Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your new ipega SZ-5008B Wireless Bluetooth Game Controller. This controller is designed for a versatile gaming experience across multiple platforms.
The ipega SZ-5008B is a Bluetooth wireless controller compatible with PS5 series consoles, PC (Windows 10 and above), Steam Deck, MAC computers, Android 10 and above systems, and iOS devices. It supports advanced features such as SENSOR and vibrate functions on PS5, a built-in speaker, 3.5mm audio jack, RGB lighting effects, TURBO frequency adjustment, motor strength adjustment, and a six-axis function with a two-point capacitance induction Touchpad.
Safety Information
Attentions
- Keep this product out of reach of young children. Small parts may be swallowed.
- The product contains lithium batteries. Improper use can cause fire or explosion. Do not heat, open, puncture, destroy, or place the product or battery in fire.
- Do not touch the product with wet hands to prevent liquid damage.
- Do not disassemble, repair, or modify the product without authorization to avoid further damage or safety risks.
- Before connecting to a console, ensure the interface is free of dust or foreign matter.
- Do not expose the product to dust, smoke, steam, high temperatures, high humidity, or direct sunlight, which may damage the battery or cause melting.
Product Overview
Controller Layout

The controller features a symmetrical layout with a D-pad on the left, action buttons (Triangle, Circle, Cross, Square) on the right, and two high-sensitivity 3D joysticks. Key buttons include:
- Direction Key (D-Pad): Up, Down, Left, Right
- Left 3D Joystick & L3 Key
- Right 3D Joystick & R3 Key
- SHARE Button
- OPTION Button
- HOME/PS Button
- TURBO Button
- L1, L2 (Trigger) Keys
- R1, R2 (Trigger) Keys
- Macro M1, M2 Keys
- LIGHT Button
- Earphone Jack (3.5mm Audio)
Key Features
- Multi-Platform Compatibility: Supports PS5, PC (Windows 10+), MAC, iOS, Steam Deck, Android 10+ devices.
- Integrated Audio: Built-in speaker and 3.5mm audio jack for earphones and microphone.
- Customizable Lighting: Separate channel light indicator and RGB light effect adjustment.
- Performance Enhancements: TURBO frequency and motor strength adjustment.
- Advanced Motion Sensing: Six-axis function (3D-Sensor and G-Sensor) and two-point capacitance induction Touchpad.
- Wired & Charging: Supports TYPE C USB cable connection and charging.
- Software Updatable: Firmware can be updated via PC USB cable.
Setup and Connection
PS5 Console Connection
- Ensure your PS5 console is powered on.
- Connect the controller to the PS5 console using a USB-C cable. The system will automatically pair the controller.
- Once paired, unplug the USB cable.
- Press the HOME button on the controller. It will now connect wirelessly via Bluetooth.
- When connected, the LED light will display a constant color. For multiple controllers, different colors distinguish players.
- The controller supports Audio, Axis Sensor functions, and the two-point capacitance induction Touchpad on PS5.
WINDOWS PC Connection
Bluetooth Connection (Requires PC with Bluetooth)
- Turn off the controller.
- Press and hold the SHARE key, then simultaneously press and hold the HOME key (SHARE+HOME) for 3 seconds. The controller will enter pairing state, and the LED channel blue light will blink.
- On your PC, turn on Bluetooth and search for devices.
- Find and click "DualSense Wireless Controller" in the device list to pair.
- After successful pairing, the corresponding LED channel light will be steady on.
USB Cable Connection
- In the shutdown state, connect the controller to your computer via a USB-C cable.
- The controller defaults to PS5 "DualSense Wireless Controller" mode, with a blue LED channel light. It supports headset audio and voice functions.
- To switch to X-INPUT (PC360) mode, long press the combination key (SHARE+OPTIONS) for 3 seconds. The LED channel light will display green.
- Note: Switching to X-INPUT (PC360) mode is not supported on MAC Computers.
Android Devices Connection
- Turn off the controller.
- Press and hold the SHARE key, then simultaneously press and hold the HOME key (SHARE + HOME) for 3 seconds. The controller will enter pairing state, and the blue LED channel light will flash.
- On your Android device, go to Bluetooth settings and turn it on.
- Find "DualSense Wireless Controller" and click to connect.
- The LED light will display blue after connection. If pairing times out (approx. 60 seconds), the controller will shut down.
iOS Devices Connection (iOS 13 and above)
- Ensure your iPhone or iPad is running iOS 13 or above.
- Turn off the controller.
- Press and hold the SHARE key, then simultaneously press and hold the HOME key (SHARE + HOME) for 3 seconds. The controller will enter pairing state, and the blue LED channel light will flash.
- On your iOS device, go to Settings > Bluetooth and turn it on.
- Find "DualSense Wireless Controller" and click to pair.
- After successful pairing, the corresponding LED channel light will be steady on.
