Ultenic U18 Power Pro

Contents

Ultenic U18 Power Pro Cordless Vacuum Cleaner User Manual

Model: U18 Power Pro

Important Safety Instructions

Basic precautions should always be observed when using any electrical equipment, including the following:

WARNING:

  • READ ALL SAFETY INSTRUCTIONS AND THE ENTIRE MANUAL. Failure to heed the warnings and instructions may result in electric shock, fire, or serious injuries. Please read all instructions before using this device.
  • This device is intended for children 8 years of age and older. People with reduced physical, sensory, or intellectual abilities, or those who lack experience and knowledge, should be supervised or instructed in safely using the device; they must also be aware of possible hazards. Children should not play with this device. Cleaning and maintenance should not be performed by children without supervision.

To reduce the risk of injury or damage, please observe the following safety precautions when installing, using and maintaining the device:

  • Please read all instructions regarding safety and operation before using the device.
  • Keep the safety and user manual for future reference. If you accidentally lose the manual, you may visit the official website to download the electronic version.
  • Follow all operating and usage instructions.

The product's labels or packaging indicate that:

Do not dispose of electrical appliances as unsorted waste; use a separate waste collector. Contact your local authority for information on the appropriate disposal method. If electrical appliances are discarded in landfills, hazardous substances can leach into groundwater, enter the food chain, and damage people's health. Contact your local or regional waste management agency for more information on their recycling and reuse programs.

Restrictions

  • Please read all contents of this manual carefully before using this product.
  • Please do not use the Ultenic U18 Power Pro to vacuum detergent, kerosene, glass dregs, needles, wet items, sewage, matches and other items.
  • Please do not use the Ultenic U18 Power Pro to vacuum toys, paper balls and other large objects, otherwise it will cause blockage of the Vacuum Cleaner, motor burnout and other failures.
  • Please keep the Ultenic U18 Power Pro away from fire and other hot places.
  • Please make sure to install the filter modules and the roller brush of the floor brush.
  • Please make sure not to block the suction inlet or block the roller brush, as this may cause motor failure when using the Ultenic U18 Power Pro.
  • Please do not pour or spill water or other liquids into the machine to avoid short circuits and burning out the machine.
  • Please fully charge the battery when using a new battery or the battery used for the first time after long-term storage. Please ensure that it is charged and discharged at least every three months when the machine is not used for a long time.
  • The appliance is only to be used with the power supply unit provided with the appliance.
  • The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
  • When cleaning the Ultenic U18 Power Pro, use a dry cloth to wipe it. Do not use gasoline, banana water and other cleaners that are easy to crack or fade the shell.
  • Please do not use or store the Ultenic U18 Power Pro in high temperature, low temperature and other adverse conditions, and do not use them outdoors or on wet surfaces. It is recommended to use them indoors at an ambient temperature of 0-30°C. Please store it in a cool and dry place, and do not expose it to sunlight for a long time.
  • Do not allow children to use or play with the Ultenic U18 Power Pro.
  • When the Ultenic U18 Power Pro cannot work, it must be tested and repaired at the designated service center. Do not disassemble the machine by yourself. Waste battery packs should be safely recycled and disposed of; please do not dispose of them at will.
  • If the power cord is damaged, to avoid danger, you must go to the manufacturer's local maintenance department or similar department to have it replaced by a professional.

Product Overview

The Ultenic U18 Power Pro is a versatile cordless vacuum cleaner designed for efficient cleaning of large homes. It features powerful suction, a long-lasting battery, and an intelligent LED display.

Main Unit Components:

Ultenic U18 Power Pro main unit and accessories

Image: Ultenic U18 Power Pro main unit with various accessories including the motorized floor brush, battery packs, and charging dock.

  • Dust Bucket: Collects dirt and debris.
  • LED Display: Shows battery status, current mode, and alerts.
  • Outlet HEPA: Part of the advanced filtration system.
  • Suction Power Control: Adjusts vacuum power.
  • ON/OFF Button: Powers the unit on and off.
  • Dust Bucket Release Button: For easy emptying.
  • Dust Bucket Cover Release Button: For accessing the filter.
  • Battery Pack Release Button: For battery removal.
  • Battery: Detachable lithium-ion battery.
  • Floor Brush Connector: Connects the floor brush to the folding tube.
  • Folding Tube Adjustment Button: For adjusting the folding tube.
  • Main Body Connector: Connects the main unit to the folding tube.
  • Folding Tube: Allows for ergonomic cleaning under furniture.

Included Accessories:

What's included with Ultenic U18 Power Pro

Image: A visual representation of all components included in the Ultenic U18 Power Pro package.

  • U18 Pro Main Unit
  • Motorized Floor Brush (Anti-tangle V-shaped roller brush)
  • Battery Pack
  • Wide Upholstery Tool
  • Crevice Tool
  • 2-in-1 Brush Head
  • Foldable Tube
  • HEPA Filters (x2)
  • Wall-Mount Charging Dock
  • Power Adapter
  • Cleaning Brush
  • User Manual/Warranty Card
  • Water Tank (for mopping function)
  • Mop Cloth (for mopping function)

Setup and Assembly

Ensure the vacuum cleaner's power supply is shut off before installing or replacing accessories.

