1. Product Overview
The Estardyn 0-30V 2mA-3A Adjustable DC Regulated Power Supply DIY Kit is designed for electronics enthusiasts, beginners, and for educational purposes. This soldering kit allows users to build a stable and fully protected linear DC power supply. It features a continuously adjustable output voltage from 0V to 30V and an adjustable output current from 2mA to 3A. The circuit incorporates overcurrent and short-circuit protection, making it a reliable tool for various electronic projects and laboratory use. Its design ensures a low-ripple output, suitable for sensitive applications.
This circuit voltage can be adjusted from 0V, and the output current can be continuously adjusted from 2mA to 3A. If the experimental circuit exceeds the set current (including short circuit), the circuit protection activates immediately, preventing damage to devices. It is an ideal tool for electronic manufacturing and can also be configured as a dual power supply by connecting two units in series, meeting diverse application needs.
2. Specifications
| Parameter | Value |
|---|---|
| Input Voltage | AC 18V-24V |
| Output Voltage | DC 0V-30V (Continuously Adjustable) |
| Max Output Current | 3A (Adjustable from 2mA) |
| Protection | Overcurrent, Short Circuit |
| Output Type | Linear Regulated (Low Ripple) |
| Accessory Type | Extension Board |
| Typical Application Fields | Education and Learning |
| Battery Included | No |
| Origin | Mainland China |
| Package Length | 14 cm |
| Package Width | 12 cm |
| Package Height | 2 cm |
| Package Weight | 0.082 kg |
3. Setup and Assembly Guide
Assembly of the Estardyn Adjustable DC Regulated Power Supply DIY Kit requires careful soldering and attention to component orientation. Follow these steps:
- Component Identification: Before starting, identify all components provided in the kit. Refer to the component list and the PCB layout diagram.

- Soldering Components: Solder all components to the Printed Circuit Board (PCB) according to the silk screen marks. It is crucial to strictly observe the polarity of diodes, electrolytic capacitors, and transistors. Incorrect polarity can damage components or prevent the circuit from functioning.


- Heat Sink Installation: After soldering the power transistor, install the heat sink onto it. This is vital for dissipating heat and ensuring the longevity of the power transistor.
- External Transformer Connection: Connect an external 18V-24V AC transformer to the input terminals of the assembled board. Note: The AC power transformer is NOT included and must be prepared separately.
Important Notes for Assembly:
- AC power transformer is NOT included; you need to prepare it separately.
- Pay attention to the polarity of all polarized components during soldering.
- Do not exceed the maximum output current of 3A to avoid component damage.
- Always disconnect the power before adjusting the internal circuit.
4. Operating Instructions
Once assembled and connected to a suitable AC transformer, the power supply can be operated as follows:
- Power On: Ensure all connections are secure before applying power.
- Voltage Adjustment: Use the left potentiometer to set the desired output voltage. The output voltage is continuously adjustable from 0V to 30V DC.
- Current Limit Adjustment: Use the right potentiometer to set the current limit. The output current can be limited from 2mA to 3A. This feature protects your experimental circuit from overcurrent conditions.
- Protection Activation: If the experimental circuit exceeds the set current limit (including short-circuit conditions), the power supply's protection circuit will activate immediately, preventing damage to connected devices.
5. Maintenance
To ensure the longevity and optimal performance of your power supply kit, follow these maintenance guidelines:
- Cleaning: Keep the PCB and components free from dust and debris. Use a soft brush or compressed air for cleaning.
- Inspection: Periodically inspect solder joints for any signs of cold joints or cracks. Re-solder if necessary.
- Heat Sink: Ensure the heat sink remains firmly attached to the power transistor and is free from obstructions to allow proper airflow.
- Storage: Store the power supply in a dry, cool environment when not in use.
6. Troubleshooting
If you encounter issues with your Estardyn DC Regulated Power Supply DIY Kit, consider the following troubleshooting steps:
- No Output Voltage/Current:
- Verify the input AC voltage from your transformer is within the 18V-24V range.
- Check all solder joints for continuity and proper connection, especially for polarized components like diodes, capacitors, and transistors. Incorrect polarity is a common issue.
- Ensure all components are correctly placed according to the PCB markings.
- Inspect for any short circuits on the PCB.
- Incorrect Voltage/Current Adjustment:
- Ensure the potentiometers are correctly installed and functioning.
- Check the values of resistors and other passive components against the schematic (if available) or component list.
- Overcurrent/Short Circuit Protection Constantly Triggering:
- Verify the current limit potentiometer setting. It might be set too low.
- Check the connected load for any short circuits or excessive current draw.
- Missing Components:
- Upon receiving the kit, carefully verify all components against the provided parts list. If any components are missing or incorrect (e.g., wrong resistor values, missing ICs), contact the seller for replacements. One user reported missing components (resistors, capacitor, 7812) and extra screws. It is crucial to perform a thorough inventory check before assembly.
7. User Tips
Based on user experiences, here are some tips for building and using your DIY power supply:
- Component Verification: Before starting assembly, meticulously check all components against the parts list. Some users have reported receiving kits with missing or incorrect components.
- Soldering Practice: If you are new to soldering, practice on a scrap board first. Good solder joints are critical for the circuit's reliability.
- Polarity is Key: Always double-check the polarity of diodes, electrolytic capacitors, and transistors before soldering.
- External Transformer: Remember that the AC power transformer is not included. Plan for a suitable 18V-24V AC transformer.
- Safety First: Always disconnect power before making any adjustments to the internal circuit or connecting/disconnecting loads.
8. Frequently Asked Questions (FAQ)
- Q: Is the AC transformer included?
A: No, the AC power transformer is not included and needs to be sourced separately. It should provide 18V-24V AC. - Q: What is the maximum output current?
A: The maximum output current is 3A, continuously adjustable from 2mA. - Q: Can this kit be used by beginners?
A: Yes, it is designed for electronics beginners and for soldering practice, but requires careful attention to detail during assembly. - Q: What kind of protection features does it have?
A: It includes overcurrent and short-circuit protection to safeguard connected circuits and the power supply itself. - Q: What if I receive missing components?
A: It is recommended to check all components against the parts list upon arrival. If any are missing, contact the seller for assistance.
9. Warranty and Support
For warranty information, technical support, or inquiries regarding replacement parts, please contact the seller directly. Keep your purchase records for reference.
For additional documentation, you may refer to the original user manual PDF: User manual (PDF)