1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your MEKEDE 10.25-inch Android 14 Car Radio. Designed for BMW 3 Series E90, E91, E92, E93 models, this multimedia player offers advanced features including wireless CarPlay, Android Auto, GPS navigation, and a powerful 8-core processor for a seamless in-car experience. Please read this manual thoroughly before use and keep it for future reference.
2. Safety Information
For your safety and to prevent damage to the device or vehicle, please observe the following precautions:
- Do not watch videos or operate the machine while driving. Adjust the volume to an optimum level.
- If you encounter difficulty operating the machine, stop the car safely before attempting to operate it.
- Keep the machine out of reach of children to prevent injury or damage.
- Adhere to traffic rules when using GPS navigation.
- Do not operate the machine in restricted areas such as petrol stations, wine refineries, or areas with strong electromagnetic obstruction.
- Do not install, maintain, or repair the machine yourself with the power on. Installation and repair should only be performed by personnel with professional training and experience in electronic devices and automobile parts.
- Avoid installing or storing the machine, especially the LED display screen, directly under sunlight or near hazardous substances. Ensure no direct contact with the air-conditioner's ventilation duct, as this can cause damage to the machine, car, or injury.
- Do not use sharp objects to scratch or vigorously press the display screen, as this may cause damage.
- Do not expose the machine to humid weather or direct contact with liquid to prevent fire or electrical hazards.
3. Setup
3.1 Package Contents
Verify that all items are present in the package:
- Machine (Main Unit)
- Packaging Box
- Power Cable
- GPS Antenna
- AUX Cable
- 4G Antenna
- MIC (Microphone)
- USB Cable
- Mouse (Optional, for 360 panorama)
- USB Adapter Cable
- 4G Wi-Fi Antenna
- Operating Instruction (This Manual)

3.2 GPS Antenna Installation Guide
For optimal GPS performance, follow these steps:
- Before affixing the GPS antenna, clean the designated surface thoroughly.
- Remove the adhesive backing from the antenna and firmly press it onto the cleaned surface.
- Route the cable through the storage box to the machine's control panel. Secure the cable with a cable tie.
- Connect the GPS antenna's plug to the machine.
Notes:
- Ensure the system power is off when connecting the GPS antenna.
- Do not shorten or extend the GPS cable, as this may cause malfunction.
- Install the antenna on a leveled surface with minimal radio wave obstruction.
- Avoid interfering with the steering wheel or gear lever.

3.3 Solving No Sound Problem (AUX Connection)
If you experience no sound, follow these steps:
- Connect the original car fiber optic cable to the interface of the conversion line, then connect to the host.
- Connect the AUX cable and switch the mode to "AUX".

3.4 Installation Overview
The unit integrates seamlessly into your BMW's dashboard. Below is a visual comparison of the dashboard before and after installation.

3.5 BMW Original Interface Compatibility
The MEKEDE car radio is compatible with various BMW original systems. Ensure your vehicle's system matches one of the supported configurations for proper functionality.

4. Operating Instructions
4.1 Basic Operations
- Power On / Off: When ACC is connected, press the power button on the front panel to switch on. To switch off, turn off the engine and unplug the car key.
- Volume Adjustment: Use the "+" or "-" buttons on the front panel (or VOL+/VOL- on some models) to adjust the volume.
- Mute Control: Press the left volume button to display the volume bar, then press the media volume to mute.
- Backlight Control: Adjust the backlight in the Display Setting under Car Settings.
4.2 User Interface Overview
The main menu provides quick access to various functions. Swipe left or right to navigate between different home pages and access more applications.


4.3 Dual System Switching
The unit supports free switching between the original car system and the Android 14 system.

4.4 Retained Original Car Functions
The MEKEDE car radio ensures that essential original car functions remain operational after installation.

