '-'.
  5. Press 'O' to save and exit.

The default unit is Metric.

4.5. Bluetooth Connection

To connect your display to the mobile APP (BIKEGO+ or BAFANG GO+):

  1. Ensure Bluetooth unlock is enabled in the display's password settings (default is off).
  2. On the display, short press 'O' to enter the menu interface.
  3. Navigate to the "Bluetooth" menu and press 'O'. A QR code will appear.
  4. Download the appropriate mobile APP:
    • Android SDK 9 and above: Search "BIKEGO" or "BAFANG GO+" on app stores.
    • iOS SDK 12 and above: Search "BIKEGO" or "BAFANG GO+" on app stores.
  5. Open the APP on your smartphone and use its scan function to scan the QR code displayed on your e-bike display.
  6. Once bound, the APP will automatically jump to the home screen, and the Bluetooth indicator on the display will light up.

If Bluetooth unlock is enabled and the mobile app is not connected, a Bluetooth QR code interface will pop up for binding.

5. Operating Instructions

5.1. Button Definitions (EKD01-AKSM Example)

The EKD01-AKSM display typically features three buttons:

  • Power Key (O): Turns the display on/off, confirms selections in menus.
  • Plus Key (+): Increases values, navigates up in menus, turns on headlights (long press).
  • Minus Key (-): Decreases values, navigates down in menus, activates walk assist (long press).

5.2. General Operations

5.2.1. Power On/Off

Press and hold the 'Power' button (O) for more than 2.5 seconds to turn the display on or off. In shutdown state, current consumption is less than 1uA.

5.2.2. Gear Level Selection

After powering on, use the '+' or '-' buttons to adjust the PAS (Pedal Assist System) gear level. The default gear range is 0-5 (customizable). Gear 0 provides no power output, while Gear 5 provides the highest power. The default setting upon power-on is Gear 0.

5.2.3. Headlight and Backlight Control

  • Turn On Headlights: When the headlights are off, long press the '+' button. The headlight indicator will light up, and the display brightness will dim.
  • Turn Off Headlights: When the headlights are on, long press the '+' button. The headlight indicator will dim, and the display brightness will increase.
  • Adjust Backlight Brightness: In the "Display Settings" menu, navigate to "Brightness" to select between 10%, 30%, 50%, 75%, and 100%.

5.2.4. Boost Mode (Walk Assist)

To activate boost mode (walk assist) at 6km/h:

  1. In any gear, long press the '-' button. The display will show a dynamic icon indicating boost mode.
  2. Release the '-' button to exit boost mode. The icon will disappear, and the speed will return to zero.

If the display is static and no operation is performed within 5 seconds in boost mode, it will automatically revert to Gear 0.

5.3. Advanced Settings and Quick Keys

Certain display models (EKD01, VD04, VD18MT, DPC080, DPC010) allow direct motor programming without a USB cable. Access these settings via the Advanced Settings menu:

  • Speed up Character: Adjusts throttle response curve (smooth or punchy).
  • Max Output Power: Sets peak wattage.
  • Speed limit in Gear: Configures separate speed caps per gear.
  • Start up Angel: Controls how quickly assist kicks in from a standstill.
  • Battery Info (under Information): Provides real-time voltage, health, and capacity data.
Advanced settings overview for CAN BUS displays
Figure 5.1: Advanced Settings. Shows options for Speed up Character, Speed limit in Gear, Max Output Power, and Start up Angel. Applicable to EKD01, VD04, VD18MT, DPC080, and DPC010.

5.3.1. Handlebar Shortcut Controls

These shortcuts work with most Bafang CAN BUS systems:

  • Headlights On: Long press '+' or 'Power' button.
  • Walk Assist (6km/h push mode): Long press '-' or 'Down' button.
  • 25 km/h Limit Toggle (off-road / private land only): Press '+' and '-' together.
  • For VD03 / VD18MT (25 km/h Limit Toggle): Press 'Power' and '-' together.

EU Rule Reminder: Electric bicycles are prohibited from driving on public roads at speeds exceeding 25 km/h. The DPC080/DPC010 displays do not feature a quick adjustment function for the 25 km/h speed limit to comply with EU regulations.

Quick key functions for E-Bike displays
Figure 5.2: Quick Keys. Illustrates button combinations for headlights, walk assist, and 25km/h speed limit switching (with specific notes for DPC080/DPC010 and VD03/VD18MT).