Note: The Ultenic U18 Power Pro cannot stand upright without a fixed support. Please place the machine and accessories firmly on a stable surface during assembly.

1. Battery Installation and Removal

  1. Installation: Insert the battery pack into the main body until you hear a click sound from the battery pack release button.
  2. Removal: Press the battery pack release button and pull out the battery pack.

2. Install the Metal Tube and Floor Brush

Connect the metal tube and the floor brush to the main body in turn. A clicking sound from the metal tube connection button and the floor brush connection button indicates a proper connection.

3. Install Accessories

The Ultenic U18 Power Pro comes with various accessories for different cleaning needs:

  • Upholstery Tool: Designed to gently lift dirt and dust from delicate upholstery fabrics. Ideal for sofas, chairs, and other furniture.
  • Crevice Tool: Engineered for deep cleaning in tight spots like edges, corners, and narrow gaps. Versatile for various surfaces, including car interiors and household appliances.
Corner Cleaning Set with various nozzles

Image: The Corner Cleaning Set includes a Wide Flat Nozzle with a built-in brush for deep cleaning mattresses and sofas, and a Standard Nozzle for general use.

4. Remove and Install the Dust Bucket

  1. Remove: Press both dust cup release buttons simultaneously with one hand, and lift the dust cup upwards with the other hand.
  2. Install: Align the dust cup limit buckle, press down the dust cup until you hear a click sound, indicating proper installation.
Dustbin emptying and washing steps

Image: Steps for one-click dustbin emptying and washing the dustbin components.

5. Mopping Function Assembly

The water tank assembly can be attached to the bottom of the floor brush for simultaneous vacuuming and mopping:

  1. Fill the tank with water, evenly dampen the mop pad, then attach both the mop pad and the water tank.
  2. Fix the water tank firmly onto the floor brush.
  3. Press the "Open" button to activate the water flow system, which releases water through air pressure difference.
  4. After cleaning, pour out remaining water and press "Close" to prevent floor wetting.

Important Notes for Mopping:

  • Clean mop pad after each room.
  • Never add cleaning solutions (risk of corrosion).
  • The water-filled tank increases overall weight and operating resistance - this integrated design is industry-standard for combo units.

6. Using the Telescopic Tube

Press the folding tube adjustment button to fold the tube. Lift the folding tube upward until you hear a clicking sound, and the tube will lock into a straight position.

Foldable wand and self-standing feature

Image: The ergonomic foldable wand (25.59 inches) allows reaching under furniture without bending, and the practical self-standing function for quick breaks.

7. Wall Hanger Installation and Use

  1. Install the Wall Hanger: Insert the expansion tube into the pre-mounting holes on the wall. Thread two fixing screws through the two mounting holes of the wall hanger, align them with the expansion tube holes, insert the screws, and tighten clockwise.
  2. Use the Wall Hanger: After the wall mount is fixed, hang the vacuum on the charging wall mount. Insert the vacuum cleaner's attachment into the fixing holes of the side wall mount to secure it. Insert the adapter into the charging wall mount's hole; the machine will charge automatically when hung.

Operating the Vacuum Cleaner

1. Charging the Vacuum

  1. Insert the charging adapter plug into an AC outlet, then insert the adapter charging head into the main unit for direct charging.
  2. You can also dismantle the battery pack and use the adapter to charge it separately.
  3. Insert the charging adapter into the charging wall mount, then place the main unit directly on the wall mount for charging.

2. Switching On/Off and Changing Modes

Intelligent LED Display

Image: The intelligent LED display shows remaining battery percentage, visual alerts for brush blockages, and the current cleaning mode (Eco, Standard, Turbo).

  • Power Button: With sufficient power, click the power button to turn on the machine. Click it again to turn off the machine.
  • The machine defaults to ECO mode upon power-on. Click the adjustment button again to switch to NORMAL mode, then again to switch to TURBO mode. (The machine will shut down if the power button is clicked in any mode).

3. LED Display Indicators

  • Charge Protection: 100% battery is displayed when fully charged after powering on.
  • Remaining Battery: In discharging state, if battery level is below 10%, the display screen does not flash, but the "min" icon flashes until the device powers off. If the device is out of battery and the power button is pressed, "0" displays and flashes twice per second for 5 seconds, with the "min" indicator staying steadily lit. The device cannot be started.
  • HEPA Filter Not Installed: If the dustbin or HEPA filter is not installed, the HEPA missing warning indicator flashes red and turns off after 8 seconds. The main unit will not power on.
  • HEPA Cleaning Reminder: After 15 hours of use, the HEPA cleaning indicator will flash green. The machine can continue to operate. After cleaning the HEPA filter, press and hold the "Mode" speed adjustment button for 5 seconds to reset. The HEPA cleaning light will then turn off.
  • Floor Brush Blocking Protection: If the floor brush is blocked, the brush will stop after 1 impact. The host will not stop, but the icon will flash at 0.6Hz for 8s.
  • Duct Clogging Protection: If duct clogging is detected, the icon will blink at 0.6Hz for 8s after shutdown.
GreenEye Technology in action

Image: GreenEye Technology with built-in LED illumination system, showing a beam range of 17.72 inches and a beam angle of 130° to reveal invisible dust.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Ultenic U18 Power Pro.