4.5 UI Style Options
Customize your experience with various UI styles, including ID5, ID6, ID7, and ID8.

4.6 Network & Internet (Wi-Fi Connection)
To connect to Wi-Fi:
- Go to Settings > Network & Internet > Wi-Fi.
- Ensure Wi-Fi is switched ON.
- Select your desired Wi-Fi hotspot from the list.
- Enter the password and touch "Connect".
You can also configure personal hotspot and VPN settings in the "More" section.

4.7 Car Infotainment Settings
Access various car-related settings through the "Settings" menu.
- General Settings: Includes options like Assistant, Dwell timing, Power button ends call, and Touch & hold delay.
- Display Settings: Adjust background brightness for day and night.
- Volume Options: Adjust volume levels for different system functions (e.g., Entertainment, Navigation, Low Pitch, Mid Pitch, High Pitch).
- Sound Effect (DSP 32 EQ Adjustments): Access the equalizer to fine-tune audio output. The unit supports 32 equalizer adjustments.

- Balance Setting: Adjust the volume balance for the four speakers. The black dot indicates the center position. Touch the restore icon to reset to default.
- Loudness Setting: Adjust the loudness to avoid signal loss.
- Video Option: Enable or disable video in motion. It is recommended to enable this option for safety.
- Navigation Setting: Configure navigation sound mode (Close, Reduce, Normal) and select the default navigation application.
- Bluetooth Setting: Manage Bluetooth connections, pairing, calls, and music.
- Maneuver Control: Configure settings related to car maneuvers.
- Astern Rearview (Camera): Configure rearview camera settings, including resolution and display options.
- Original Car Interface Resolution: Ensure the display screen resolution matches the original car's settings for optimal display quality.
4.8 Car Information Service Condition
The unit can display important car information such as speed, fuel level, oil pressure, and safety warnings on the dashboard.

4.9 Built-in CarPlay + Android Auto
The car radio comes with built-in CarPlay and Android Auto functionality, eliminating the need for additional accessories.
- Wireless CarPlay (iOS system):
- Connect Bluetooth.
- Click on "Phone Link" and wait for connection. (CarPlay can also be connected via USB Cable).
- Wireless + Wired Android Auto (Android system):
- Connect the mobile phone and car DVD player with a USB cable.
- Click on "Phone Link" and wait for connection.

4.10 Built-in Bluetooth (BT)
The smart BT system supports mobile phone BT pairing, hands-free dialing, steering wheel button street listening, and accompanying chat to ensure driving safety.

4.11 AHD Reversing Video
The unit supports AHD rear-view video, providing clearer picture quality than ordinary cameras.

4.12 Support OBD II
On-board diagnostics (OBD II) function is available on this unit, allowing you to monitor real-time data and obtain fault codes from your vehicle's computer. OBDII is not included with the unit.

4.13 Built-in 4G LTE and Wi-Fi
The built-in 4G modules allow you to stay connected to fast cellular data networks. You can also use your phone's hotspot to connect to Wi-Fi.

4.14 GPS Navigation
The unit features a built-in global positioning system for omni-directional map display, real-time traffic conditions, and accurate positioning. It supports various navigation apps.

4.15 Support Split Screen
The unit supports displaying two applications on the screen simultaneously for more convenient operation.

4.16 ADAS DVR (Anti-collision Warning Driving Recorder)
The ADAS DVR feature provides front vehicle distance prediction, anti-collision warnings, and lane departure warnings to enhance driving safety. Note: DVR is not included.

4.17 Support TPMS (Tire Pressure Monitoring System)
After correctly installing the TPMS, the sensors will automatically monitor tire pressure and temperature, sending real-time statistics to the receiver.

