1. Introduction and Overview
The FUZRR FR15B+ and FR17B+ are new technology digital multimeters featuring a two-color protective cover design, hand-held non-slip ergonomic grip, and a large-screen LCD display. These multimeters are characterized by multi-functionality, high precision, high performance, anti-drop durability, safety, and stability.
They can accurately measure AC/DC voltage, high voltage alarm, AC/DC current, frequency, continuity, diode, resistance, capacitance, battery load, NCV (Non-Contact Voltage) and Live wire detection. Both models include misoperation circuit protection, making them suitable for professional electricians, electronic technology maintenance and repair, and essential tools for DIY electronics enthusiasts, homes, and factories.


2. Safety Information
Please read and understand all safety information before using the instrument. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This product strictly adheres to the safety standard of European Electrotechnical Commission EN61010-1 and the technical design standard of China GB T 13978.
- Always read the "safety information" thoroughly before using the instrument and operate in strict accordance with the provided instructions.
- Measure only within the specified range for each function. Do not rotate the dial switch during measurement to prevent damage from misoperation.
- To avoid potential electrical shock, do not touch live conductors exceeding 30V AC and 60V DC during measurements.
- When measuring AC and DC voltages over 599V, a high voltage lightning symbol will display, and the buzzer will beep. Exercise extreme caution during such measurements.
- Do not use the multimeter in inflammable or explosive environments to prevent danger.
- To avoid measurement errors, replace the battery immediately when the low battery symbol ([battery icon]) appears on the meter display.
- Before measuring, inspect the test leads and wires for any damage or leakage. Do not use if any damage is found.
- Comply with all national regulations and measurement safety standards. When measuring hazardous voltage, wear insulating gloves or flame retardant protective products.
3. General Technical Indicators
- Safety Level: CAT II 1000V, CAT III 600V
- Product Range: AUTO
- Maximum Display: 6000 counts (for both FR15B+ and FR17B+)
- Sampling Rate: 3 times/second
- Overload Display: OL
- Auto Power Off: Approximately 15 minutes
- Operating Temperature: 0°C to 40°C
- Precision: 23°C ± 5°C (18°C to 28°C; Humidity <75%); 1 year
- Storage Temperature: -10°C to 60°C
- Storage Humidity: ≤80%
- Altitude: 0 to 2000m
- Pollution Grade: 2
- Safety Codes: CE EN61010-1-2-030
- Electromagnetic Environment: EN61326-1-2
- Power: AA 1.5V x 3 batteries
- Dimensions: 183 x 91 x 45mm
- Weight: 402g (inclusive of battery)
4. Description of Appearance
The following diagram illustrates the main components and their functions on the multimeter.

| No. | Component | Description |
|---|---|---|
| 1 | Display LCD | Shows measurement readings and symbols. |
| 2 | Function key | Buttons for various functions like HOLD, RANGE, MAX/MIN, MODE. |
| 3 | Dial switch | Selects the measurement function (e.g., Voltage, Current, Resistance). |
| 4 | VΩmA Input | Red test lead input for Voltage, Resistance, Capacitance, Frequency, Diode, Continuity, and small current measurements. |
| 5 | COM Input | Common ground black test lead input. |
| 6 | 10A Input | Red test lead input for high current (up to 10A) measurements. |
5. LCD Display and Symbols
The LCD displays various symbols to indicate the current measurement mode, status, and warnings.
