UWANT Y100 Portable Carpet Cleaner Machine User Manual

1. Safety Precautions

Prior to using this product, read all safety precautions. Install the machine step by step in strict accordance with all contents of the instruction manual. Any operation deviating from the instructions may result in product damage or severe personal injury. This product is designed solely for use in conventional household environments and is unsuitable for industrial or outdoor applications. When using electrical equipment, fundamental precautions must be observed, including the following:

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• The liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens.
• The appliance must be unplugged after use and before carrying out user maintenance on the appliance.
• The appliance shall not be left unattended while it is connected to the supply mains.
• The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• Keep the appliance out of reach of children when it is energized or cooling down.
• Never immerse the product in water or liquids.
• Do not touch the plug or any live insulated part with wet fingers to avoid electric shock.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid hazards.
• If plug or cord damage is detected, stop use immediately and contact the company's professional maintenance personnel for replacement to prevent hazards.
• Keep hair, loose clothing, fingers and other body parts away from this product's airflow channels and moving parts. Do not point the suction tube opening or accessory brush head toward eyes or ears, or place them in the mouth.
• Do not insert metal chips, pins, wires or similar objects into product gaps to prevent electric shock or injury. Disassembly, repair or modification must only be performed by qualified technicians.
• Unplug when not in use to prevent leakage, fire or malfunction.
• If abnormalities occur during operation, immediately disconnect power and contact the company's after-sales service.
• Rest water amounts in the machine are normal.
• Water discharge after pressing the spray button ends with a delay - normal.
• Do not place the brush head in a bucket or on surfaces with standing water, as over-suction can cause water leakage from the base.
• Empty the dirty water tank after each use before storage. When used infrequently, clean and dry both water tanks before storage to prevent bacterial growth and odor.
• All technologies and data in this manual are obtained by the company or designated third-party testing agencies. Final interpretation rights belong to the company.

2. Product Components

The UWANT Y100 is a versatile home cleaning solution integrating high suction power with spray, brush, and suction functions for professional deep cleaning and odor removal.

UWANT Y100 Portable Carpet Cleaner Machine and included accessories.

Main Unit Components

• Carrying Handle: For easy portability of the main unit.
• Water Tank Handle: For lifting and carrying the water tank assembly.
• Water Tank Assembly: Contains both clean and dirty water compartments.
• Hose Assembly: Connects the main unit to the handle assembly for water and suction.
• Main Unit Mount: Secures the handle assembly when not in use.
• Main Unit: The primary body of the cleaner housing the motor and tanks.

Handle Assembly Components

• Transparent Window: Allows visibility of the cleaning process and extracted dirt.
• Water Spray Nozzle: Dispenses cleaning solution onto the surface.
• Brush Head Release Button: For detaching and changing brush heads.
• 2-in-1 Flat Brush (Bristle Brush / Silicone Brush): Versatile brush for different fabric types.
• Water Spray Button: Activates the water spray function.

What's in the Box

All items included in the product packaging.

• 1 × Main Unit (includes hose)
• 1 × Standard Fabric Brush Head
• 1 × Shoe Cleaning Brush Head
• 1 × Self-Cleaning Plug
• 1 × Dual-Sided Flexible Brush Sheet
• 1 × 500ml Fresh Scent Fabric Cleaning Liquid
• 1 × Product Guide Card

3. Setup and Preparation

Brush Head Installation

1. Connect the handle and brush head until a "click" is heard, indicating successful installation.

Ensure the brush head is securely attached to the handle.

Water Tank Filling

1. Hold the tank handle and lift the water tank assembly vertically upward to remove it from the main unit.
2. Open the tank lid. You will see the Clean Water Tank Maximum Level Mark and Waste Water Tank Maximum Level Mark.
3. Open the water inlet plug for the clean water/cleaning solution inlet.
4. Fill the clean water tank with room-temperature clean water. Note: The water level must not exceed the maximum fill line.
5. Add UWANT Textile Cleaning Solution. The recommended dilution ratio is 1ML cleaning solution to 30ML water. Please adhere to this ratio; excessive solution may generate abundant foam, which can affect machine performance.
6. Ensure the sealing ring is properly seated. A missing or misaligned sealing ring will prevent the machine from drawing water properly during startup.