- Note: If pairing times out (approx. 60 seconds), the controller will shut down. It only supports MFI games.
Mac Computer Connection
Bluetooth Connection
- On your Mac, go to "System Preferences" > "Bluetooth" and click "Turn on Bluetooth." The Bluetooth indicator will flash.
- Turn off the controller.
- Press and hold the SHARE button, then simultaneously press and hold the SHARE+HOME buttons for 3 seconds. The controller enters pairing mode, and the LED channel blue light blinks.
- In Bluetooth Preferences, your Mac will search for devices. When "DualSense Wireless Controller" appears, click it to pair.
- After successful pairing, the corresponding LED channel light will be steady on.
USB Cable Connection
- In the power-off state, connect the controller to your Mac via a USB-C cable.
- The controller defaults to PS5 "DualSense Wireless Controller" mode, with a blue LED channel light. It supports headset audio and voice functions under wired connection.
Steam Deck Connection
Bluetooth Connection
- Turn off the controller.
- Press and hold the SHARE key, then simultaneously press and hold the HOME key (SHARE+HOME) for 3 seconds. The controller enters pairing state, and the white channel LED light blinks.
- On your Steam Deck, search for the Bluetooth name "DualSense Wireless Controller" and click to pair.
- After successful pairing, the corresponding LED channel light will be steady on. If the controller cannot connect, it will shut down after approximately 60 seconds.
Wired Connection
- Plug a Type-C converter (TYPE C to USB A female port with OTG function, purchased separately) into the Steam Deck console.
- Connect the controller to the converter via a USB cable.
- The wired mode supports audio and can be switched between PS5 wired and X-input modes.
Operation
TURBO Function Setting
The TURBO function can be set for the ╳, ○, □, △, L1, L2, R1, R2 keys.
- Activate/Cycle: Press the desired action key + TURBO key to cycle through: Turbo On > Auto Turbo > Turbo Off.
- Indication: The controller channel light will flash according to the current Turbo frequency.
- Memory: TURBO settings are not saved after the controller is turned off and revert to default (10 times per second).
- Speed Adjustment: There are three TURBO speed gears (5-10-15HZ).
- Increase Speed: Press TURBO + Right 3D joystick (push up).
- Decrease Speed: Press TURBO + Right 3D joystick (push down).
- Default is middle gear.
Remap Function Setting (M1/M2/LIGHT)
Programmable keys include ╳, ○, □, △, L1, L2, R1, R2, D-Pad (UP/DOWN/LEFT/RIGHT), Left joystick, Right joystick (8 directions each). Supports recording press and release times.
- Enter Remap Mode: Press and hold the LIGHT key for 3 seconds. The channel light blinks slowly, and the motor vibrates.
- Record Mapping: Press any action key you want to map. The channel light will flash quickly when pressed and slowly when released, recording the timing.
- Save Mapping: After recording, press either M1 or M2 on the back of the controller. The channel light will become steady, and the motor will vibrate, indicating successful mapping. The selected M1/M2 key is now a Macro key.
- Macro Limit: A Macro can record a maximum of 16 key presses. After 16 presses, the channel light will stop flashing.
- Exit Remap Mode: If no key is pressed for 8 seconds after entering Remap mode, it will automatically exit, retaining previous settings.
- Macro Activation: If M1/M2 are mapped to multiple keys (Macros), pressing M1/M2 will start the Macro. Pressing it again will interrupt the Macro.
Cancel Macro Function
- Press and hold the LIGHT key for 3 seconds. The channel light blinks slowly, and the motor vibrates.
- Directly press M1 or M2. The channel light will remain on, and the motor will vibrate, canceling the Macro setting for that key.
Note: The mapping keys (M1/M2) have no function by default. Users need to set the Remap. The mapping key has a memory function.
RGB Function Setting
- Switch Light Effect Mode: Press LIGHT + R3 (right joystick push down, controller vibrates once) to cycle through: Colorful light changing > Single color Light steady on > Single color breathing light cycle changing > Single color Breathing light.
- Pause Colorful Mode: In "Colorful light changing" mode, press and hold LIGHT + L3 (left joystick push down) to pause.
- Switch Single Color (Steady/Breathing): In "Single color Light steady on" or "Single color Breathing light" mode, press and hold LIGHT + L3 (left joystick push down, controller vibrates once) to cycle through colors (pink blue, blue, light green, green, cyan, purple, pink, red).
- Adjust Brightness: In "Colorful light changing," "Single color light steady on," or "Single color breathing light" modes, press LIGHT + UP (D-pad) to increase brightness, or LIGHT + DOWN (D-pad) to decrease brightness. Brightness adjustment has a memory function.
- Turn RGB On/Off: Long press L3 + R3 for 3 seconds (controller vibrates once) to turn RGB lights off or on. Light effect settings have a memory function (only saves the current light effect mode).