| No. | Symbol | Explanation | Remark |
|---|---|---|---|
| 1 | OFF | Turn off the power | |
| 2 | [Power icon] | Auto power-off | |
| 3 | [Battery icon] | Low battery indication | |
| 4 | mV | DC millivolt | |
| 5 | V | DC voltage | |
| 6 | TRUE RMS | True RMS | |
| 7 | ~V | AC voltage | |
| 8 | Hz | Frequency | |
| 9 | = uA,mA,A | DC uA,mA,A | |
| 10 | ~ uA,mA,A | AC uA,mA,A | |
| 11 | Ω KΩ MΩ | Resistance Ω KΩ MΩ | |
| 12 | ))) [Diode icon] | Continuity beeper, Diode | |
| 13 | [Capacitance icon] nF uF mF | Capacitance nF uF mF | |
| 14 | REL | Clear the relative value | |
| 15 | [Battery icon] | Battery 1.5V, 9V | |
| 16 | NCV EF | Non-contact sensing signal | |
| 17 | LIVE | AC Live | |
| 18 | °C/°F | Temperature | |
| 19 | [Current Clamp icon] | Current Clamp | |
| 20 | VFD | AC variable frequency measurement |
6. Key Functions
| No. | Key | Description |
|---|---|---|
| 1 | MODE/VFD | Mode switch (short press); Press and hold for 3 seconds for VFD function. |
| 2 | MAX/MIN | Measures and displays the maximum or minimum value. |
| 3 | RANGE | Manual range selection (overrides auto-ranging). |
| 4 | HOLD | Data hold (short press) to freeze the current reading on the display. |
| 5 | [Backlight icon] | Activates or deactivates the backlight. |
7. International Electrical Symbols
Familiarize yourself with these international safety and compliance symbols:
| No. | Symbol | Explanation |
|---|---|---|
| 1 | ! | Be careful! Indicates a dangerous operation. |
| 2 | [High current/voltage warning icon] | High current! Indicates a high voltage hazard warning. |
| 3 | CE | European Union unified directive, European CE certification. |
| 4 | [Grounding icon] | Grounding. |
| 5 | [Double insulation icon] | Double insulation or enhanced insulation protection. |
| 6 | [WEEE recycling icon] | Compliance with WEEE recycling instructions. |
8. Technical Specifications
Detailed measurement ranges and accuracies for the FR15B+ and FR17B+ models.

DC Voltage
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| DCV Range | 60.00mV | 60.00mV | 0.01mV | |
| 600.0mV | 600.0mV | 0.1mV | ||
| 6.000V | 6.000V | 0.001V | ±(0.5%+3) | |
| 60.00V | 60.00V | 0.01V | ||
| 600.0V | 600.0V | 0.1V | ||
| 1000V | 1500V | 1V | ±(0.8%+5) |
Input protection: Impedance 10MΩ; DC1500V; 1000Vrms
AC Voltage
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| ACV Range | 6.000V | 6.000V | 0.001V | ±(0.8%+5) 400Hz; |
| 60.00V | 60.00V | 0.01V | ±(1.2%+5) 1KHz | |
| 600.0V | 600.0V | 0.1V | ||
| 1000V | 1000V | 1V | ||
| VFD (AC Voltage) | 100~600V / 400Hz | 100~600V / 400Hz | 0.1V | ±(4%+5) |
| True/RMS | True/RMS |
Input protection: Impedance 10MΩ; 1000Vrms
ACV KHz (Frequency)
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Hz Range | 10.00Hz | 10.00Hz | 0.01Hz | |
| 100.0Hz | 100.0Hz | 0.1Hz | ±(0.5%+5) | |
| 1.000KHz | 1.000KHz | 0.001KHz | ||
| 60KHz | 60KHz | 0.01KHz |
Input protection: 1000Vrms
Resistance
