1. Introduction
This manual provides essential information for the safe and efficient use of your 2026 Pad 17 Pro Max Tablet PC. Please read it thoroughly before operating your device to ensure optimal performance and longevity.

Figure 1: Pad 17 Pro Max Tablet PC
2. Package Contents
Please check the box for the following items:
- 1 x Pad 17 Pro Max Tablet PC
- 1 x Paste protective film
- 1 x Headset
- 1 x Charger (appropriate plug adapter for your region)
- 1 x OTG connector
- 1 x Stylus
- 1 x User Manual (this document)
- 1 x USB conversion head

Figure 2: Included Accessories
3. Device Overview
Familiarize yourself with the physical components of your tablet:
3.1 Physical Components
- Touch Panel: The primary interface for interaction.
- Power Button: Long press to power on/off, short press to lock/unlock screen.
- Back Button: Returns to the previous screen or interface.
- MIC: Microphone for audio input.
- Volume +/- Buttons: Adjust the device's volume.
- Earphone Jack: 3.5mm standard audio output.
- Video Output Interface (HDMI): For connecting to external displays.
- TF Card Slot: For external T-FLASH (MicroSD) cards.
- Mini USB Port: For data transmission and charging.
- DC Adapter Port: Dedicated port for charging the tablet.
3.2 Status Bar
The status bar at the top of the screen displays important information:
- Left Side: Main interface software, T-Flash card status, USB connection status.
- Right Side: Battery level, charging icon, current time, settings menu, ESC button.
4. Initial Setup
4.1 Charging the Battery
Before first use, fully charge the tablet. Connect the provided charger to the DC Adapter port or use a USB interface. The battery icon will scroll during charging and turn green when fully charged.
- For the first two charges, allow approximately 6 hours. Subsequent charges typically take 4 hours.
- If the tablet is not used for an extended period, charge it at least once a month to maintain battery health.
- Charging should ideally be done in standby mode for faster charging.

Figure 3: Charging the Tablet
4.2 Inserting SIM and TF Cards
The tablet supports dual SIM cards and an SD card for expanded storage.
- Locate the SIM/TF card tray on the side of the tablet.
- Carefully insert your SIM cards (Nano-SIM recommended) and/or a TF (MicroSD) card into the designated slots.
- Ensure the tray is fully inserted and flush with the device body.

Figure 4: Dual SIM Card Slots
4.3 Powering On/Off
- To Power On: Press and hold the Power button until the screen lights up.
- To Power Off: Press and hold the Power button for about 5 seconds, then select