1. Product Overview
The WRWD Wireless CarPlay & Android Auto Interface Module is designed to seamlessly integrate Apple CarPlay and Android Auto functionalities into your Audi's original MIB/MIB2 infotainment system. This module offers a lossless installation, allowing you to enjoy modern smartphone features like navigation, music, and communication directly on your car's display while retaining all original vehicle functions.
Key Features:
- Wireless and Wired CarPlay support for iPhone users.
- Android Auto support for Android phone users.
- Integration with original iDrive and steering wheel controls.
- Support for OEM voice commands (e.g., Siri).
- Reversing video input for aftermarket cameras.
- Plug and Play installation.

2. Compatibility
This module is compatible with specific Audi models and years equipped with MIB/MIB2 systems. It is crucial to verify your car's screen size and system version for correct module selection.
Compatible Audi Models and Years:
- A3/S3: 2013-2018 (5.8/7 inch screens)
- A4L: 2017-2018 (7/8.3 inch screens)
- A5: 2017-2018 (7/8.3 inch screens)
- Q2L: 2018 (7/8.3 inch screens)
- Q5L: 2018 (7/8.3 inch screens)
- Q7: 2016-2018 (7/8.3 inch screens)
2.1 How to Confirm Your Car System Version and Screen Size
To ensure you have the correct module, follow these steps to check your car's system version and screen size:
- Press the 'Setup' or 'Menu' button on your car's radio.
- Navigate to 'Settings'.
- Scroll down to 'Version Information'.
- Look for the first letters and numbers of the software version (e.g., HNAV-XX-XXXXX-XX).
The screen size refers to the actual display area, not the entire unit. If you are unsure, please contact customer support with your car's model, year, and a photo of your 'Version Information' screen.



3. Package Contents
Please check the box for the following items:
- CarPlay Module (Main Unit)
- Power Cable
- WiFi Antenna
- LVDS Cable
- Microphone (MIC)

4. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Quiescent Current | Less than 3mA (Clock is on) |
| Charging Current | ≤2A (If USB charging current > 1A, the host activates circuit protection to control current below 1.5A to prevent damage) |
5. Setup and Installation
Installation of this module requires careful attention to wiring and DIP switch settings. It is recommended to consult a professional if you are not comfortable with car electronics installation.
5.1 DIP Switch Settings
The DIP switches on the module must be set according to your specific Audi model and screen size. Refer to the table below:
| Car Model | DIP 1 | DIP 2 | Screen Size | DIP 3 | DIP 4 |
|---|---|---|---|---|---|
| A3/S3/Q2L | OFF | OFF | 400*240 5.8" | OFF | OFF |
| 2017-A4/A5/S5/Q5/Q7 | OFF | ON | 800*480 7" | OFF | ON |
| 1024*480 8.3" | ON | OFF |

5.2 Wiring Diagram (Example 1: ADM12 A3)
This diagram illustrates the connections for the ADM12 module in an Audi A3. Ensure all cables are securely connected.

5.3 Wiring Diagram (Example 2: Audi MIB2)
This diagram provides a detailed overview of the connections for Audi MIB2 systems. Pay close attention to the LVDS and power connections.

5.4 Control Instructions
The module supports control via your car's original steering wheel buttons and central control knob.
Steering Wheel Buttons:
- Short press to connect/hang up phone.
- Long press to activate language control (without using the original car BT).
- Turn down/up volume.
- Press left/right to move up/down.
Central Control Knob:
- Long press to switch systems.
- Rotate the knob to move the cursor; short press to confirm.
- Long press to confirm activation of voice control.
- Long press for 15 seconds to restart the system.
5.5 Adding Reversing Camera Wiring
- CAM-POWER: Connect to camera power.
- REAR-CVBS/AHD720P (25FPS/30FPS): Connect to camera input.
6. Operating Instructions
6.1 Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth settings.
- On the car's display, navigate to 'Wireless CarPlay Settings' and select 'Discover and connect devices'.
- Find the corresponding device name (e.g., "CX_BT.....") on your iPhone and click to pair.
- Click 'Allow' on the pairing prompt and wait for the connection to establish.
- Once connected, CarPlay will launch automatically.

6.2 Wireless Android Auto Connection
- On your Android phone, open Wi-Fi and Bluetooth settings.
- On the car's display, navigate to 'Wireless Android Auto Settings' and select 'Discover and connect devices'.
- Find the corresponding device name (e.g., "CX-BTXXXX") on your Android phone and click to pair.
- Click 'Allow' on the pairing prompt and wait for the connection to establish.
- Once connected, Android Auto will launch automatically.

6.3 Car Settings
- Reverse Camera: If a reverse camera is added, the original camera will be turned off.
- Audio Setting: If the original car has Bluetooth phone functionality, there is no need to add a microphone. Set 'Setup' -> 'Audio Settings' -> 'Use the original Bluetooth audio' to OFF.
- Original Multimedia Selection: Set to AUX.
6.4 Video Demonstration
Watch this video for a visual guide on connecting and using the WRWD module.
7. Maintenance
The WRWD module is designed for low maintenance. Keep the unit free from dust and moisture. Avoid exposing it to extreme temperatures. No user-serviceable parts are inside the module. For any issues, refer to the troubleshooting section or contact support.
8. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
- Screen Display Issues: If the screen does not display normally, check the LVDS cable connection and verify the DIP switch settings are correct for your car model and screen size.
- Sound Problems: If there are sound issues, ensure that the multimedia settings and the installed system settings of the original car are correct. Specifically, check that the original car's audio is set to AUX.
- Mainframe Pilot Lamp Not Working: If the mainframe's pilot lamp is not working, check the power cable connection and the fuse to ensure they are normal.
9. User Tips
Based on user experiences, here are some helpful tips for installation and usage:
- Glove Compartment Installation: Installation in Audi A3 models may require removing the glove compartment. Users suggest that the module can fit easily above the glove compartment if cables are routed properly.
- MMI Removal Keys: The kit does not include keys for removing the MMI unit. These need to be purchased separately for installation.
- Audio Settings: For wireless connections, it's best to set the car's audio to AUX. When pairing your phone, ensure the car's Bluetooth system is used for calls, and if prompted, set the module's Bluetooth (e.g., "car***") as an "other" device type to prevent calls from switching to it.
- AMI Interface: If your car has an AMI interface without AUX, you might need to connect a cable or code the port as AUX.
- LVDS Cable: For some MIB1 standard (MSTD) systems, ensure the LVDS cable is connected to the pink port, not the yellow one, to get an image.
- Smooth Operation: CarPlay is generally smooth and responsive. Original car controls like the microphone, rearview camera, and steering wheel buttons are retained.
10. Warranty and Support
Warranty information and specific support contacts are not provided in the available product data. Please refer to your purchase documentation or contact the seller directly for details regarding warranty, returns, and technical support.
A user manual in PDF format is available for additional guidance: View User Manual (PDF)