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Ω Range | 600.0Ω | 600.0Ω | 0.1Ω | |
| 6.000KΩ | 6.000KΩ | 0.001KΩ | ±(1%+5) | |
| 60.00KΩ | 60.00KΩ | 0.01KΩ | ||
| 600.0KΩ | 600.0KΩ | 0.1KΩ | ||
| 6.000MΩ | 6.000MΩ | 0.001MΩ | ±(2.5%+5) | |
| 60.00MΩ | 60.00MΩ | 0.01MΩ |
Input protection: 1000Vrms
Continuity/Diode/NCV/LIVE
| Function | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Continuity | 0.1Ω~30Ω | 0.1Ω~30Ω | 0.1Ω | - |
| Diode | 0.500V~0.800V | 0.500V~0.800V | 0.001V | - |
| NCV | 50V~1000V | 50V~1000V | 0~5Cm Non-contact induction | |
| LIVE | 50V~1000V | 50V~1000V | Measure the live line |
Input protection: 1000Vrms
DC Current
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| DCA Range | 600.0uA | 600.0uA | 0.1uA | |
| 6.000mA | 6.000mA | 0.001mA | ±(0.8%+5) | |
| 60.00mA | 60.00mA | 0.01mA | ||
| 600.0mA | 600.0mA | 0.1mA | ||
| 6.000A | 6.000A | 0.001A | ±(2%+5) | |
| 10.00A | 10.00A | 0.01A |
Input protection: FUSE: 500mA/1000V; 10A/1000V; Φ6.3 x 31.5mm; 10A Test time Max 10S
AC Current
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| ACA Range | 600.0uA | 600.0uA | 0.1uA | ±(1%+5) |
| 6.000mA | 6.000mA | 0.001mA | 400Hz; ±(1.5%+5) | |
| 60.00mA | 60.00mA | 0.01mA | 1KHz | |
| 600.0mA | 600.0mA | 0.1mA | ||
| 6.000A | 6.000A | 0.001A | ±(2%+5) | |
| 10.00A | 10.00A | 0.01A |
Input protection: FUSE: 500mA/1000V; 10A/1000V; Φ6.3 x 31.5mm; 10A Test time Max 10S
Temperature
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| °C/°F Range | - | -50°C~0°C | 1°C | 4°C |
| - | 0°C~100°C | 1°C | ±(1.5%+4) | |
| - | 100°C~1000°C | 1°C | ||
| - | -58°F~32°F | 1°F | 5°F | |
| - | 32°F~212°F | 1°F | ±(2%+5) | |
| - | 212°F~1832°F | 1°F |
Input protection: 1000Vrms
Capacitance
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Capacitance Range | 6.000nF | 6.000nF | 0.001nF | |
| 60.00nF | 60.00nF | 0.01nF | ||
| 600.0nF | 600.0nF | 0.01nF | ±(4%+5) | |
| 6.000uF | 6.000uF | 0.001uF | ||
| 60.00uF | 60.00uF | 0.01uF | ||
| 600.0uF | 600.0uF | 0.1uF | ||
| 6000uF | 6000uF | 0.001mF | ±(8%+5) | |
| 60000uF | 60000uF | 0.1mF |
Input protection: 1000Vrms
Current Clamp
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Current Clamp | 6.0A (AC/DC) | 6.0A (AC/DC) | 0.1A | |
| 60.0A (AC/DC) | 60.0A (AC/DC) | 0.1A | ±(3%+5) | |
| 600.0A (AC/DC) | 600.0A (AC/DC) | 0.1A |
Input protection: 1000Vrms; Current clamp output: 1A/1mV AC
KHz (Frequency)
| Range | FR15B+ | FR17B+ | Resolution | Accuracy |
|---|---|---|---|---|
| Hz Range | 10.00Hz | 10.00Hz | 0.01Hz | |
| 100.0Hz | 100.0Hz | 0.1Hz | ±(0.5%+5) | |
| 1.000KHz | 1.000KHz | 0.001KHz | ||
| 10.00KHz | 10.00KHz | 0.01KHz | ||
| 100.0KHz | 100.0KHz | 0.1KHz | ||
| 1.000MHz | 1.000MHz | 0.001MHz | ||
| 20.00MHz | 20.00MHz | 0.01MHz | ||
| Duty cycle | 10~90% | 10~90% | 0.1% | ±(1%+5) |
Input protection: 1000Vrms; 10Hz~100KHz/ ≤200mVrms; 100KHz~10MKHz/ ≤500mVrms
9. Quick Application Guide
This section provides a quick reference for common measurement applications.
