1. Introduction
Thank you for choosing the Flipsky E-Jet Pump Thruster. This high-performance underwater thruster is designed for marine applications, offering powerful and efficient propulsion for kayaks and other watercraft. This manual provides essential information for the safe and effective setup, operation, and maintenance of your thruster.

2. Safety Information
Please read all safety warnings and instructions carefully before using the product. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Always ensure the thruster is securely mounted before operation.
- Keep hands, hair, loose clothing, and other objects clear of the propeller during operation.
- Do not operate the thruster out of water for extended periods, as this can lead to overheating.
- Ensure all electrical connections are waterproof and properly insulated to prevent short circuits.
- Use only recommended voltage and current specifications to avoid damage to the motor and ESC.
- Disconnect power before performing any maintenance or inspection.
- This product is certified for water-skiing activities. Always adhere to local regulations and safety guidelines for water sports.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- E-Jet Pump Thruster unit
- Mounting bracket
- Selected Electronic Speed Controller (ESC): FSESC75450 or FSESC110400 (Water-cooled)
- Optional: VX3 Remote Control (if selected model includes it)
- Necessary cables and connectors (e.g., 10.0mm banana male plugs, 3*6AWG wiring)
- User Manual (PDF available online)
Note: Battery is not included and must be purchased separately.

4. Specifications
4.1 General Thruster Specifications
- Voltage Range: 6S-20S (24-84V)
- Rated Power: 4400W
- Maximum Power: 8800W
- Waterproof Rating: IP68
- Material: Aluminum alloy (Motor mounting bracket, pump body, fin mounting bracket, propeller)
- Certification: CE
- Outdoor Activity: Water-skiing
4.2 Motor (85165-150KV) Specifications

- Model: 85165-150KV waterproof
- Voltage: 6-24S
- Rated Current: 165A
- Maximum Current: 330A
- Rated Power: 8200W
- Maximum Power: 19500W
- Rated Torque: 12.6Nm
- Maximum Torque: 26.0Nm
- Wiring: 3*6AWG (8.5mm)
- Connectors: 10.0mm banana male plug
- Additional: Temperature transmission line x8
4.3 Electronic Speed Controller (ESC)
- Models: FSESC75450 Water-cooled ESC / FSESC110400 Water-cooled ESC
- Drive Method: UART
4.4 VX3 Remote Control (Optional)
- Control Mode: UART
- Remote Distance: 25 meters (straight line, interference-free)
- Waterproof Rating: IP68
- Adjustable Speed Settings: 3 levels (L/M/H), H level is the highest
- Functions: Cruise control, GPS, Speed display, Battery level display
4.5 Performance Data (Thrust Test)
| Power (W) | Thrust (KG) |
|---|---|
| 500 | 8 |
| 1000 | 14 |
| 1500 | 19 |
| 2000 | 24 |
| 2500 | 28 |
| 3000 | 32 |
| 3500 | 35 |
| 4000 | 38 |
| 4400 | 43 |
Speed: The specific speed depends on the type of boat and the environment in which it is used. The actual speed measured on calm water with a paddleboard is approximately 30 km/h.
5. Setup and Installation
Proper installation is crucial for the performance and safety of your E-Jet Pump Thruster. Ensure you have all necessary tools and follow these steps carefully.
5.1 Mounting the Thruster
- Identify a suitable mounting location on your watercraft (e.g., kayak, paddleboard) that allows for optimal water flow and thrust direction.
- Attach the provided mounting bracket to the thruster unit using the appropriate fasteners.
- Securely fasten the thruster assembly to your watercraft. Ensure the mounting is rigid and can withstand the thrust forces during operation.
- Verify that the thruster is submerged to the correct depth for efficient operation and that the propeller is clear of any obstructions.

5.2 Electrical Connections
- Connect the motor's 3*6AWG wires to the corresponding output terminals of the ESC. Use the 10.0mm banana male plugs for a secure connection.
- Connect the ESC to your battery pack (6S-20S, 24-84V). Ensure correct polarity.
- If using the VX3 remote control, connect it to the ESC via the UART port.
- Ensure all connections are waterproofed and protected from the marine environment.

