1. Setup Instructions
1.1 Download the HryFine App
To begin, scan the QR code below to download and install the HryFine app on your smartphone. This application is compatible with Android 5.0 and above, and iPhone 9.0 and above.

1.2 Charging and Activation
Before initial use, ensure your ERUN Smartwatch is fully charged and activated:
- Use the provided wireless charging electromagnetic suction cup. Attach it to the back of the watch for wireless charging.
- Always use a 5V 1A or lower charger for the device.
- Only use certified chargers. Keep the watch dry and do not disassemble it or expose the battery to extreme conditions.
- Keep small parts out of reach of children.
1.3 Connecting the Watch to Your Phone
There are two primary methods to connect your smartwatch to the HryFine app:
Method 1: Search and Connect
- Open the HryFine app and set up your personal profile.
- Navigate to the 'Device' section and tap 'Add Device'.
- Ensure your mobile phone's Bluetooth is enabled.
- Select your ERUN Smartwatch from the list of scanned devices to complete the binding.
- If the watch remains powered on for more than 120 seconds without connecting to the app, its Wireless function will automatically deactivate. To reconnect, you must manually enable 'Wireless ON/OFF' within the watch's 'Settings > Watch' menu, then repeat the connection steps.
Method 2: Scan QR Code
- Open the HryFine app and set up your personal profile.
- Navigate to the 'Device' section and tap 'Add Device'.
- On your watch, display the connection QR code (usually found in 'Settings > General > Connect Phone').
- Within the HryFine app, open the 'Scan' function (typically located in the upper right corner) and scan the QR code displayed on your watch.
Troubleshooting Connection: If connection attempts fail, verify that your phone is not currently connected to other Bluetooth devices. If the watch accidentally resets to factory settings, repeat the entire connection process.
1.4 Managing Message Notifications on Your Phone
To ensure you receive notifications from your smartwatch, you may need to adjust your phone's settings:
For Apple Devices:
- Go to your phone's 'Settings' and find 'APPS'.
- Locate 'HryFine' in the app list.
- Adjust the notification settings to 'Allow Notifications' as desired (e.g., Lock Screen, Notification Center, Banners).
For Android Devices:
- Go to your phone's 'App Management' (or similar, e.g., 'Apps' in Settings).
- Locate 'HryFine' in the app list.
- Adjust the notification settings to 'Allow Notifications' as desired. You can customize options like sound, vibration, and display style.
2. Operating Instructions
2.1 Basic Navigation
- Swipe Down: Access quick settings and shortcuts.
- Swipe Up: View recent notifications.
- Swipe Left/Right: Navigate through various watch features and widgets.
2.2 Key Features and Functions
- Wireless Call Capability: After connecting the watch to the HryFine app and synchronizing with your phone, you can make, answer, or reject calls directly from the watch.
- Message Notification: To receive all messages and social media notifications, ensure notification authorization is enabled in your phone settings for the HryFine app.
- Voice Assistant Integration: With built-in voice assistant support, the ERUN Smartwatch enables hands-free command execution for a seamless experience.
- Sports Mode: Enter the exercise mode selection interface (running, rope skipping, cycling, climbing) to start data monitoring.
- Exercise Record: Records all exercise data from your workouts.
- Pedometer: Counts your daily step data. This data is typically cleared at 00:00 and can be viewed in the HryFine app.
- Remote Shutter (Photo Control): When connected to the phone, open the camera mode in the HryFine app interface. Click or shake the watch to take photos, which will be automatically saved to your phone.
- Music Players: After connecting the device, your phone can remotely control the music player via the watch.
- Find Mobile Phone: Tap the watch to activate the 'Find Mobile Phone' function. Long press the magnifying glass icon on the watch, and your mobile phone will ring.
- Weather: The watch can display weather information for the current location, updated via the HryFine app.
- Stopwatch: Tap the start button on the stopwatch page to begin timing, and tap the stop button to stop timing.
- Alarm: Alarms can be set in the HryFine app or directly on the watch. Up to 8 alarms can be set. The watch will display an alarm icon and vibrate at the set time.
- Sedentary Reminder: Set the sedentary time. When the time comes, the bracelet will vibrate to remind you to move, and the interface will show a reminder label.
- Always on Display: After setting, the watch screen will show the time even after it turns off.
- Watch Face Style: The UI style can be changed to customize your watch face.
- Brightness: You can set the brightness level and the time before the backlight turns off.
- Settings: You can turn vibration on or off and adjust the volume.
- Language: After connecting to the HryFine app, you can set the language in the app or on the watch, and the language will synchronize.