| Measurement Range | Test Pen Link Hole | Illustration of Measurement Examples |
|---|---|---|
| ACV/Hz | Black COM Red VΩ | ACV 220V, 380V/50HZ |
| DCV | Black COM Red VΩ | Electric Vehicle Lithium 36V, 48V, Vehicle charging systems |
| Continuity/Diode | Black COM Red VΩ | Continuity buzzer beeps, Diode forward |
| Resistance | Black COM Red VΩ | SMD Resistors, Plug-In Resistors, On-Circuit Impedance |
| Capacitance | Black COM Red VΩ | Chip Capacitors, Electrolytic Capacitors |
| NCV/LIVE | Red VΩ | Measurement AC voltage, LIVE firewire alarm |
| DCA uAmA | Black COM Red uAmAVΩ | Meter pen series circuit measurement, prohibited input AC220V |
| DCA 10A | Black COM Red A | Meter pen series circuit measurement, prohibited input AC220V |
| ACA uAmA | Black COM Red uAmAVΩ | Meter pen series circuit measurement, prohibited input AC220V |
| ACA 10A | Black COM Red A | Meter pen series circuit measurement, prohibited input AC220V |
| Current clamp 600A (AC/DC) | Black COM Red VΩ | Select using Current clamp can measure AC/DC600A |
| Temperature °C/°F | Black COM Red VΩ | Testing of air-conditioning systems, refrigeration systems |
| KHz | Black COM Red VΩ | Frequency signal measurement |
10. Maintenance
10.1. Replace Fuse
WARNING: Disconnect the test leads from the circuit before replacing the fuse to avoid electric shock.
Fuse Specification:
- FR15B+ / FR17B+:
- F1: 500mA/1000V Φ6.3x31.5mm
- F2: 10A/1000V Φ6.3x31.5mm
10.2. Replace Battery
WARNING: Disconnect the test leads from the circuit before replacing the battery to avoid electric shock.
Battery Specification: LR06 AA 1.5V x 3
To replace the battery:
- Unscrew the battery cover.
- Replace the old batteries with new ones, ensuring correct polarity.
- After replacing the battery, ensure the battery cover is tightly screwed back before using the meter normally.

10.3. Repair
WARNING: Repairs should only be performed by an approved and professionally experienced technician.
If a fault cannot be resolved, please contact the official after-sales service. Non-professionals should not attempt repairs to avoid damaging the instrument or risking electric shock due to improper maintenance.
11. Troubleshooting
This section provides general troubleshooting tips. For specific issues not covered here, please refer to the contact information for support.
- No Display / Faint Display: Check battery level and replace if low. Ensure batteries are inserted with correct polarity.
- Incorrect Readings: Verify the correct function and range are selected. Ensure test leads are properly connected and not damaged. Check for external interference.
- No Continuity Beep: Ensure the continuity function is selected and test leads are making good contact.
- Overload Indication (OL): The measurement exceeds the selected range. Switch to a higher range or a different function if applicable.
12. User Tips
Based on common user experiences, here are some tips for optimal use:
- Always start with the highest range when measuring an unknown voltage or current to prevent damage to the multimeter.
- For precise measurements, ensure the test leads are clean and free from corrosion.
- Utilize the HOLD function to freeze readings in hard-to-reach or poorly lit areas.
- The auto-ranging feature simplifies operation, but manual range can be useful for specific diagnostic tasks.
13. Package Contents
Upon opening the package, please verify that all the following items are included:
- 1 × FUZRR Digital Multimeter (FR15B+ or FR17B+ model)
- 2 × Test Leads (Red and Black)
- 1 × User Manual (this document)
- (Note: Batteries are not included and must be purchased separately.)

14. Support and Contact Information
For technical support, service, or inquiries, please contact:
GuangZhou ZhengNeng Electronics Technology Co.LTDAddress: 4F, Bldg. 6, Hongjie Ind. Park, Baiyun Dist., Guangzhou, Guangdong, China
Tel: 020-37319325, 020-36544171, 020-36544172
Fax: 020-37319075
Post: 510540
Website: www.znele.com
Manual Revision: REV01-202511