HIEHA 2026

Contents

HIEHA 2026 Multi-function Car Jump Starter User Manual

Model: 2026 (L8 Smart Air Pump)

1. Introduction

Thank you for choosing the HIEHA 2026 Multi-function Car Jump Starter. This device is a versatile emergency tool designed to provide reliable assistance for your vehicle and other needs. It integrates a powerful car jump starter, a portable tire inflator, a high-capacity power bank, and a multi-mode LED flashlight into one compact unit.

HIEHA 2026 Multi-function Car Jump Starter with clamps and air hose

Figure 1: HIEHA 2026 Multi-function Car Jump Starter

This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your device. Please read it thoroughly before first use and keep it for future reference.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.

  • HIEHA 2026 Jump Starter (Jump Air Pump)
  • Emergency Start Power Clip (Jump Clamps)
  • Air Tube
  • Multi-nozzles (Presta Valve Adapter, Ball Needle, etc.)
  • Type-C Charging Cable
  • User Manual
Contents of the HIEHA 2026 package including jump starter, air tube, clamps, and nozzles

Figure 2: What's in the Box

3. Specifications

FeatureSpecification
Peak Current4000A
Battery Capacity15000mAh (60C Power Polymer Battery)
Vehicle Compatibility12V vehicles, up to 8.0L Gas / 7.0L Diesel engines
Inflation Range0-150 PSI
Charging TimeApprox. 2-3 hours
Working Temperature-20°C to 70°C (-4°F to 158°F)
MaterialABS+PC
Item Weight1500g
Fast Charge OutputQC3.0 (One Way Fast Charge)
Reverse Output5V/1A
Charging VoltageDC 12V
CertificationsCE, FCC, ROHS, UL

4. Safety Instructions

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

4.1 Built-in Safety Protections

Your HIEHA 2026 device is equipped with multiple safety features to ensure safe operation:

  • Low Voltage Protection: Prevents damage from excessively low voltage.
  • Reverse Polarity Protection: Protects against incorrect connection of positive and negative terminals.
  • Short-circuit Protection: Automatically shuts off in case of a short circuit.
  • Overload Protection: Prevents damage from excessive current draw.
  • High Temperature Protection: Shuts down if internal temperature exceeds safe limits.
  • Over Discharge Protection: Protects the battery from being fully depleted.
  • Spark-proof Protection: Designed to prevent sparks during connection.
  • Over Current Protection: Guards against excessive current flow.
Internal diagram showing safety protection features like low voltage, reverse polarity, short-circuit, overload, high temp, over discharge, spark-proof, and over current protection

Figure 3: Internal Safety Protection Features

Jumper cable protection icons for overload, low voltage, high voltage, reversed, high temperature, and short circuit

Figure 4: Jumper Cable Protection

4.2 General Safety Precautions

  • Always fully charge the device before its first use.
  • Follow all instructions carefully to avoid misoperation and potential hazards.
  • Do NOT run the air pump continuously for more than 6 minutes. Allow it to cool down for at least 10 minutes after each 6-minute cycle to prevent overheating.
  • Keep the device away from children.
  • Do not expose the device to rain or wet conditions.
  • Do not disassemble the device. Refer all servicing to qualified personnel.
  • If mist appears in cold weather, it is normal and not smoke.
  • Ensure proper ventilation when operating the device.

5. Setup

5.1 Initial Charging

Before using your HIEHA 2026 for the first time, it is crucial to fully charge it. Connect the provided Type-C charging cable to the device's input port and to a suitable USB power adapter (not included). The LED display will indicate the charging status. Once fully charged, the battery indicator will show full bars.

5.2 Familiarization

Take a moment to familiarize yourself with the device's ports, buttons, and display:

  • LED Display: Shows battery level, pressure readings (PSI, BAR, KPA, Kg/cm²), and operational status.
  • Power Button: Turns the device on/off.
  • Light Button: Activates and cycles through flashlight modes.
  • '+' / '-' Buttons: Adjust target pressure for inflation.
  • Mode Button: Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units.
  • USB Output Port: For charging external devices.
  • Type-C Input/Output Port: For charging the device or external devices.
  • Air Hose Connector: For attaching the air tube.
  • Jump Start Port: For connecting the emergency start power clip.

6. Operating Instructions

6.1 Jump Starting a Vehicle

Ensure your vehicle's battery is 12V and within the supported engine size (up to 8.0L Gas / 7.0L Diesel).