3. Maintenance
3.1 General Care
- Use only certified chargers.
- Keep the device dry.
- Do not disassemble the watch or expose its battery to extreme conditions.
- Keep small parts out of reach of children.
3.2 Cleaning
Gently wipe the watch and band with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
3.3 Band Replacement
The watch band is detachable, allowing for easy replacement or customization.
4. Troubleshooting
4.1 Why the watch cannot receive push notifications?
If you are not receiving notifications on your smartwatch, check the following settings on your phone:
Phone Settings:
- Ensure the message push on/off switch is enabled in your mobile phone settings.
- Verify that the message can be displayed in your phone's notification bar. If there are no notifications on the phone, the device will not be able to receive them.
- Check notification settings in your phone to ensure multimedia message alerts are enabled.
Accessibility Settings:
- Turn on accessibility settings for the HryFine app in your phone's settings.
4.2 Connection Issues
- If the watch is on for more than 120 seconds without connecting to the app, it will automatically turn off Wireless. You must turn on 'Wireless ON/OFF' in the watch's 'Settings > Watch' menu to reconnect.
- If connection steps fail, check if your phone is connected to other Bluetooth devices. If not, and if the watch accidentally restored factory settings, repeat the connection process from the beginning.

5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ERUN |
| Department | Unisex-adult |
| Voice Assistant Built-in | Yes |
| Bluetooth Version | 5.4 |
| Support Alexa | Yes |
| Metrics Measured | Sleep Monitor |
| Activity Tracked | Steps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker |
| Touch Screen | Yes |
| Category | Smart Watches |
| App Name | Hry fine |
| Screen Material | TFT |
| APP Download Available (on watch) | No |
| Battery Detachable | No |
| Movement Type | Electronic |
| Style | SPORT |
| Application Age Group | Adult |
| Screen Shape | Round |
| Clasp Type | Hook Buckle |
| Wearable Computer Type | Smart watch |
| Band Material | Silica Gel |
| Waterproof Grade | Not waterproof |
| SIM Card Available | No |
| Mechanism | No |
| Multiple Dials | Yes |
| GPS | No |
| Network Mode | None |
| Rear Camera | None |
| ROM | <128MB |
| System | None |
| Type | On Wrist |
| Compatibility | All Compatible |
| Language | English, Russian, Spanish, Portuguese, Turkish, Italian, French, German, Norwegian, Ukrainian, Dutch, Arabic |
| Function | Passometer, Message Reminder, Call Reminder, Answer Call, Dial Call, Push Message, Alarm Clock, Calorie Counter, Calendar, Calculators |
| Battery Life | 2-3 days |
| Display Size | 1.5 inches |
| RAM | <128MB |
| Battery Capacity | 180-220mAh |
| Resolution | 280p |
| Origin | Mainland China |
| Band Detachable | Yes |
| WIFI | No |
| Package Length | 17 cm |
| Package Width | 14 cm |
| Package Height | 3 cm |
| Package Weight | 0.141 kg |

6. User Tips
- Display Size: The watch features a 1.5-inch display, providing ample screen real estate for notifications and interactions.
- Phone Compatibility: The ERUN Smartwatch is 'All Compatible', meaning it can connect to various smartphones, including Samsung devices.
- Water Resistance: Please note that this smartwatch is Not waterproof. Avoid exposure to water (e.g., swimming, showering) to prevent damage.
7. Warranty and Support
7.1 Electronic User Manual (PDF)
A detailed user manual in PDF format is available for download. You can find the direct link on the seller's product page or refer to the QR code provided in the setup section for general instructions. The PDF manual URL is: User manual (PDF)
7.2 FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
7.3 Warranty Information
For specific warranty terms and conditions, please refer to the seller's policy or contact customer support directly.