SAMOLLA CEVONA

Contents

SAMOLLA Ultralight Baitcasting Reel User Manual

Model: CEVONA

1. Introduction

Thank you for choosing the SAMOLLA Ultralight Baitcasting Reel, Model CEVONA. This high-performance fishing reel is designed for both freshwater and saltwater environments, offering a lightweight yet durable solution for anglers. Featuring an advanced STB Brake System, a high gear ratio, and smooth bearings, it aims to provide an exceptional and tangle-free casting experience. This manual will guide you through the proper setup, operation, and maintenance to ensure the longevity and optimal performance of your reel.

2. Key Features

  • Ultralight Design: Weighing approximately 149g, designed for comfortable, extended use.
  • STB Brake System: Adaptive brake adjustment system with real-time automatic matching of brake size. Features a floating magnetic design for uniform brake force, smoother throwing, and reduced wire entanglement.
  • Wide Angle Outlet Hole: An extra-large outlet hole design ensures smoother line output, reduces deviation, improves throwing accuracy, and minimizes friction between the line and guide ring to increase casting distance.
  • AT7 Series Hardened Aluminum Alloy Gear Disc: Precision machined and cut aluminum large gear disc, hardened for enhanced durability.
  • Suspended Small Gear Disc Technology: Incorporates bearing support at both ends of the small teeth, ensuring near-zero friction during rotation, improving throwing distance, and enabling long-range casting with minimal weight.
  • Clear Sound Device (DST Drag Sound): Provides accurate acoustic feedback to help identify fish information during a fight.
  • One-Handed Operation: Low center of gravity design (37mm/1.45in) for easy and comfortable single-handed use.
  • CONTIX Mixed Carbon Fiber: Constructed with polymer composite materials for high tensile strength, impact resistance, and pressure resistance.
  • Smooth Bearing System: Equipped with 8+1BB (Ball Bearings) for exceptionally smooth operation.
  • Brass Gear: Durable brass gears for reliable performance.

3. Setup Guide

Before using your SAMOLLA Baitcasting Reel, ensure it is properly prepared for optimal performance.

3.1. Preparation

  • Tools: Have a Phillips screwdriver, flathead screwdriver, tweezers, cotton swabs, soft cloth, bearing oil, gear grease, and cleaning alcohol ready.
  • Environment: Work in a clean, windless, and well-lit area to prevent losing small parts.
  • Safety: Remove the spool and fishing line from the reel before any adjustments or maintenance.

3.2. Spooling the Line

Properly spooling your fishing line is crucial for casting performance. Follow the line manufacturer's instructions for spooling. Ensure the line is wound evenly and tightly on the spool to prevent tangles and improve casting distance.

3.3. Mounting the Reel

Attach the reel securely to your fishing rod's reel seat. Ensure it is firmly seated and does not wobble during use.

4. Operating Instructions

4.1. Casting

  1. Adjust the Brake System: The STB Brake System allows for adaptive adjustment. Start with a higher brake setting to prevent backlashes, especially if you are new to baitcasting. Gradually reduce the setting as you become more proficient.
  2. Thumb Control: Use your thumb to feather the spool during the cast to control line flow and prevent overruns.
  3. Release: Press the thumb bar to disengage the spool, then release your thumb as you begin your forward casting motion.
  4. Line Output: The wide-angle outlet hole ensures smooth line release, reducing friction and improving casting distance and accuracy.

4.2. Retrieving

  1. Engage the Spool: Turn the handle to re-engage the spool after casting.
  2. Retrieve Line: Turn the handle to retrieve your line. The 7.2:1 gear ratio allows for fast retrieval, ideal for various lure presentations.
  3. Drag Adjustment: Adjust the star drag to control the tension on the line when fighting a fish. Ensure it is set appropriately for your line strength and target species.

5. Maintenance

Regular maintenance is crucial for the longevity and performance of your baitcasting reel. For a printable version of the maintenance manual, please refer to the official PDF document: User manual (PDF)

5.1. Basic Daily Maintenance (After Every Use)

  1. Rinse off any sand, mud, and salt with clean water, then wipe the reel dry.
  2. Open the side cover, remove the spool, and air-dry the spool and bearings.
  3. Check if the handle, knob, and line guide work smoothly.
  4. For minor noise, apply 1-2 drops of bearing oil to the spool bearings.