5.4. Information Viewing

Access various information and settings through the display menu:

  1. Wheel Size Information: View the current wheel diameter (default 26", range 16"-29"). Requires password 2020 (cannot be modified).
  2. Speed Limit Information: View the current speed limit (default 99 km/h or 61.88 MPH). Requires password 2020 (cannot be modified).
  3. Display Information: Shows software and hardware version numbers.
  4. Battery Information: View battery details (not adjustable).
  5. Error Code: Displays error messages. "E-CODE 0" is the last error, "E-CODE 9" is the tenth. "00" indicates no error. Refer to the Troubleshooting section for details.
  6. Power and Voltage Switching: Switch between displaying power percentage or voltage on the main interface.
  7. Acceleration Feature Menu: View acceleration parameters for each gear.
  8. Maximum Output Power: View maximum output power parameters for each gear.
  9. Current Gear Speed Limit: View speed limit settings for each gear.
  10. Start Up Angel: View the current startup angle setting.

5.5. Navigation Function (via APP)

After successfully connecting the display to the mobile APP via Bluetooth:

  1. Click "GO" on the main interface of the APP to enter the navigation interface.
  2. Select your destination.
  3. When navigation starts, the display will show real-time navigation information (Note: Live navigation requires payment for certain features).

The display will show a navigation indicator, Bluetooth indicator, real-time synchronization time (from phone), current hint and distances, next turn tips, and mileage to destination.

6. Maintenance

6.1. Factory Reset

To restore the display to factory settings:

  1. Short press 'O' to enter the menu interface.
  2. Navigate to "Factory Reset" and press 'O'.
  3. Select "Confirm" and press 'O'. The instrument will restart and restore default settings (including language, password, Bluetooth distance level, backlight level).
  4. To cancel, select "Cancel" instead of "Confirm".

6.2. General Care

  • Keep the display clean using a soft, damp cloth. Avoid abrasive cleaners.
  • The display has an IP66/IP67/IPX7 waterproof rating (depending on model), meaning it is protected against splashes and rain, but avoid submerging it.
  • Operate within the specified working temperature range (-20°C ~ 70°C) to ensure longevity.

7. Troubleshooting

7.1. Error Code Comparison Table

If an error code appears on the display, refer to the table below for the fault description and troubleshooting steps:

Error Code Description of the Fault Troubleshooting Methods
"04"The speed control put has no homingCheck that the handle is in place
"05"Speed regulation put failureCheck the handlebar
"07"Overvoltage protectionCheck the battery voltage
"08"The motor Hall signal line is faultyCheck the motor module
"09"Motor phase line failureCheck the motor module
"11"Controller temperature sensor failureCheck the controller
"12"Current sensor failureCheck the controller
"13"Battery internal temperature failureCheck the battery
"14"Temperature failure in the motorCheck the motor
"21"Speed sensor failureCheck where the speed sensor is installed
"22"BMS communication failureReplace the battery
"30"Communication failureCheck the controller connector

7.2. User Tips

  • Speed Limit Adjustment: Be aware that for displays sold in certain regions (e.g., Netherlands, EU), the speed settings may be fixed and not adjustable by the user, especially for public road use. The "Speed Limit Information" can be viewed but not modified. Always comply with local regulations regarding e-bike speed limits.
  • Password Management: The default password for initial access is 0000. If you choose to reset the password, ensure you remember the new one, as arbitrary changes to the initial password are not recommended.
  • Bluetooth Auto-Shutdown: The automatic shutdown function will not work if the instrument is continuously connected to the BIKEGO app via Bluetooth.

8. Warranty and Support

Varstrom is committed to providing excellent service and support for its products.

8.1. Warranty Periods

  • Motor & Battery: 12 months quality warranty.
  • Accessories & Parts: 30-day warranty for quality assurance.
Warranty periods for E-Bike components
Figure 8.1: Warranty Commitment. Shows warranty periods for E-Bike Frame (24 Months), Motor & Battery (12 Months), and Parts & Accessories (1 Month).

8.2. Service Centers

Varstrom has established 8 Maintenance Centers globally to provide prompt support. These centers are located in:

  • Poland (Wroclaw)
  • Spain (Lleida)
  • France (Sonnay)
  • United Kingdom (North Lanarkshire)
  • Italy (Belluno)
  • Germany (BarBel)
  • United States (Denver)
  • Canada (Winnipeg)
Varstrom global maintenance centers
Figure 8.2: Varstrom Maintenance Centers. Lists locations in Poland, Spain, France, UK, Italy, Germany, USA, and Canada.

8.3. Additional Resources

For a comprehensive user manual in PDF format, please refer to the official document: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.