6. Operating Instructions
Once the thruster is installed and connected, follow these steps for operation.
6.1 Initial Power-Up
- Ensure the thruster is fully submerged in water.
- Power on your battery pack. The ESC will initialize.
- If using the VX3 remote, power it on and ensure it is paired with the ESC.
6.2 Using the VX3 Remote Control
The VX3 remote control offers various functions for precise control:
- Speed Adjustment: Use the speed settings (L/M/H) to select your desired propulsion level. H is the highest speed.
- Cruise Control: Engage cruise control for consistent speed without continuous throttle input.
- GPS Functionality: The remote can display GPS data, including speed.
- Battery Level Display: Monitor your battery's charge level directly from the remote.
6.3 Operation Tips
- Start with the lowest speed setting (L) and gradually increase as needed.
- Avoid operating the thruster in shallow water or areas with heavy debris to prevent damage to the propeller.
- Regularly check the battery level to avoid being stranded.
7. Maintenance
Regular maintenance will prolong the life and ensure optimal performance of your thruster.
7.1 After Each Use
- Rinse the thruster thoroughly with fresh water to remove salt, sand, and other contaminants.
- Inspect the propeller for any damage or entanglement (e.g., fishing line, weeds). Carefully remove any debris.
- Check all electrical connections for corrosion or loose fittings.
- Ensure the mounting bracket is still secure.
7.2 Periodic Maintenance
- Lubricate any moving parts or seals as recommended by the manufacturer (refer to the full PDF manual for specific lubrication points).
- Inspect the motor and ESC for any signs of wear, damage, or overheating.
- Check the integrity of all wiring and insulation.
8. Troubleshooting
This section addresses common issues you might encounter with your E-Jet Pump Thruster.
| Problem | Possible Cause | Solution |
|---|---|---|
| Thruster does not start | No power to ESC; Loose connections; Remote not paired; Damaged motor/ESC | Check battery connection and charge; Secure all wiring; Re-pair remote; Contact support if components are damaged. |
| Reduced thrust/performance | Propeller fouled/damaged; Low battery; Incorrect speed setting; Water ingress in motor | Inspect and clean/replace propeller; Charge battery; Adjust speed setting; Inspect motor for water damage (contact support). |
| Overheating | Operating out of water; Excessive load; Insufficient water cooling for ESC | Ensure thruster is submerged; Reduce load; Verify ESC water cooling system is functioning. |
| Remote control not responding | Out of range; Low remote battery; Interference; Not paired | Move closer to thruster; Charge/replace remote battery; Avoid interference sources; Re-pair remote. |
9. User Tips
- Always ensure your battery is fully charged before heading out, especially for longer trips.
- Consider carrying a spare propeller and the necessary tools for quick replacement in case of damage.
- Familiarize yourself with the remote control's functions, especially cruise control, to optimize battery life and ease of use.
- When storing the thruster for extended periods, ensure it is clean, dry, and disconnected from the battery.
10. Warranty and Support
10.1 Warranty Policy
The warranty period for consumable electronic products (e.g., ESC, Motor, Battery) is generally 2 months from the 7th day after shipment, as verified by logistic record. For non-electronic products, the warranty period is also 2 months from the 7th day after shipment.
If a product requires repair or replacement, please contact customer service. If the product is not repairable, a replacement will be provided (shipping costs may apply). The warranty does not cover:
- Products without proof of purchase channel.
- Mechanical damage to electronic components or PCBs.
- Water damage or external impact damage.
- Abnormal operation beyond product specifications.
- Products purchased from unauthorized channels.
Most products are tested before shipment. For VESC/Motor settings or information, please contact the seller. The seller is not liable beyond the actual purchase price of the product. Repair service for out-of-warranty products is available for a reasonable charge.
10.2 Further Assistance
For detailed instructions, specific settings, or further assistance, please refer to the official user manual PDF available at: Flipsky E-Jet Pump Thruster User Manual (PDF). You can also contact Flipsky Official Store customer service for support.