5.2. Full Disassembly Maintenance (Every 1-3 Months)

  1. Remove side cover and spool: Loosen the side cap, take out the spool, and clean the bearings.
  2. Remove handle and star drag: Unscrew the handle screw, then remove the star drag and brake pads.
  3. Open main body side cover: Remove side screws to open the gear compartment.

5.3. Cleaning

  • Use cotton swabs and cleaner to remove old oil, dirt, and metal shavings from all components.

5.4. Lubrication

  • Gears and drive system: Apply a small amount of gear grease.
  • Spool bearings and micro-adjust bearings: Apply bearing oil.
  • Handle shaft and clutch parts: Apply a thin layer of lubricant.

5.5. Reassembly

  • Reinstall parts in reverse order. Do not overtighten screws.

5.6. Testing

  • Install the spool, adjust the brakes, and test rotation. Ensure there is no noise or blockage.

5.7. Warnings & Important Notes

  • Do not use gasoline, thinner, or strong solvents as they can damage plastic and seals.
  • Avoid over-lubricating, which attracts dust and causes jamming.
  • Do not pry or force parts; this may cause deformation.
  • After saltwater fishing, rinse immediately to prevent corrosion.
  • If bearings make noise or spin poorly, clean and oil them first before replacing.
  • Occasional freshwater fishing: Every 2-3 months.
  • Frequent freshwater fishing: Every 1 month.
  • Saltwater or rocky areas: Basic maintenance after every use, full maintenance monthly.

6. Troubleshooting

This section addresses common issues you might encounter with your baitcasting reel.

  • Reel is noisy or spins poorly: This often indicates a need for cleaning and lubrication. Refer to the maintenance section (5.3 and 5.4) to clean and oil the bearings.
  • Line entanglement or backlashes: Ensure your STB Brake System is properly adjusted for your casting style and lure weight. Start with a higher brake setting and gradually decrease it. Practice thumb control during casting.
  • Stiff or difficult-to-turn handle/knob: Check for dirt or debris accumulation. Perform basic daily maintenance (5.1) or full disassembly maintenance (5.2) if necessary. Lubricate moving parts as described in 5.4.
  • Corrosion after saltwater use: Always rinse your reel immediately with clean fresh water after saltwater exposure to prevent corrosion. Follow the recommended maintenance schedule for saltwater use (5.8).
  • Parts not moving smoothly or feeling forced: Never pry or force parts, as this can cause deformation. If a part is stuck, disassemble carefully and inspect for obstructions or damage.

7. Specifications

FeatureDetail
ModelCEVONA
BrandSAMOLLA
Weight149g
MaterialNylon, Mixed Carbon Fiber
Brake SystemSTB Brake System (Adaptive Magnetic)
Gear Ratio7.2:1
Bearings8+1BB
Max Drag5KG
Baits TypeFake Bait
Fishing Reels TypeBaitcast Reel
Fishing MethodBait Casting, Throw, Iron Plate
PositionOcean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream, Management Field
OriginMainland China
Line Capacity (Shallow Spool)0.8#/110M, 1#/100M
Line Capacity (Standard Spool)1#/130M, 1.5#/110M

7.1. Visual Specifications

SAMOLLA CEVONA Baitcasting Reel Parameters
Detailed parameters for the SAMOLLA CEVONA Baitcasting Reel, including model, weight, bearings, gear ratio, max drag, and line capacities for shallow and standard spools.

8. User Tips

Here are some practical tips from experienced users to enhance your fishing experience with the SAMOLLA Baitcasting Reel:

  • This reel is well-suited for practice and handling lighter lures, with users reporting good performance with lures around 2 grams.
  • Regular greasing and bearing oiling are highly recommended to maintain smooth operation and extend the reel's lifespan. Consider this an essential part of your routine maintenance.
  • While the drag width might appear narrow to some, the reel generally performs very well, offering great value for its price.

9. Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty validation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.