Properly fill the clean water tank and add cleaning solution.

Water Tank Installation

1. When installing the water tank, align it with the unit's slot and insert vertically.
2. Press down firmly to ensure the water tank is securely in place.

Align and insert the water tank vertically into the main unit.

4. Operating Instructions

Powering On/Off

1. Turn the knob on the main unit to the "Cold Water Mode" for general stain cleaning.
2. Machine suction activates automatically upon startup.
3. To turn off, turn the knob to the "Standby" position.

Select the desired mode using the power knob.

Fabric Cleaning 3-Step Process

1. Spray & Dissolve: Hold the brush head close to the stained area and press the water spray button to apply cleaning solution.
2. Scrub: After the stain begins to dissolve, repeatedly scrub the area with the brush head to further dilute stubborn stains.
3. Extract: Keep the suction inlet perpendicular and flush against the fabric surface for optimal extraction results. The cleaned fabric surface will be damp; allow it to air dry naturally.

Follow the spray, scrub, and extract steps for effective cleaning.

Brush Head Usage

The UWANT Y100 comes with various brush heads for different cleaning needs:

• Flexible Bristle Brush Head: Suitable for cleaning the surface of most fabrics.
• Flexible Silicone Brush Head: Accelerates stain breakdown and resists fiber tangling. To switch, press the tabs at the base of the dual-surface brush plate to remove it, then flip to the reverse side (silicone brush) and press until it clicks into place.
• Flexible Microfiber Brush Head: Suitable for cleaning hard surfaces and delicate fabrics. (Note: This brush is not included in the box and must be purchased separately.)
• Shoe Surface Brush: Ideal for cleaning shoes or dirt on hard surfaces.

Choose the appropriate brush head for your cleaning task.

The shoe surface brush is designed for effective shoe cleaning.

5. Maintenance

Self-Cleaning

1. Install the Self-Cleaning Stopper onto the handle assembly.
2. Press the water spray button to clean the handle and internal handle tubing.
3. After self-cleaning is complete, turn the knob to the standby mode.

The self-cleaning function flushes the hose and handle.

Emptying and Cleaning Wastewater Tank

1. Remove the water tank assembly from the main unit.
2. Note: The wastewater level must not exceed the maximum fill line.
3. Empty the wastewater from the dirty water tank.
4. Clean the inner wall of the wastewater tank and the tank lid with clean water.
5. After cleaning, reinstall the tank lid and ensure the sealing ring is properly seated.
6. Reinstall the water tank vertically onto the main unit and press firmly to secure it in place.

Regularly empty and clean the wastewater tank.

Storage

1. Wrap the hose around the body of the main unit once and secure the brush head in its mount.
2. Wrap the power cord around the unit and secure it with the hook-and-loop strap on the main unit's carrying handle.
3. The compact body allows for easy storage in cabinets or other suitable spaces.

Proper storage ensures longevity and convenience.

6. Troubleshooting

Before contacting maintenance services, check the following points:

Other faults requiring special tools must be repaired or replaced at authorized service centers.

7. Product Specifications

8. Warranty and Support

The UWANT Y100 Portable Carpet Cleaner Machine comes with a 2-year warranty.

For any issues not covered in the troubleshooting section or for warranty claims, please contact authorized service centers or the manufacturer's customer support. Refer to the product guide card included in the box for specific contact details.

9. User Tips

• For best results, pre-treat stubborn stains with a suitable cleaning solution before using the machine. Always test cleaning solutions on an inconspicuous area first.
• Regularly clean both the clean and dirty water tanks to prevent odor and maintain optimal performance.
• Ensure the water tank sealing ring is correctly positioned to avoid any suction issues.