1. Clean the Dust Bucket and Filter

Advanced 6-Stage Filtration System diagram

Image: Diagram of the 6-stage filtration system, including Centrifugal Separator, Stainless Steel Filter, Multi-Cyclonic System, Pre-Motor Foam Filter, HEPA Filter, and Exhaust Foam Filter.

  • Components: HEPA, Sponge, Monocone Filtration, Stainless Steel Strainer, Centrifugal Sedimentation.
  • Clean the HEPA: If the vacuum cleaner is blocked or suction drops significantly, the HEPA should be cleaned. Remove the dust bucket, take out the HEPA, remove dust from it, tap the HEPA, or wash it with clean water. Dry the HEPA in the sun, then put it back into the dust bucket after it is completely dry. Do not bend or twist the HEPA during cleaning or rinsing. The HEPA can only be used after being completely dried.
Easy Cleaning & Maintenance steps

Image: Step-by-step guide for easy cleaning and maintenance: 1. One-press dustbin empty, 2. Remove HEPA filter, 3. Rinse clean, 4. Air dry.

2. Cleaning the Electric Floor Brush

  1. Push the lock button down to the unlocked state, and take out one end of the roller brush to remove the whole brush. Note: Some dust may fall out when pulled.
  2. Clean any wound hair or debris from the roller brush. If washed with water, it must be dried after rinsing before it can be put back to use.
Anti-tangle Floor Brush comparison

Image: Comparison showing the effectiveness of the V-shaped roller brush in eliminating hair tangles compared to a standard brush.

Troubleshooting

If you encounter any issues with your Ultenic U18 Power Pro, refer to the table below for common problems and solutions.

Fault Possible Issues Solution
The machine cannot be started The battery is not installed correctly
The battery is dead
Please install the battery correctly
Charge the battery
Vacuum cleaner has no suction / suction becomes smaller The dustbin is full
The suction of the dust pipe or floor brush is blocked by a foreign body
Dustbin or HEPA is not installed correctly
Filter HEPA blockage
Please empty the rubbish in the dustbin
Clean up the suction of the dust pipe or floor brush
Reinstall the dustbin and HEPA
Clean and filter HEPA, dry it and put it back
Dust is leaking from the air outlet HEPA is not installed correctly Install HEPA correctly
The roller brush stops turning, and the floor brush blockage indicator lights up in red The roller brush is entangled or stuck, resulting in protection Clear the winding or blockage and turn it back on
The full dust indicator lights up in red The dustbin is full The dustbin needs to be dumped

Note: This vacuum cleaner must be used with the original battery and power adapter. Do not use the battery for any purpose other than this vacuum cleaner.

Specifications

Please use the original charger of this product for charging.

Attribute Value
Brand Ultenic
Model U18 Power Pro
Type Cordless Stick Vacuum
Suction Power 55000Pa (55KPA)
Motor 600W
Run Time Up to 80 minutes
Charging Time 4–5 hours
Battery Capacity 2500mAh
Dustbin Capacity 1L
Filtration Layer 6 layers
Noise Level ≤78 dB (Ultra-quiet 62 dB in Eco mode)
Working Voltage 29.6V
Adapter Rated Input 100-240V~50/60Hz
Adapter Rated Output 36V 0.5A
Product Weight 3.34 kg
Product Size (L x W x H) 365 mm × 130 mm × 270 mm
Package Weight 4.2 kg
Package Size (L x W x H) 440 mm × 320 mm × 210 mm

User Tips

  • Pet Owners Rejoice: The anti-tangle V-shaped roller brush is highly effective at picking up pet hair without tangles, significantly reducing maintenance.
  • Convenient Pauses: Utilize the self-standing feature for quick breaks during cleaning, such as answering the door or phone, without needing to lean the vacuum against a wall.
  • Reach Every Corner: The ergonomic foldable wand is excellent for cleaning under low furniture like sofas and beds without having to move them or bend down.
  • Consistent Suction: The multi-cyclone system helps maintain strong suction power and prolongs the life of the HEPA filter by preventing saturation.
  • Easy Storage & Charging: Make use of the 2-in-1 wall mount charging dock for neat storage and automatic charging, eliminating cable clutter.

Warranty and Support

For after-sales service, warranty registration, or if you encounter any issues during use or need to replace accessories, please contact the manufacturer directly.

  • Customer Service Email: support@proscenic.com (Note: This email is provided in the generic user manual PDF. Please verify with Ultenic for specific support channels if needed.)
  • Warranty Registration: Scan the QR code provided in the original packaging to activate your warranty.

An additional user manual (PDF) is available for reference, which provides detailed instructions and diagrams for a similar handheld vacuum cleaner. You can access it here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.