4.18 Video Demonstration
Watch this video for a demonstration of the product's features and user interface.
5. Maintenance
5.1 Display Screen Instructions
Notes:
- Do not expose the display screen directly under sunlight or heat for prolonged periods.
- Do not expose the display screen directly under sunlight when not in use.
- The display screen should be used within the temperature range of -10℃ to +50℃.
- Storage temperature range: -20℃ to +80℃.
- Avoid pressing the LCD screen vigorously to prevent damage. Touch gently to prevent scratches and dust.
- Small black or bright dots may appear on the LCD screen; this is a specification, not a defect.
- In cold areas, the LCD screen may be dimmer after power on but will adjust to normal after a short while.
- If exposed directly under sunlight, the LCD screen may be difficult to see due to reflection.
5.2 Maintaining the LCD Screen
- Turn off the power before cleaning the LCD screen.
- Wipe the screen with a soft fabric to prevent scratches.
- Do not use wet towels, benzene, or chemical cleaners to clean the LCD screen.
6. Troubleshooting Guide
If you encounter problems, refer to this guide for solutions. If issues persist, contact customer service; do not dismantle the machine.
| Issue | Cause | Action (Reference) |
|---|---|---|
| Unable to power on | Car key not inserted or ACC not turned on | Insert car key and turn on ACC |
| Power cord not connected | Connect power cord correctly | |
| Fuse is damaged | Replace similar fuse | |
| Unresponsive touch screen | System multitasking (e.g., navigation) | Wait a moment. If problem persists, contact customer service. |
| No rear view image | No reverse camera installed | Install reverse camera and plug into CCD socket |
| Reverse camera type does not match | Replace reverse camera | |
| Rear view appears during reverse position even when system is not booted. Power button is null. | Safety feature: rear view function preset for safety priority | Power on to boot system after resuming from reverse position to normal |
| No GPS signal | GPS antenna not connected | Connect GPS antenna correctly |
| Car may be at GPS signal blind spot | Drive for a distance to check GPS signal. If problem persists, contact customer service. | |
| Positioning and navigation failed upon power on | Blind spot of navigation map; remote areas/routes not covered | Contact customer service to update map |
| Unable to locate destination routes | Incorrect spelling of destination; destination not updated in database | Ensure correct spelling; try possible names. If still unable, destination may not be updated. |
| Navigation routes are far | Navigation system sets route based on built-in rules (road grade, traffic rules, flyover, highway, main road, etc.) | The system calculates routes based on various factors. |
| Blank on the map | Scale setting; loss of GPS signal | Try zooming in/out. If problem persists, reset destination or select new landmark. |
7. Specifications
The MEKEDE 10.25-inch Android 14 Car Radio offers robust performance and features:
| Feature | Specification |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Android 14 |
| CPU | 8-Core (MTK6762 1.8GHz or MTK8781) |
| RAM | 6G (Available options: 2G, 4G, 8G, 12G) |
| ROM | 128G (Available options: 64G, 256G, 512G) |
| Display Size | 10.25-inch |
| Resolution | 1920*720 |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Din | Double Din |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2kg |
| Interface | Plug and Play |
| Special Features | Voice Control, DSP, CarPlay, Android Auto, Split Screen, Support steering wheel control |
| Digital Media Format | CD (and others) |
| OSD Language | Multi-language support (Simplified/Traditional Chinese, Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galician, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesian, English, Vietnamese) |
| Certification | CE, FCC |
| Built-in DVD Player | No |
| Built-in CD Player | No |

8. User Tips
- For optimal performance, ensure your device's software is up-to-date. MEKEDE offers free firmware and software updates.
- When connecting to Wi-Fi, double-check the password to avoid connection issues.
- Utilize the split-screen feature for enhanced multitasking, such as running navigation and music simultaneously.
- Take advantage of the DSP (Digital Sound Processor) with 32 EQ adjustments to customize your audio experience to your preference.
- If you experience any sound problems, refer to the AUX connection guide in the Setup section.
- For Bluetooth connectivity, ensure both your phone and the car radio have Bluetooth enabled and are discoverable during pairing.
9. Warranty and Support
Your MEKEDE car radio comes with a 3-year warranty. We are committed to providing continuous support and updates to enhance your experience.

For any issues or support, please contact MEKEDE Europe Flagship Store customer service. We offer free firmware, software, user interface, and GPS navigation map updates.
User Manual PDF: A detailed user manual in PDF format is available for download. Please refer to the official product page or contact support for the link.