  1. Connect Clamps: Attach the red clamp to the positive (+) terminal of your vehicle's battery and the black clamp to the negative (-) terminal. Ensure a secure connection.
  2. Power On: Connect the emergency start power clip to the jump start port on the HIEHA device. Power on the jump starter.
  3. Start Vehicle: Go into your vehicle and start the engine.
  4. Power Off & Disconnect: Once the vehicle starts, immediately disconnect the emergency start power clip from the jump starter, then remove the clamps from the car battery.
Four steps for jump starting a car: 1. Attach clamps, 2. Power on, 3. Start vehicle, 4. Power off

Figure 5: Easy Steps for Jump Starting

Chart showing various vehicle types and their corresponding engine displacement limits for jump starting, including basketball, bicycle, locomotive, bridge car, off-road vehicle, and truck

Figure 6: Vehicle Compatibility for Jump Starting

6.2 Inflating Tires and Other Items

The device can inflate tires up to 150 PSI and features an auto-stop function when the preset pressure is reached.

  1. Connect Air Tube: Screw the air tube securely into the device's air hose connector. Attach the other end of the air tube to the tire valve or use the appropriate nozzle for other inflatables (e.g., ball needle, Presta valve adapter).
  2. Power On: Press the power button to turn on the device. The LED display will show the current pressure.
  3. Select Mode & Unit: Press the 'Mode' button to cycle through different inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, Kg/cm²).
  4. Set Target Pressure: Use the '+' and '-' buttons to set your desired pressure.
  5. Start Inflation: Press the power button again to start the air pump. The device will automatically stop once the preset pressure is reached.
  6. Disconnect: Remove the air tube from the item and the device.
HIEHA device displaying real-time tire pressure on a large LED screen next to a car tire

Figure 7: Real-time Tire Pressure Detection

Examples of items that can be inflated: car tires, motorcycle tires, bicycle tires, and basketballs

Figure 8: Versatile Inflation for Various Items

6.3 Using as a Power Bank

The HIEHA 2026 features a 15000mAh battery and QC3.0 fast charging to power your mobile devices.

  1. Connect Device: Use a compatible USB or Type-C cable to connect your phone, tablet, laptop, or other USB-powered device to the HIEHA's USB output port or Type-C port.
  2. Charging: The HIEHA device will automatically begin charging your connected device.
HIEHA device charging a smartphone and a tablet, illustrating its power bank functionality

Figure 9: High Capacity Power Bank Functionality

6.4 Using the LED Flashlight

The built-in LED flashlight offers multiple modes for various situations.

  1. White Light: Press the light button once to turn on the bright white LED light.
  2. Slow Red Flash: Press the light button again for a slow red flashing light.
  3. Slow Blue Flash: Press the light button a third time for a slow blue flashing light.
  4. Quick Red & Blue Flash (SOS): Press the light button a fourth time for a quick alternating red and blue flash, suitable for SOS signals.
  5. Turn Off: Press the light button a fifth time to turn off the flashlight.
Image showing the 3-in-1 LED flashlight modes (strobe, flash, SOS) and use cases like wilderness camping, roadside emergency, vehicle maintenance, and power failure

Figure 10: 3-in-1 LED Flashlight Modes and Uses

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Recharging: If the device is not used for extended periods, recharge it every 3-6 months to maintain battery health and prolong its lifespan.
  • Cable Care: Inspect all cables and connectors regularly for any signs of damage. Replace if necessary.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is depleted.Charge the device fully.
Air pump stops unexpectedly.Over-temperature protection activated (pump ran for >6 minutes).Allow the device to cool down for at least 10 minutes before restarting.
Vehicle does not jump start.Incorrect clamp connection; vehicle battery completely dead; device battery low.Ensure clamps are connected correctly (red to +, black to -). Fully charge the HIEHA device. If vehicle battery is severely discharged, it may require professional assistance.
Device not charging external devices.Device battery low; cable issue.Charge the HIEHA device. Try a different charging cable.

9. User Tips

  • This device is effective for airing up vehicle tires, such as those on a Jeep Liberty Sport.
  • The built-in flashlight is notably bright and useful for various situations.
  • The included carrying case is convenient for storage and transport, helping to keep all accessories organized.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the seller directly. Keep your proof of purchase for warranty claims.

For further detailed instructions or specific troubleshooting not covered in this manual, please consult the official user manual PDF available from the seller or manufacturer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.