Motor Vibration Strength Adjustment
The controller has 4 adjustable vibration strength gears: 100%, 75%, 50%, 0%. This setting has a memory function.
- Increase Strength: Press and hold TURBO + Left 3D joystick (push up).
- Decrease Strength: Press and hold TURBO + Left 3D joystick (push down).
Maintenance
Usage and Care
- The product interface should not come into contact with other metal objects.
- Do not place anything on top of the product, stand on it, throw or drop it, or apply excessive force.
- Do not place the product on unstable, tilted, or vibrating surfaces.
- Wipe the product with a soft, dry cloth.
- Do not place rubber or vinyl materials on the product for extended periods to prolong its life.
- Do not use solvents or other chemicals, or chemically treated cloths for cleaning.
Trigger, 3D Joystick Calibration
The controller is factory-calibrated. Re-calibration is generally not needed unless deviation is observed.
- Enter Calibration Mode: In the shutdown state, press and hold "SHARE + OPTIONS" and connect the USB-C cable to a computer. The channel light will flash.
- Perform Calibration: Tap the L2/R2 triggers 2-3 times each. Shake the left and right 3D joysticks at their maximum angle for 2-3 turns.
- Confirm Calibration: Long press the X key for 1 second to confirm. The calibration is successful when the channel light is steady on.
- Save: Shut down the controller to save the calibration.
Sensor Checkout (Calibration)
The SENSOR checkout is automatically completed before delivery. If sensor drift occurs:
- Connect the controller (wired or wireless) to a device.
- Place the controller horizontally on a flat surface.
- Long press the SHARE + □ combination key for 3 seconds. The channel light will blink quickly, indicating Sensor calibration mode.
- The calibration is complete when the channel light stops blinking.
Troubleshooting
Trouble Removal
- Q1: The Controller cannot connect to the Console.
A1: Ensure your PS5 console is powered on. Check if the controller is paired; if not, pair it first. Verify the PS5 console is set up for USB cable communication. Ensure the USB-C cable is correctly connected to the controller and console. - Q2: The Controller is connected but has no function.
A1: When multiple controllers are connected, confirm that the Player #1 controller is being used.
Re-connection Mode
- For controllers previously paired via Bluetooth, press the HOME key to power on and re-connect to the console.
- On PS5, pressing the HOME key can wake the console from hibernation.
- If re-connection takes longer than 15 seconds, the controller will automatically shut down.
- Note: Only the console last paired with the controller can be re-connected automatically.
Battery Information
Battery Warning
When the controller's battery is low, the PS5 console will indicate a low battery status. Please charge the controller promptly.
Charging Function
- Use a TYPE-C charging cable to charge the controller.
- When powered off: The LED channel indicator will display an orange breathing light. The light turns off when fully charged.
- When in use: The current LED channel light remains steady on during charging.
- You can charge the controller via a PS5 console, computer USB port, or a charger with 5V 1A output.
Power On/Off and Sleep
- Power On: Short press the HOME key. The controller will automatically enter re-connection mode.
- Power Off: Long press the HOME key for 10 seconds.
- Sleep Mode: When connected wirelessly, you can set the controller's shutdown time via the PS5 console (e.g., 10, 30, 60 minutes, or never). If the console sleeps or pairing times out (60 seconds), the controller will automatically enter sleep mode.
Reset Function
If the controller experiences abnormal operation or crashes, you can reset it. Use a small needle-like object to press the button inside the Reset hole located at the bottom of the controller.
Specifications
| Feature | Specification |
|---|---|
| Product Name | PS5 Bluetooth Controller |
| Model Number | SZ-5008B |
| Brand Name | ipega |
| Type | Gamepads |
| Compatible Brand/Model | Sony (PS5) |
| Joystick Sensor Module Brand/Type | Hall |
| Trigger Button Type | Hall-Linear |
| Battery Included | Yes |
| Battery Capacity | 3.7V 1500 mAH Li battery |
| Charging Voltage | DC 5V |
| Charging Current | ≈500mA |
| Charging Time | ≈ 3.5 hours |
| Working Distance | 10m |
| Audio Distance | 6m |
| Working Voltage & Current | 3V & ≈170mA |
| Static Working Current | 20µA |
| Package Dimensions (L x W x H) | 21 cm x 14 cm x 11 cm |
| Package Weight | 0.386 kg |
User Tips
- PS5 Compatibility: The controller is recognized as a DualShock controller on PS5 and works seamlessly with all PS5 games.
- Programmable Paddles: The M1/M2 macro paddles are easy to set up; refer to the 'Remap Function Setting' section for detailed instructions.
- Low Latency: Users report very good performance with little to no lag, enhancing the gaming experience.
- Joystick Comfort: If the joysticks feel uncomfortable, consider using clip-on joystick caps for improved ergonomics.
Warranty and Support
For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. Keep your purchase receipt for any warranty claims.
A comprehensive user manual is also available in PDF format for download: Download User Manual (PDF)