MEGAREVO R6KL1-G2

Contents

Megarevo R6KL1-G2 6kW Single Phase Home Hybrid Solar Inverter

Model: R6KL1-G2 | Brand: MEGAREVO

1. Introduction

This manual provides essential information for the safe and efficient operation of your Megarevo R6KL1-G2 6kW Single Phase Home Hybrid Solar Inverter. This inverter is designed for residential energy storage systems, offering reliable power conversion and management for solar installations. Please read this manual thoroughly before installation and operation, and keep it for future reference.

Front view of the Megarevo R6KL1-G2 inverter
Figure 1: Front view of the Megarevo R6KL1-G2 Hybrid Solar Inverter.

2. Setup and Installation

Proper installation is crucial for the performance and safety of your inverter. It is recommended that installation be performed by a qualified professional.

2.1. Physical Dimensions and Placement

  • Dimensions (W*D*H): 454.5 mm * 200 mm * 467 mm
  • Net Weight: 22 kg (23 kg with generator)
  • Ingress Protection: IP65 (suitable for outdoor installation)
  • Cooling: Natural convection
  • Operating Altitude: Up to 2,000 m (derating above 2,000 m)
  • Operating Temperature: -25℃ to 60℃
  • Relative Humidity: 0 ~ 95% (non-condensing)

Ensure adequate clearance around the inverter for natural cooling. Avoid direct sunlight and areas with excessive dust or moisture.

Megarevo R6KL1-G2 inverter with dimensions
Figure 2: Product dimensions of the Megarevo R6KL1-G2 inverter.

2.2. Wiring Diagrams and System Overview

The inverter supports various operation modes, including configurations with and without battery storage. Refer to the diagrams below for typical wiring setups.

Operation mode diagrams for the hybrid solar inverter, showing configurations with and without battery, and different power availability scenarios.
Figure 3: Operation mode diagrams. Top left: With battery, Solar and AC power available. Top right: With battery, Solar and AC power not available. Bottom left: Without battery, AC power available. Bottom right: Without battery, Solar power available.
System animation display showing solar panels, inverter, battery, and household appliances.
Figure 4: Animated display of a typical solar energy storage system with inverter, solar panels, battery, and household appliances.

2.3. Application Scenarios

The Megarevo R6KL1-G2 inverter is versatile and suitable for various applications requiring reliable power supply and energy storage.

Usage scenarios for the inverter, including villa, communication base station, nomadic area, farm, field power supply, and household.
Figure 5: Common usage scenarios for the inverter, including residential (villa, household), commercial (communication base station), and remote applications (nomadic area, farm, field power supply).

3. Operating Instructions

The inverter features an intuitive interface for monitoring and control. The display is optional, offering either a colorful touch screen or a standard screen.

3.1. Display and Monitoring

The inverter can be equipped with an optional colorful touch screen or a standard display for real-time monitoring of system status, power generation, battery charge, and other parameters. Consult the on-screen menu for detailed information and settings.

3.2. Communication Interfaces

The inverter supports various communication protocols for remote monitoring and management:

  • RS485: For local communication with monitoring devices.
  • CAN: For battery management system (BMS) communication with compatible batteries.
  • WIFI / GPRS: Optional modules for remote monitoring via mobile applications or web platforms.
  • DRM: Demand Response Management interface.

Refer to the specific communication module's manual for setup and configuration details.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter. Always disconnect power before performing any maintenance.

4.1. Routine Checks

  • Inspect the inverter for any visible damage, corrosion, or loose connections.
  • Ensure ventilation openings are clear of dust and debris.
  • Check the display for any error messages or warnings.
  • Monitor system performance through the display or communication interface to detect anomalies.

4.2. Cleaning

Clean the exterior of the inverter periodically with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the cooling fins are free from obstructions.

5. Troubleshooting

This section provides general guidance for common issues. For complex problems, contact technical support.

5.1. Common Issues

  • No Power Output: Check AC and DC connections, ensure solar panels are receiving sunlight, and verify battery charge level if applicable.
  • Error Codes on Display: Refer to the inverter's on-screen manual or contact support with the specific error code.
  • Reduced Performance: Check for shading on solar panels, ensure all connections are secure, and verify battery health.

Always ensure safety precautions are followed before attempting any troubleshooting steps.

6. Specifications (Model: R6KL1-G2)

Category Parameter Value (R6KL1-G2)
PV String Input
Max. Input PowerkW9
Start-up VoltageV100
Max. PV Input VoltageV550
MPPT Range/NominalV80~500/360
Max. Input Current of Single MPPTA16/16
Max. Short Circuit CurrentA18.5*2
AC Output
Rated PowerkW6
Max. AC Current Output to GridA28.7
Nominal Voltage/RangeV230 /176~270
FrequencyHz50 /60
Power Factor1 (0.8 leading - 0.8 lagging)
THDi<2%
AC Grid TypeL+N+PE
Battery
Battery Voltage RangeV40~58
Max. Charging VoltageV58
Max. Charge/Discharge CurrentA120/120
Battery TypeLithium / Lead-acid
Communication InterfaceCAN/RS485
EPS Output
Rated PowerkW6
Rated VoltageV230
Max. AC Current Output to GridA28.7
Rated FrequencyHz50/60
Automatic Switchover Timems<10
THDu<2%
Overload Capacity110%, 60S/ 120%, 30S/ 150%, 10S
General Data
Battery Charge/Discharge Efficiency96%
PV Max. Efficiency98%
Europe Efficiency97%
MPPT Efficiency99.9%
Ingress ProtectionIP65
Noise EmissiondB<35
Operation Temperature℃-25~ 60
CoolingNatural
Relative Humidity0 ~95% (non-condensing)
Operating Altitudem2,000 (>2,000 Derating)
Dimensions W*D*Hmm454.5*200*467
Net Weightkg22 (23 With generator)
TopologyNon-isolated
Standby LossW<15
DisplayOptional (colorful touch screen /no screen)
Interface: RS485 / Wifi / 4G / CAN / DRMYes/ Opt/ Opt/ Yes/ Yes

7. User Tips

  • For optimal performance, ensure your solar panels are regularly cleaned and free from shading.
  • If using a battery, monitor its health and charge cycles through the inverter's display or monitoring app.
  • Consider installing the optional WIFI/GPRS module for convenient remote monitoring and system adjustments.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model (R6KL1-G2) and serial number ready when contacting support.

The manufacturer, Hunan Langle New Energy Technology Co., Ltd., specializes in R&D and manufacturing of lithium-ion battery cells and battery systems, indicating expertise in the field.

© 2024 MEGAREVO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.